EDA_Model_for_simkit_5.1_pub_designkit_zip
  • File Download

Agreement : EDA_Model_for_simkit_5.1_pub_designkit_zip

IMPORTANT: 

 

Before downloading this software carefully read the following terms and 

conditions. This Software End-User License Agreement is a binding agreement 

between you, the end-user, and NXP B.V. (hereinafter referred to as "NXP") 

regarding the use of the software accompanying this Agreement, which includes 

computer software and provided documentation (together "SOFTWARE"). 

By installing, copying or otherwise using the SOFTWARE, you agree to be bound 

by the terms of this License Agreement. 

 

                    End User License Agreement (EULA) 

 

Compact Model Acknowledgement and Copyright Notices 

 

COPYRIGHTS OF MEXTRAM ARE WITH NXP, DELFT UNIVERSITY OF TECHNOLOGY, SILVACO AND 

AUBURN UNIVERSITY. 

  •  - UNTIL 2007 MEXTRAM HAS BEEN DEVELOPED BY NXP.
  •  - FROM 2007 TO 2014 MEXTRAM HAS BEEN DEVELOPED BY DELFT UNIVERSITY OF 
  •    TECHNOLOGY. 
  •  - FROM 2014 TO 2015 MEXTRAM HAS BEEN DEVELOPED BY SILVACO. 
  •  - SINCE 2015 UNTIL TODAY MEXTRAM HAS BEEN DEVELOPED BY AUBURN UNIVERSITY. 
  •  - SEE ALSO: https://www.eng.auburn.edu/~niuguof/mextram 

 

COPYRIGHTS OF PSP AND JUNCAP2 ARE WITH NXP, ARIZONA STATE UNIVERSITY, DELFT 

UNIVERSITY OF TECHNOLOGY AND CEA-LETI. 

  •  - UNTIL 2011 PSP AND JUNCAP2 HAVE BEEN DEVELOPED JOINTLY BY NXP AND ARIZONA 
  •    STATE UNIVERSITY. 
  •  - FROM 2011 TO 2015 PSP AND JUNCAP2 HAVE BEEN DEVELOPED JOINTLY BY NXP AND 
  •    DELFT UNIVERSITY OF TECHNOLOGY. 
  •  - SINCE 2015 UNTIL TODAY PSP AND JUNCAP2 HAVE BEEN DEVELOPED JOINTLY BY NXP 
  •    AND CEA-LETI. 
  •  - SEE ALSO: https://www.cea.fr/cea-tech/leti/pspsupport/Pages/Welcome.aspx 

 

COPYRIGHTS OF L-UTSOI ARE WITH CEA-LETI. L-UTSOI IS LICENSED UNDER EDUCATIONAL 

COMMUNITY LICENSE, VERSION 2.0 (THE "LICENSE"); YOU MAY NOT USE L-UTSOI 

EXCEPT IN COMPLIANCE WITH THE LICENSE. You may obtain a copy of the license at: 

http://opensource.org/licenses/ECL-2.0 

 

COPYRIGHTS OF PSPHV ARE WITH NXP, ARIZONA STATE UNIVERSITY, DELFT UNIVERSITY 

OF TECHNOLOGY AND CEA-LETI.

 

COPYRIGHTS OF ALL OTHER MODELS IN THE SOFTWARE ARE WITH NXP. 

 

SUBJECT TO THE ABOVE, THIS SOFTWARE IS THE PROPERTY OF NXP B.V., ALL RIGHTS 

RESERVED.

 

UNDER NO CIRCUMSTANCES IS THIS SOFTWARE TO BE EXPOSED TO OR PLACED UNDER AN 

OPEN SOURCE LICENSE OF ANY TYPE WITHOUT THE EXPRESSED WRITTEN PERMISSION OF 

NXP B.V. 

