SSL21083T

High voltage LED driver


Quick ordering

DistributorIn Stock
OR:  

SSL21083T is a high voltage Integrated Circuit (IC), intended to drive LED lamps from the mains supply in general lighting applications

Features and benefits

  • High-efficiency switch mode buck driver
  • Integrated 600 V power switch
  • Power-efficient boundary conduction mode of operation
  • - Zero Current Switching (ZCS) for turn-on of switch
  • - Zero voltage or valley switching for turn-on of switch
  • Direct PWM dimming possible
  • Fast transient response through cycle-by-cycle current control:
  • - Negligible AC mains ripple at LED current and minimal total capacitor value
  • - No over or undershoots in the LED current
  • Full range of Internal Protections
  • Low component count LED Driver solution
  • Compatible with wall switches with built-in indication light during standby

Applications

  • High voltage LCD backlighting for LCD monitors and televisions
  • Retrofit LED lamps in general lighting applications
All information on this product information page is subject to the subsequent disclaimers:
Go to the parametric search
Parametric search

Show functional diagram

SSL2108X
SSL2108X

Demo boards

SSL21083DB01SSL21083DB01

SSL21083 6 W Buck reference board


Parametrics of this product

SymbolParameterConditionsMinTyp/NomMaxUnit
fconvconversion frequency25200kHz
IDRAINcurrent on pin DRAIN-11A
Plamplamp powerTj < 150 °C15W
RDSondrain-source on-state resistanceTj = 25 °C456Ω
RDSondrain-source on-state resistanceTj = 125 °C67.59Ω
VDRAINvoltage on pin DRAIN600V
VCCsupply voltage814V
Vmainsmains voltage100230V

Products / Packages

Type numberOrderable part numberOrdering code (12NC)Product statusPackagePackingMarking
SSL21083T/1SSL21083T/1,1189352 960 84118Volume productionSOT96-1
(SO8) 		Tape reel smdStandard Marking

Pinning information

PinSymbolDescriptionSimplified outlineGraphic symbol
1HVhigh-voltage supply pinPin configuration for SSL2108X (SO8)SOT96-1
2SOURCElow-side internal switch
3VCCsupply voltage
4NTCLED temperature protection input
5DVDTAC supply pin
6GNDground
7GNDground
8DRAINhigh-side internal switch

Quality, reliability & chemical content

Type numberOrderable part numberChemical contentRoHSLeadfree conversion dateRHFIFR (FIT)MTBF (hours)MSLMSL LF
SSL21083T/1SSL21083T/1,118SSL21083T/1Always Pb-free11
Quality and reliability disclaimer

Quality and reliability disclaimer

Important Legal Notice on the product/generic quality information, No Warranty

NXP Semiconductors is providing this data for your convenience only. Please note however that NO WARRANTY, REPRESENTATION, GUARANTEE OR LEGALLY BINDING PRODUCT DESCRIPTION is provided by publishing this informational data, nor does NXP Semiconductors acknowledge or accept any liability related thereto. The documentation and data on NXP Semiconductors products can be found in the data sheets as officially published by NXP Semiconductors. For all purchase of products from NXP Semiconductors the NXP Semiconductors' General Terms and Conditions of Commercial Sale will apply.

NXP SEMICONDUCTORS PROVIDES THE DATA HEREUNDER “AS IS” WITHOUT WARRANTY WHATSOEVER. NXP SEMICONDUCTORS DOES NOT WARRANT OR REPRESENT THAT ANY DATA PROVIDED ON THIS WEBSITE IS CORRECT OR FIT FOR A PARTICULAR PURPOSE WHATSOEVER. IT IS PROVIDED WITHOUT ANY WARRANTY WHATSOEVER, WHETHER EXPRESS, IMPLIED OR OTHERWISE, REGARDING ITS ACCURACY, COMPLETENESS NONINFRINGEMENT OF INTELLECTUAL PROPERTY OR OTHERWISE AND MAY BE CHANGED, MODIFIED OR DELETED BY NXP SEMICONDUCTORS AT ANY TIME.

Any use of the data provided hereunder is at your own risk.

IN NO EVENT SHALL NXP SEMICONDUCTORS, BE LIABLE FOR ANY DIRECT, SPECIAL, INDIRECT, CONSEQUENTIAL, PUNITIVE, OR INCIDENTAL DAMAGES (INCLUDING WITHOUT LIMITATION DAMAGES FOR LOSS OF BUSINESS, BUSINESS INTERRUPTION, LOSS OF USE, LOSS OF DATA OR INFORMATION, AND THE LIKE) ARISING OUT OF THE USE OF THE DATA, WHETHER OR NOT BASED ON TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY, BREACH OF CONTRACT, BREACH OF WARRANTY OR ANY OTHER THEORY, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOTWITHSTANDING ANY DAMAGES THAT YOU MIGHT INCUR FOR ANY REASON WHATSOEVER (INCLUDING, WITHOUT LIMITATION, ALL DAMAGES REFERENCED ABOVE AND ALL GENERAL DAMAGES), THE ENTIRE LIABILITY OF NXP SEMICONDUCTORS, AND YOUR EXCLUSIVE REMEDY FOR ALL OF THE FOREGOING SHALL BE LIMITED TO ACTUAL DAMAGES INCURRED BY YOU BASED ON REASONABLE RELIANCE UP TO ONE DOLLARS (US$1.00). THE FOREGOING LIMITATIONS, EXCLUSIONS AND DISCLAIMERS SHALL APPLY TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, EVEN IF ANY REMEDY FAILS OF ITS ESSENTIAL PURPOSE.

