Evaluation Board - QorIQ LS1 Processor DC/DC Regulator

Overview

The KITVR500EVM evaluation board supports the 34VR500V1 multi-output DC/DC regulator, with an integrated control interface for programming TBB (Try-Before-Buy) memory.

Offers high-efficiency, lower power dissipation, longer battery life
Provides flexibility to power peripherals
Lowers external component count
Enables on-the-fly voltage scaling for better system efficiency
Promotes higher light load efficiency—longer battery standby time
Delivers excellent thermal performance and improved inspection of the solder joints during fabrication process

MoreLess

Features

Input voltage operation range from 3.1 to 4.5 V
Output voltage supplies accessible through detachable terminal blocks
Four buck converters
Five general purpose LDO regulators
One DDR memory termination voltage reference
On/off push button support
Hardware configuration flexibility through various jumper headers and resistors
Integrated USB to I2C programming interface for full control/configuration
Onboard PMIC control through the I2C register map
On board connectors for interfacing with future evaluation/debug tools
Compact form factor (4 x 4 in2)
GUI software allows user to configure regulator voltages and start up sequences
LED indicators for easy monitoring of PMIC status
Standard Mini-USB connector for communication with PC
Numerous test points provide easy access for monitoring all power and signal nodes
Four layer board layout supports standard design rules

MoreLess

Features

Input voltage operation range from 3.1 to 4.5 V
Output voltage supplies accessible through detachable terminal blocks
Four buck converters
Five general purpose LDO regulators
One DDR memory termination voltage reference
On/off push button support
Hardware configuration flexibility through various jumper headers and resistors
Integrated USB to I2C programming interface for full control/configuration
Onboard PMIC control through the I2C register map
On board connectors for interfacing with future evaluation/debug tools
Compact form factor (4 x 4 in2)
GUI software allows user to configure regulator voltages and start up sequences
LED indicators for easy monitoring of PMIC status
Standard Mini-USB connector for communication with PC
Numerous test points provide easy access for monitoring all power and signal nodes
Four layer board layout supports standard design rules

Data Sheets

User Guide

Buy

KITVR500EVM Evaluation Board

KITVR500EVM Evaluation Board

KITVR500EVM Evaluation Board

Previous Next

Kit Contains

KITVR500EVM Hardware
Quick Reference Guide

Supported Devices

MC34VR500: Multi-Output DC/DC Regulator

Get Started

Get Started with the KITVR500EVM Evaluation Board

Everything you need to get started with the KITVR500EVM Evaluation Board.

Graphical User Interface (GUI) - MC34VR500 evaluation boards and development tools
User interface software for PC - GUI download for the KITVR500EVM
Type: Device Drivers

KTVR500UG, KITVR500EVM Evaluation Board - User’s Guide
This document is intended to provide a detailed description of all the features of the KTVR500UG
Type: Users Guide Format: pdf Size: 2.6 MB

KTVR500SWUG, KITVR500GUI Graphical User Interface - User’s Guide
This document is to outline the minimum hardware requirements.
Type: Users Guide Format: pdf Size: 858.6 kB

Gerber files for the KITVR500EVM-GRBR Evaluation board
Contains drill files, pcb layers/layout, silk screens, etc. (unZip with WinZip)
Type: Printed Circuit Boards

KITVR500EVM: Evaluation Board - QorIQ^® LS1 Processor DC/DC Regulator

Overview

Features

Features

KITVR500EVM Evaluation Board

KITVR500EVM Evaluation Board

Kit Contains

Supported Devices

Get Started

NEWS

KITVR500EVM: Evaluation Board - QorIQ® LS1 Processor DC/DC Regulator

Overview

Features

KITVR500EVM Evaluation Board

KITVR500EVM Evaluation Board

Kit Contains

Supported Devices

Get Started

KITVR500EVM: Evaluation Board - QorIQ^® LS1 Processor DC/DC Regulator