For best experience this site requires Javascript to be enabled. To enable on your browser, follow our accessibility instructions.

S32K3 Motor Control Training

About This Training

This webinar will explain motor control solutions powered by NXP S32K3 MCU and the new motor control kit. We will showcase how to build and tune motor control applications using our different software tools such as the Automotive Math and Motor Control Library (AMMCLib) and Real-Time Drivers (RTD).

The initial part is focused on S32K3 alignment to current-trend motor control techniques and typical applications followed by an introduction to the S32K3 motor control digital loop and Field Oriented Control (FOC). The second part consists of a demonstration of software solutions with S32K3 motor control kit.

Presentation

S32K3 Motor Control Training

What You Will Learn

Key market trends in automotive motor control
S32K3 motor control applications and techniques alignment
Implementation of the digital control loop based on S32K3 peripherals
Principle of Field Oriented Control (FOC) loop
Main features of the new S32K344 Brushless Direct Current and Permanent Magnet Synchronous Motor Control Development Kit
NXP´s motor control software and hardware installation steps
How to use both configurations tools S32CT and EB Tresos Studio for AUTOSAR compliant applications
Building and uploading software into the S32K3 motor control kit

Presented by

Radek Sestak

Software Engineer, NXP Semiconductor
Tomas Fedor

Software Engineer, NXP Semiconductor

DURATION

48 min

LANGUAGE

English

SKILL LEVEL

Beginner

0Views0Likes

We are looking for ways to improve.

Take the survey.

Additional Resources

Related Trainings

Upgrade Your Motor Control Application with Scalable and Secure MCUs (S32K1 Motor Control Solutions)

Stay In the Loop

Subscribe to our newsletter to stay updated with our latest developments and if you need further assistance, we are here to help.

Subscribe Contact Support