
XPC56xxMB2
The XPC56xxMB2 motherboard is an evaluation system supporting the Freescale MPC56xx MPUs.
Buy OptionsThe XPC56xxMB2 motherboard is an evaluation system supporting the Freescale MPC56xx MPUs.
Buy OptionsThe XPC563M EVB is an evaluation system supporting the NXP MPC563xM microprocessors.
Buy OptionsKIT33905D5EKEVBE is an evaluation kit for 33904B5, 33905BD5, and 33905DS5 system basis chips providing power management for MCU sensors and CAN transceivers
Buy OptionsThis KIT33905BD3EVBE evaluation board allows the user to implement the functionality of the 33905D3 and 33904B3 System Basis Chips (SBC). Gen2 with CAN and LIN
Buy OptionsKIT33903BD3EVBE evaluation kit allows to implement the functionality of the MC33903BD3, a System Basis Chip (SBC) Gen2 with CAN and LIN
Buy OptionsThe KIT33903BD5EVBE evaluation board allows you to implement the functionality of the MC33903D5 System Basis Chip (SBC), a System Basis Chip (SBC) Gen2 with CAN and LIN
Buy OptionsSoftware offered 'As is', support provided on NXP® Communities only – SWT is set for window mode from 0.8 to 1.2sec @8MHz oscclk
Software offered 'As is', support provided on NXP® Communities only – The example sends Hello text via ESCI_A with 9600bps in interrupt mode
Software offered 'As is', support provided on NXP® Communities only – ESCI_B in polling and loopback mode, data format 1/9/1 where 9th bit is a parity bit.
Library of instruction tests for the Power Architecture e200Zx family of MCU cores. Includes instruction tests for VLE, BookE, and SPE instruction sets . Includes report of the percentage of instructions that are covered by the tests (instruction coverage). Libary is not device specific and can be used with any MPC56xx using a Power Architecture e200Zx core.
CodeWarrior Development Studio for MPC55xx/MPC56xx v2.10 is a comprehensive development tool suite designed to enable embedded developers to meet the pressures of shorter project life cycles.
IDE and Build Tools
Our CodeWarrior for MCU's v11 integrates the development tools for the ColdFire. ColdFire+, DSC, Kinetis. Qorivva, RS08, S08 and S12Z architectures into a single product based on the Eclipse open development platform. Eclipse offers an excellent framework for building software development environments and is a standard framework used by many embedded software vendors.
IDE and Build Tools
CodeWarrior Development Studio for eTPU is a full-feature, Eclipse-based IDE for eTPU, eTPU2 and eTPU2+ application development. It contains a standalone C cross-compiler, preprocessor, assembler, linker, simulator, and debugger.
IDE and Build Tools
MCAT is an HMTL-based user-friendly graphic plug-in for the FreeMASTER debugger tool for developing Permanent Magnet Synchronous Motor (PMSM) field-oriented control (FOC) applications with real-time control structure parameter tuning. MCAT helps adapt NXP motor control solutions without needing in-depth knowledge of Proportional Integral (PI) control constant calculations.
Application Development Tools
AUTOSAR is an industry-wide and open software architecture for automotive Electronic Control Units (ECUs)
AUTOSAR
AUTOSAR (Classic) v3.0 rev 3 microcontroller abstraction layer drivers for ADC, CAN, DIO, FLS, GPT, ICU, LIN, MCU, PORT, PWM, SPI, WDG, plus additionally FEE. Tested with Green Hills MULTI, Wind River DIAB, CodeWarrior. AUTOSAR configuration tool EB tresos Studio included, solely for use with drivers of this package. Conditions of use for this software and other general information at www.autosar.org and at AUTOSAR .
AUTOSAR (Classic) v3.0 rev 3 compliant operating system. Tested with Green Hills MULTI, Wind River DIAB, CodeWarrior. AUTOSAR configuration tool EB tresos Studio included, solely for use with drivers of this package. AUTOSAR v4.x should be preferred over this version. Conditions of use for this software and other general information at www.autosar.org and at AUTOSAR .
P and E’s USB Multilink Universal FX is a high-speed, all-in-one development interface which allows PC access to the Background Debug Mode or JTAG interface.
