Design Files
Quick reference to our
design files types.
1 design file
-
Printed Circuit Boards and Schematics
ADAM QFN 6x6 PCB DXF file
- No Longer Manufactured
- MMDS09254H
700-1000 MHz Advanced Doherty Alignment Module
- This page contains information on a product that is no longer manufactured (discontinued). Specifications and information herein are available for historical reference only.
The MMDS09254H is an integrated module designed for use in base station transmitters in conjunction with high power Doherty amplifiers. The device is designed to enable accurate alignment of phase and amplitude on the carrier and peaking amplifiers to ensure performance consistency, in particular for asymmetric implementations. The MMDS09254H enables superior linearity-efficiency trade-off while improving output power. It contains a 90° coupler, digitally selectable phase shifters and step attenuators, and operates from a single voltage supply. The MMDS09254H is suitable for transmit protocols such as GSM, W-CDMA, UMTS and LTE using frequencies from 700 to 1000 MHz, and is controlled using a serial peripheral interface (SPI).
QFN 6 x 6, 32-Lead Package Image
Product Details
Block Diagram
Features
Key Features
- Frequency: 700-1000 MHz
- Maximum RF Input Power: 25 dBm (CW)
- Low Loss Power Splitter
- 0.5 dB Step Programmable Attenuators with 7.5 dB Maximum Range
- 7° per Bit Phase Shifters with 49° Maximum Range
- Power up into a Selectable State
- Single 5 Volt Supply
- Supply Current: 12 mA
- 50 Ohm Operation (no external matching required)
- TTL/CMOS/SPI Interface (1.8 V, 3.3 V Logic)
- Cost-effective 32-pin, 6 mm QFN Surface Mount Plastic Package
- RoHS compliant
- In Tape and Reel. T1 Suffix = 1000 Units, 16 mm Tape Width, 7-inch Reel
Part numbers include: MMDS09254H.
Buy/Parametrics
|
|
|
|
|
|
|
|---|---|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Documentation
Quick reference to our documentation types.