NX3L2T66 | NXP Semiconductors

Overview

The NX3L2T66 is a dual low-ohmic single-pole single-throw analog switch. Each switch has two input/output terminals (nY and nZ) and an active HIGH enable input (nE). When pin nE is LOW, the analog switch is turned off.

Schmitt trigger action at the enable input (nE) makes the circuit tolerant to slower input rise and fall times. A low input voltage threshold allows pin nE to be driven by lower level logic signals without a significant increase in supply current I_CC. This makes it possible for the NX3L2T66 to switch 4.3 V signals with a 1.8 V digital controller, eliminating the need for logic level translation.

The NX3L2T66 allows signals with amplitude up to V_CC to be transmitted from nY to nZ; or from nZ to nY. Its low ON resistance (0.5 Ω) and flatness (0.13 Ω) ensures minimal attenuation and distortion of transmitted signals.

MoreLess

Features

Wide supply voltage range from 1.4 V to 4.3 V
Very low ON resistance (peak):
- 1.6 Ω (typical) at V_CC = 1.4 V
- 1.0 Ω (typical) at V_CC = 1.65 V
- 0.55 Ω (typical) at V_CC = 2.3 V
- 0.50 Ω (typical) at V_CC = 2.7 V
- 0.50 Ω (typical) at V_CC = 4.3 V
High noise immunity
ESD protection:
- HBM JESD22-A114F Class 3A exceeds 7500 V
- MM JESD22-A115-A exceeds 200 V
- CDM AEC-Q100-011 revision B exceeds 1000 V
- IEC61000-4-2 contact discharge exceeds 4000 V for switch ports
CMOS low-power consumption
Latch-up performance exceeds 100 mA per JESD 78 Class II Level A
1.8 V control logic at V_CC = 3.6 V
Control input accepts voltages above supply voltage
Very low supply current, even when input is below V_CC
High current handling capability (350 mA continuous current under 3.3 V supply)
Specified from -40 °C to +85 °C and from -40 °C to +125 °C

Target Applications

Cell phone
PDA
Portable media player

MoreLess

Features

Wide supply voltage range from 1.4 V to 4.3 V
Very low ON resistance (peak):
- 1.6 Ω (typical) at V_CC = 1.4 V
- 1.0 Ω (typical) at V_CC = 1.65 V
- 0.55 Ω (typical) at V_CC = 2.3 V
- 0.50 Ω (typical) at V_CC = 2.7 V
- 0.50 Ω (typical) at V_CC = 4.3 V
High noise immunity
ESD protection:
- HBM JESD22-A114F Class 3A exceeds 7500 V
- MM JESD22-A115-A exceeds 200 V
- CDM AEC-Q100-011 revision B exceeds 1000 V
- IEC61000-4-2 contact discharge exceeds 4000 V for switch ports
CMOS low-power consumption
Latch-up performance exceeds 100 mA per JESD 78 Class II Level A
1.8 V control logic at V_CC = 3.6 V
Control input accepts voltages above supply voltage
Very low supply current, even when input is below V_CC
High current handling capability (350 mA continuous current under 3.3 V supply)
Specified from -40 °C to +85 °C and from -40 °C to +125 °C

Target Applications

Cell phone
PDA
Portable media player

Previous Next

NX3L2T66: Dual Low-Ohmic Single-Pole Single-Throw Analog Switch

Overview

Features

Target Applications

Features

Target Applications