 

1.   OBJECT AND SCOPE OF THE AGREEMENT 

 

     Subject to the terms and conditions of this Agreement, NXP grants to you a 

     non-exclusive, worldwide, personal, non-transferable, royalty-free license 

     under NXP's relevant intellectual property rights embedded in the 

     SOFTWARE, to: 

 

(a)  internally test, evaluate, use and make modifications of the source code 

     portions of the SOFTWARE, and to compile such source code portions and 

     modifications into object code form, for use with your products; 

 

(b)  test, evaluate, use and reproduce the above-mentioned object code as well 

     as the object code portions of the SOFTWARE, for use with your  products; 

     and 

 

(c)  incorporate the SOFTWARE and modifications, in object code form only, into 

     your products and to distribute such products. 

 

2.   LICENSE LIMITATIONS AND RESTRICTIONS 

 

2.1  The licenses granted above in Section 1 only extend to NXP intellectual 

     property rights that would be infringed by the unmodified SOFTWARE prior 

     to your preparation of any modifications. 

 

2.2  The SOFTWARE is licensed to you, not sold. Title to the SOFTWARE delivered 

     hereunder remains vested in NXP or NXP's licensor and cannot be assigned 

     or transferred. You are expressly forbidden from selling or otherwise 

     distributing the SOFTWARE or any portion thereof, except as expressly 

     permitted herein. This Agreement does not grant to you any implied rights 

     under any NXP or third party intellectual property rights. 

 

2.3  You may not translate, reverse engineer, decompile, or disassemble the 

     SOFTWARE except to the extent applicable law specifically prohibits such 

     restriction. You must prohibit your subcontractors or customers (if 

     distribution is permitted) from translating, reverse engineering, 

     decompiling, or disassembling the SOFTWARE except to the extent applicable 

     law specifically prohibits such restriction. 

 

2.4  You must reproduce any and all of NXP's (or its third-party licensor's) 

     copyright notices and other proprietary legends on copies of SOFTWARE.  

 

2.5  If you distribute the SOFTWARE to the United States Government, then the 

     SOFTWARE is "restricted computer software" and is subject to FAR 52.227-19.   

 

2.6  You grant to NXP a non-exclusive, non-transferable, irrevocable, 

     perpetual, worldwide, royalty-free, sub-licensable license under your 

     intellectual property rights to use without restriction and for any 

     purpose any suggestion, comment or other feedback related to the SOFTWARE 

     (including, but not limited to, error corrections and bug fixes).

 

2.7  You will not take or fail to take any action that could subject the 

     SOFTWARE to an Excluded License. An Excluded License means any license 

     that requires, as a condition of use, modification or distribution of 

     software subject to the Excluded License, that such software or other 

     software combined and/or distributed with the software be: 

 

     (i)   disclosed or distributed in source code form; 

 

     (ii)  licensed for the purpose of making derivative works; or 

 

     (iii) redistributable at no charge. 

 

2.8  You may not publish or distribute reports associated with the use of 

     SOFTWARE to anyone other than NXP. You may advise NXP of any results 

     obtained from your use of the SOFTWARE, including any problems or 

     suggested improvements thereof, and NXP retains the right to use such 

     results and related information in any manner it deems appropriate.

 

2.9  Open source software included in the SOFTWARE is not licensed under the 

     terms of this Agreement but is instead licensed under the terms of the 

     applicable open source license(s), such as the BSD License, Apache License 

     or the GNU Lesser General Public License. Your use of the open source 

     software is subject to the terms of each applicable license. You must 

     agree to the terms of each applicable license, or you cannot use the open 

     source software.  

 

2.10 Upon request, you must provide NXP the source code of any derivative of 

     the SOFTWARE. Unless prohibited by law, the following paragraph shall 

     apply: 

     Your modifications to the SOFTWARE, and all intellectual property rights 

     associated with, and title thereto, will be the property of NXP. 

     You agree to assign all, and hereby do assign all rights, title, and 

     interest to any such modifications to the SOFTWARE to NXP and agree to 

     provide all assistance reasonably requested by NXP to establish, preserve 

     or enforce such right. 