Emulators, Probes, and Programmers
Supports many NXP processor families and offers on-board storage of programming images, provides power to the target, supports manual or automated programming, and has an easy-to-use touchscreen interface.
Emulators, Probes, and Programmers
The MPC55xx family of adapters convert processor or other PGA adapters to a different pin count.
Adapters, Cables, Sockets
The Qorivva MPC5634M 32-bit MCUs are ideal for applications such as motorcycles, automotive 4-cylinder engine control and hybrid electric motors.
Evaluation and Development Boards
The VertiCal system is designed to enable the use of new enhanced automotive calibration and debug tools on the MPC563x family of automotive microcontrollers.
Evaluation and Development Boards
The XPC563M EVB is an evaluation system supporting the NXP MPC563xM microprocessors.
Evaluation and Development Boards
The KIT33903BD5EVBE evaluation board allows you to implement the functionality of the MC33903D5 System Basis Chip (SBC), a System Basis Chip (SBC) Gen2 with CAN and LIN
Evaluation and Development Boards
This KIT33905BD3EVBE evaluation board allows the user to implement the functionality of the 33905D3 and 33904B3 System Basis Chips (SBC). Gen2 with CAN and LIN
Evaluation and Development Boards
The XPC56xxMB2 motherboard is an evaluation system supporting the Freescale MPC56xx MPUs.
Evaluation and Development Boards
KIT33905D5EKEVBE is an evaluation kit for 33904B5, 33905BD5, and 33905DS5 system basis chips providing power management for MCU sensors and CAN transceivers
Evaluation and Development Boards
KIT33903BD3EVBE evaluation kit allows to implement the functionality of the MC33903BD3, a System Basis Chip (SBC) Gen2 with CAN and LIN
Evaluation and Development Boards
Lead-free VertiCal Calibration 32-bit synchronous SRAM daughter card for use with any VertiCal Base Board.
Evaluation and Development Boards
emWin the most efficient and comprehensive GUIs available. It is written in ANSI C and supports any display controller, display and CPU. emWin includes the AppWizard GUI design tool and a Simulation Environment to help speed your development.
Green Hills offers scalable suite of integrated communication stacks, middleware and graphics solutions, including secure networking stacks and protocols, SNMP, web applications, wireless, CORBA, USB, CAN and advanced file systems.
emSecure is a SEGGER software package that allows creation and verification of digital signatures. emSecure can be used in numerous applications to prevent cloning and tampering with the device it runs on. It is optimized for embedded systems
emFile is an embedded file system which can be used with any type of storage device. A Microsoft Windows compatible FAT12/16/32 format, and a proprietary SEGGER EFS format are available. Support for NAND, NOR, SD, SDHC, MMC, eMMC, IDE, CompactFlash.
A fully verified Wi-Fi protocol stack complimented by powerful debug tools that assist to reduce development time. Together they form a complete ecosystem for the development of embedded Wi-Fi applications
ClarinoxBlue: a fully verified Bluetooth Classic, Bluetooth Low Energy and mesh protocol stack encapsulated within a C/C++ based framework & supported with debug tools to provide a complete development ecosystem.
The royalty free micro velOSity microkernel is the smallest of the Green Hills RTOS family. It is minimal footprint, 2.6 KB, and simple programming interface are perfect for lightweight applications.
EB tresos AutoCore OS is an embedded real-time operating system that implements the latest AUTOSAR standard and all its scalability classes, including memory protection. It is available in single-core and multicore versions.
Green Hills C and C++ compilers generate highly optimized code for NXP processors while strictly adhering to industry-standard language requirements.
This book provides developers and system designers with a complete understanding of eTPU programming. Available in English and Japanese.
Develop with industry proven tools for C/C++ embedded applications, including compilers and run-time libraries, source- and assembly-level debugger, integrated development environment (IDE). Supports bare metal, Linux, Nucleus, other OS's.
MULTI is a complete Integrated Development Environment (IDE) for embedded applications for C/C++, Embedded C++ and includes an advanced debugger, profiler, run-time memory checking, project builder, editor, instruction set simulator, and more.
Multi-target (eTPU/MC33816/generic host) development tool with build & simulation IDE.
