Design Files
2 design files
-
Models
MML09231HT1 S-Parameters
-
Printed Circuit Boards and Schematics
MML09231H 900 MHz PCB DXF file
700-1400 MHz, 17.2 dB, 24.5 dBm, 0.36 dB NF E-pHEMT LNA
MML09231H Receive alerts
The MML09231HT1 is a single-stage low noise amplifier (LNA) with active bias and high isolation for use in cellular infrastructure applications. It is designed for a range of low noise, high linearity applications such as small cell, tower mounted amplifiers (TMA) and receiver front-end circuits. It operates from a single voltage supply and is suitable for applications with frequencies from 700 to 1400 MHz such as ISM, GSM, W-CDMA and LTE.
RF Iso 2132 - DFN 2 x 2 Package Image
Product Details
Features
- Ultra Low Noise Figure: 0.36 dB @ 900 MHz
- Frequency: 700-1400 MHz
- Unconditionally Stable over Temperature
- High Reverse Isolation: –21 dB @ 900 MHz
- P1dB: 24.5 dBm @ 900 MHz
- Small-Signal Gain: 17.2 dB @ 900 MHz (adjustable externally)
- Third Order Output Intercept Point: 37.4 dBm @ 900 MHz
- Single 5 V Supply
- Power-down Pin
- Supply Current: 55 mA
- 50 Ohm Operation (some external matching required)
- Cost-effective 8-pin, 2 mm DFN Surface Mount Plastic Package
- RoHS Compliant
- In Tape and Reel. T1 Suffix = 1,000 Units, 12 mm Tape Width, 7-inch Reel.
Documentation
Quick reference to our documentation types.
1-5 of 7 documents
-
Fact Sheet
Low Noise Amplifiers Fact Sheet
-
Package Information
98ASA00228D, QFN MAP, 2.0x2.0x0.85, Pitch 0.5, 8 Pins