Divide ratio control input SW selects the
required divide ratio of ÷64 or ÷128.
2.8 GHz Toggle Frequency
On-Chip output termination provides 2.5mA of
output current to drive a 12pF (typical) high impedance load.
The output voltage swing under typical supply voltage and
temperature conditions is 1.2V. If additional drive is required
for the prescaler output, an external resistor can be added in
parallel from the OUT pin to GND to increase the output power.
Care must be taken not to exceed the maximum allowable current
through the output.
Supply Voltage 4.5 to 5.5V
Low Power Dissipation 51 mW Typical
Operating Temperature Range of -40 to 85°C