Free command-line edition of the popular Sourcery CodeBench development tools. Available for NXP ARM and Power Architectures for bare metal bring-up, code debug in cache, ROM, RAM, Flash. Available now for free download.
Full IDE with editor, build, project management, state machine editor/compiler, and enhanced sim features such as a waveform viewer that displays both digital and discrete nodes. Comes with ETEC, the most full-featured eTPU C compiler on the market.
Wind River Diab Compiler has been helping developers create safety-critical applications in the automotive, industrial, medical, and aerospace industries.
The MULTI advanced multicore debugger for C/C++ applications running on simulators, bare-board, INTEGRITY, u-velOSity, Linux native, Linux virtualized and home-grown.
UDE is a debug, trace and test platform for a wide range of embedded systems. It supports the debugging of multicore targets within one consistent user interface. Run-time analysis and outstanding scripting capabilities are more key features.
Free of charge instruction set simulator with the same powerful user interface and features of the TRACE32 debug and trace tools. With API for peripheral simulation. A license is required if used in automated test environments.
You can rely on a consistent, single-tool environment for electronic control unit (ECU) development with AUTOSAR. EB tresos Studio lets you configure, validate, and generate your ECU basic software (BSW).
OSBDM/OSJTAG resource page, including links for OSBDM/OSJTAG virtual toolkit, firmware updates, driver downloads, design documents, and related information.
A set of Windows-based applications that function with the OSJTAG on NXP's tower board. Includes accelerometer, firmware updater, serial re-director, serial grapher, and terminal application.
The UAD3+, equipped with up to 4 GB of trace memory and powerful interfaces to target and host, is the right solution for trace, multicore debugging, profiling and code coverage analysis. Parallel and high-speed serial trace (AURORA) is supported.
Lauterbach has over 40 years of experience in making world class microprocessor development tools. TRACE32 supports technologies like JTAG, SWD, NEXUS or ETM with embedded debuggers and real-time trace solutions for all NXP processor series.
Lauterbach has over 40 years of experience in making world class microprocessor development tools. TRACE32 NEXUS for is a high-end debug and trace system for MPC5XXX with parallel NEXUS trace port. eTPU, SPT and GTM debuggers are included.
Hardware Emulation and Trace system for embedded development with NXP’s Power Architecture® devices featuring (i) Non-intrusive debugging, (ii) Full Instruction Trace and Data Trace, and (iii) Performance Analysis and Code Coverage Analysis
Advanced Cyclone programmer. Models support high-speed in-circuit flash programming, debugging, and test of many NXP 8-/16-/32-bit MCUs. Enhanced speed/security/storage. Stand-alone or host-controlled operation. Programs internal & external flash.
Multilink Universal FX is a high-speed,BDM/JTAG debug probe for Kinetis, LPC, S32, Qorivva MPC5xxx, MPC5xx/8xx, ColdFire, HC(S)12(X), S12Z, HCS08, RS08, DSC, 683xx, & HC16 devices. Supports SWO debug tools in NXP's MCUXpresso IDE.
The (UAD2next) combines the state-of-the-art debugging features and CAN with trace capabilities. It can be extended by plugin trace modules supporting e.g. ARM CoreSight parallel trace and AURORA serial trace and is equipped with 512MB trace memory.
Production programmer. Models support high-speed, low-cost, in-circuit flash programming, debugging, & test of many NXP 8-/16-/32-bit systems. Stand-alone or host-controlled operation. USB, serial, Ethernet. Programs internal and external flash.
The USB Multilink Universal is an all-in-one BDM/JTAG debug probe for NXP Kinetis, LPC, i.MX, S32, HCS08, HC(S)12(X), S12Z, RS08, ColdFire V1/+V1, ColdFire V2-4*, Qorivva MPC5xxx, & DSC microcontrollers. Supports SWO debug tools in NXP's MCUXpresso.
The UAD2pro offers fast and flexible communication between Universal Debug Engine on the Host PC and the microcontroller target. Host interface is USB 2.0. Target interfaces also optionally isolated are JTAG, cJTAG, OnCE, SWD, CAN, ASCx and more.
Small and thin ceramic resonators and crystals that offer high oscillation frequency and remarkable oscillation tolerance, not only for consumer but also automotive applications. http://www.murata.com/products/timingdevice