Design Files
Receive the full breakdown. See the product footprint and more in the eCad file.
- No Longer Manufactured
- PCA8539DUG
100 X 18 Chip-on-Glass Automotive LCD Dot Matrix Driver
- This page contains information on a product that is no longer manufactured (discontinued). Specifications and information herein are available for historical reference only.
The PCA8539 is a fully featured Liquid Crystal Display (LCD) driver, specifically designed for high-contrast Vertical Alignment (VA) LCD with multiplex rates up to 1:18. It generates the drive signals for multiplexed LCD containing up to 18 backplanes, 100 segments, and up to 1800 elements. The PCA8539 features an internal charge pump with internal capacitors for on-chip generation of the LCD driving voltage. To ensure an optimal and stable contrast over the full temperature range, the PCA8539 offers a programmable temperature compensation of the LCD supply voltage. The PCA8539 can be easily connected to a microcontroller by either the two-line I²C-bus or a four-line bidirectional SPI-bus.
Product Details
Features
Key Features
- AEC Q100 grade 2 compliant for automotive applications
- Single-chip LCD controller and driver
- Extended operating temperature range from -40 °C to +105 °C
- 100 segments and 18 backplanes allowing to drive any graphic with up to 1800 elements
- Readout of RAM and registers is possible
- Diagnostic features: Checksum on I²C and SPI bus
- Frame frequency: programmable from 45 Hz to 360 Hz
- 2960-bit RAM for storage (1800 bit for display data)
- Two-line I²C-bus interface or four-line SPI bus
- Multiplex drive mode 1:18 and 1:12
- Large supply voltage range: VDD1: 2.5 V to 5.5 V (chip can be driven with battery cells)
- Analog supply voltage VDD2: 2.5 V to 5.5 V
- LCD supply voltage VLCD: 4 V to 16 V
- Very low current consumption (20 μA to 200 μA): Power-down mode: < 2 μA
On-Chip
- Configurable 4, 3, or 2 times voltage multiplier generating LCD supply voltage, independent of VDD, programmable by instruction (external supply also possible)
- Integrated temperature sensor with temperature readout
- Temperature compensation of on-chip generated VLCDOUT. Selectable linear temperature compensation of VLCD
- Generation of intermediate LCD bias voltages
- Oscillator requires no external components (external clock also possible)
Inversion Modes
- n-line (n = 1 to 7) inversion
- Frame inversion
Buy/Parametrics
|
|
|
|
|
|
|
|---|---|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
