NX3V1G384GM: Low-ohmic single-pole single-throw analog switch ARCHIVED

Overview

Archived content is no longer updated and is made available for historical reference only.

The NX3V1G384 is a low-ohmic single-pole single-throw analog switch. It has two input/output terminals (Y and Z) and an active LOW enable input pin (E). When pin E is HIGH, the analog switch is turned off.

Schmitt trigger action at the enable input (E) makes the circuit tolerant to slower input rise and fall times. The NX3V1G384 allows signals with amplitude up to V_CC to be transmitted from Y to Z or from Z to Y. Its ultra-low ON resistance (0.3 Ω) and flatness (0.1 Ω) ensures minimal attenuation and distortion of transmitted signals.

MoreLess

Features

Wide supply voltage range from 1.4 V to 4.3 V
Very low ON resistance (peak):
- 0.8 Ω (typical) at V_CC = 1.4 V
- 0.5 Ω (typical) at V_CC = 1.65 V
- 0.3 Ω (typical) at V_CC = 2.3 V
- 0.25 Ω (typical) at V_CC = 2.7 V
- 0.25 Ω (typical) at V_CC = 4.3 V
High noise immunity
ESD protection:
- HBM JESD22-A114F Class 3A exceeds 7500 V
- MM JESD22-A115-A exceeds 200 V
- CDM AEC-Q100-011 revision B exceeds 1000 V
- IEC61000-4-2 contact discharge exceeds 6000 V for switch ports
CMOS low-power consumption
Latch-up performance exceeds 100 mA per JESD78B Class II Level A
Direct interface with TTL levels at 3.0 V
Control input accepts voltages above supply voltage
High current handling capability (500 mA continuous current under 3.3 V supply)
Specified from -40 °C to +85 °C and from -40 °C to +125 °C

MoreLess

Features

Wide supply voltage range from 1.4 V to 4.3 V
Very low ON resistance (peak):
- 0.8 Ω (typical) at V_CC = 1.4 V
- 0.5 Ω (typical) at V_CC = 1.65 V
- 0.3 Ω (typical) at V_CC = 2.3 V
- 0.25 Ω (typical) at V_CC = 2.7 V
- 0.25 Ω (typical) at V_CC = 4.3 V
High noise immunity
ESD protection:
- HBM JESD22-A114F Class 3A exceeds 7500 V
- MM JESD22-A115-A exceeds 200 V
- CDM AEC-Q100-011 revision B exceeds 1000 V
- IEC61000-4-2 contact discharge exceeds 6000 V for switch ports
CMOS low-power consumption
Latch-up performance exceeds 100 mA per JESD78B Class II Level A
Direct interface with TTL levels at 3.0 V
Control input accepts voltages above supply voltage
High current handling capability (500 mA continuous current under 3.3 V supply)
Specified from -40 °C to +85 °C and from -40 °C to +125 °C

Data Sheets

Application Notes

Outline 3d SOT886

Outline 3d SOT886

Outline 3d SOT886

Previous Next