     Further, you agree to waive all moral rights relating to your 

     modifications to the SOFTWARE, including, without limitation, all rights 

     of identification of authorship and all rights of approval, restriction, 

     or limitation on use or subsequent modification.  

     Notwithstanding the foregoing, you will have the license rights granted in 

     Section 1 hereto to any such modifications made by you or your licensees. 

     Otherwise, you agree to grant an irrevocable, worldwide, and perpetual 

     license to NXP to make, have made, use, sell, offer to sell, import, 

     commercialize, sublicense and reproduce your modifications or derivative 

     works to the SOFTWARE without any payment to Licensee. You agree to 

     provide all assistance reasonably requested by NXP to establish, preserve 

     or enforce such right. 

 

3.   DISCLAIMER OF WARRANTIES 

 

     TO THE MAXIMUM EXTENT PERMITTED BY LAW, NXP EXPRESSLY DISCLAIMS ANY 

     WARRANTY FOR THE SOFTWARE. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT 

     WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUT 

     LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A 

     PARTICULAR PURPOSE, OR NON-INFRINGEMENT. YOU ASSUME THE ENTIRE RISK 

     ARISING OUT OF THE USE OR PERFORMANCE OF THE SOFTWARE, OR ANY SYSTEMS YOU 

     DESIGN USING THE SOFTWARE (IF ANY). NXP DOES NOT WARRANT THAT THE 

     FUNCTIONS CONTAINED WILL MEET YOUR REQUIREMENTS OR THAT THE OPERATION WILL 

     BE UNINTERRUPTED OR ERROR FREE. THEY ARE NOT OPTIMISED IN TERMS OF SPEED 

     OR SIZE. THE ENTIRE RISK AS TO THE RESULTS AND PERFORMANCE OF USE IS 

     ASSUMED BY YOU. 

 

4.   LIMITATION OF LIABILITY 

 

     IN NO EVENT WILL NXP BE LIABLE TO YOU FOR ANY LOSS OF USE, INTERRUPTION OF 

     BUSINESS, OR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL 

     DAMAGES OF ANY KIND (INCLUDING LOST PROFITS) REGARDLESS OF THE FORM OF 

     ACTION WHETHER IN CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT PRODUCT 

     LIABILITY OR OTHERWISE, EVEN IF ENDUSER HAS BEEN ADVISED OF THE 

     POSSIBILITY OF SUCH DAMAGES. 

 

     Some states or jurisdictions do not allow the exclusion or limitation of 

     incidental or consequential damages, so the above limitation, exclusion or 

     parts of it may not apply to you. 

 

5.   EXPORT COMPLIANCE. 

 

     Each party shall comply with all applicable export and import control laws 

     and regulations including but not limited to the US Export Administration 

     Regulation (including restrictions on certain military end uses and 

     military end users as specified in Section 15 C.F.R. § 744.21 and 

     prohibited party lists issued by other federal governments), Catch-all 

     regulations and all national and international embargoes. Each party 

     further agrees that it will not knowingly transfer, divert, export or 

     re-export, directly or indirectly, any product, software, including 

     software source code, or technology restricted by such regulations or by 

     other applicable national regulations, received from the other party under 

     this Agreement, or any direct product of such software or technical data 

     to any person, firm, entity, country or destination to which such 

     transfer, diversion, export or re-export is restricted or prohibited, 

     without obtaining prior written authorization from the applicable 

     competent government authorities to the extent required by those laws.

 

6.   CHOICE OF LAW; VENUE This Agreement will be governed by, construed, and 

     enforced in accordance with the laws of The Netherlands, without regard to 

     conflicts of laws principles, will apply to all matters relating to this 

     Agreement or the SOFTWARE, and you agree that any litigation will be 

     subject to the exclusive jurisdiction of the courts of Amsterdam, The 

     Netherlands. The United Nations Convention on Contracts for the 

     International Sale of Goods will not apply to this document

 

  
By declining the agreement, you will not be able to download and the window will close. Are you sure you want to decline?