The FRDM-KV10Z is a low-cost development tool for the Kinetis® V
series KV1x MCU family built on the Arm® Cortex®-M0+ processor. The FRDM-KV10Z hardware is form-factor compatible
with the Arduino™ R3 pin layout, providing a broad range of expansion board options. The FRDM-KV10Z platform features OpenSDA,
the NXP® open source hardware embedded serial and debug adapter running an open source bootloader. This circuit offers several options
for serial communication, flash programming, and run-control debugging. The FRDM-KV10Z is supported by a range of NXP and
third-party development software.
Many real-time applications require mathematic functions for calculation. However, not all cores are equipped with the instruction set to cover all mathematic functions. In such use cases, the user must emulate the function through time-consuming calculations.
These are the Release Notes for the MQX™ RTOS for Kinetis SDK 1.2.0 FRDM-KV10Z Freedom development platform using the MKV10Z32VLF7 microcontroller. NXP CPU KV10Z32VLF7 belong to the Kinetis K series processor family of the 32-bit microcontrollers. The software is based on Kinetis SDK (KSDK) version 1.2.0. It includes the full set of RTOS services and a standard set of peripheral drivers.
Kinetis SDK (KSDK) is a Software Development Kit that provides comprehensive software support for Kinetis devices. The KSDK includes a Hardware Abstraction Layer (HAL) for each peripheral and peripheral drivers built
on top of the HAL. Demo and driver example applications are provided to demonstrate driver and HAL usage and to highlight the main features of supported SoCs. Also, the KSDK contains the latest available RTOS kernels, a USB
stack, and other middleware to support rapi
The Freedom development board is a set of software
and hardware tools for evaluation and development. It is
ideal for rapid prototyping of microcontroller-based
applications. The Freedom KV10 hardware, FRDMKV10Z,
is a simple, yet sophisticated design featuring a
Kinetis V series microcontroller, built on the Arm® Cortex® -M0+ core, and a perfect solution for BLDC and
PMSM motor control applications.
OpenSDA is a serial and debug adapter that is built into several NXP® evaluation boards. It provides a bridge between your computer (or other USB host) and the embedded target processor, which can be used for debugging, flash programming, and serial communication, all over a simple USB cable.
The Kinetis® Software Development Kit (SDK) provides software support for NXP's Arm® Cortex®-M based MCUs. The Kinetis SDK software includes peripheral drivers, stacks and middleware designed to simplify and accelerate application development.