Your use of this data, and all consequences of such use, is solely your responsibility. You must perform sufficient engineering and additional qualification testing in order to properly evaluate your application and determine whether a candidate NXP Semiconductors device is suitable for use in that application.

NXP Semiconductors' products are specifically designed and manufactured to be used within the electrical, thermal, mechanical and other parameters set forth in NXP Semiconductors' data sheets. Quality and reliability data provided by NXP Semiconductors, such as MTBF, MSL and FIT, is intended to be a non-binding estimate of product performance based upon diffusion process, history only. It does not imply that any performance levels reflected in such data can be met if the product is operated outside the conditions expressly stated in the latest published data sheet for a device or in your application.

The RoHS data provided hereunder is preliminary and non binding for NXP Semiconductors. NXP Semiconductors does not accept any liability related to this data.

NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage nor for any other use that is not explicitly agreed between the parties. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk.

Any use of NXP Semiconductors' products beyond the scope defined in the current NXP Semiconductors' data sheet voids all warranty responsibility of NXP Semiconductors with respect to such devices, and also voids all responsibility of NXP Semiconductors with respect to any applications assistance, product design, software performance or services of any kind that were or may have been performed in connection with the sale of any such devices.

Further, resale of NXP Semiconductors' products or services with statements different from or beyond the parameters stated by NXP Semiconductors for that product in official NXP Semiconductors data sheets, or without the warnings or instructions provided by NXP Semiconductors, voids all express and any implied warranties for the associated NXP Semiconductors product or service, and is an unfair and deceptive business practice.

Documentation for this product

TypeFormatTitleDate
Data sheetpdfGreenChip drivers for LED lighting (v.4.0)2012-05-08
Application notepdfBuck converter for SSL applications (v.2.0)2011-06-23
Application notepdfSMPS EMC and layout guidlines (v.1.0)2011-02-18
Application notepdfSSL2108X driver for SSL applications (v.1.2)2011-07-01
Application notepdfBuck converter driver for SSL applications (v.1.0)2012-05-10
BrochurepdfNXP GreenChip iCFL and GreenChip iSSL smart lighting solutions (v.3.0)2012-01-09
BrochurepdfLED Lighting Solutions Quick Start Guide With NXP Driver ICs (v.1.0)2012-01-12
LeafletpdfNXP buck controllers SSL2108x / SSL2109 (v.3.1)2012-05-02
LogogifGreenChip logo (v.1.0)2012-04-20
Reportpdf2293 Smart lighting backgrounder (v.1.0)2011-05-13
User manualpdfSSL21083 reference board user manual (v.2.0)2011-11-16
User manualpdfSSL2108X buck evaluation board (v.1.0)2011-10-04
User manualpdfSSL2109 reference board (v.1.1)2012-04-19

Ordering & availability

Type numberOrdering code(12NC)Orderable part numberRegionDistributorIn stockOrder quantityInventory dateBuy onlineSamples
SSL21083T/19352 960 84118SSL21083T/1,118NAFUTURE ELECTRONICS2,5005/23/2012Buy online 
   EUFUTURE ELECTRONICS UK2,5005/23/2012Buy online 
   ASIAFUTURE ELECTRONICS- ASIA2,5005/23/2012Buy online 
   EUARROW EUROPE2,5005/23/2012Buy online 
   ASIASACL - Hong Kong/Chinayes250005/01/2012Buy online 

Sample

Sample orders normally take 2-4 days for delivery.
If you do not have a direct account with NXP our network of global and regional distributors is available and equipped to support you with NXP samples. As a NXP customer you also have the option to order samples via our sales organisation.

Demo boards

SSL21083DB01
SSL21083DB01

SSL21083 6 W Buck reference board

Technical support

Do you want to ask technical questions to an NXP expert?
Please select one of the following options:

How to search?

Restricted Document

You are accessing a password protected document.
Please choose an option below

Fill in your name, company and e-mail address and you will receive an e-mail with a username and password for this restricted document.

First name*

Last name*

Company*

E-mail*

Comments

* required.

Print password request form:

Before we can grant you access to our confidential documents you are required to fill in, print and sign the password request form by which you comply with the NXP Non-disclosure agreement (NDA). Please email or fax the signed form to the email-address or fax-number specified on the form. After approval you will receive username and password via email. In case you already signed an NDA with NXP and already have username and password, you can skip this step.

Open document:

If you have received the username and password, you can open the document by clicking on the "open document" link. You will be prompted for username and password. After you fill in the username and password the download will start.

Forgot your password:

In case you forgot your password you can click on the "forgot your password" link to retrieve your password. Please complete the small form with your personal details and your request will be sent to NXP. You will receive an answer with your password shortly.

Request secure documentation

Fill in your name, company and e-mail address and you will receive an e-mail with a username and password for this secure document.

First name*

Last name*

Company*

E-mail*

Comments

* required.

Datasheet confidential

Fill in your details and you will be contacted

First name*

Last name*

Company*

Country*

Telephone number*

E-mail*

* required.

Your e-mail address will only be used to send the datasheet and will not be used for any other purposes.

No datasheet available

Fill in your details to receive notification when the datasheet becomes available

First name*

Last name*

Company*

E-mail*

* required.

Your email address will only be used to send the datasheet and will not be used for any other purposes.