Peripherals and Logic
Signal Chain
Analog Switches
- NX3DV221GM
- NX3DV221TK
- NX3DV2567
- NX3DV3899
- NX3DV42
- NX3DV642GU
- NX3L1G3157
- NX3L1G384
- NX3L1G53
- NX3L1G66
- NX3L1T3157
- NX3L1T384
- NX3L1T5157
- NX3L1T53
- NX3L2267
- NX3L2467
- NX3L2G384
- NX3L2G66
- NX3L2T66
- NX3L4051
- NX3L4053
- NX3L4357
- NX3L4684
- NX3V1G384
- NX3V1G66
- NX5DV330
- NX5DV715HF
- NX5L2750CGU
NX3L4684

NX3L4684: Low-ohmic dual single-pole double-throw analog switch

Overview

The NX3L4684 is a dual low-ohmic single-pole double-throw analog switch, suitable for use as an analog or digital multiplexer/demultiplexer. Each switch has a digital select input (nS), two independent inputs/outputs (nY0 and nY1) and a common input/output (nZ).

Schmitt trigger action at the digital inputs makes the circuit tolerant to slower input rise and fall times. Low threshold digital inputs allows this device to be driven by 1.8 V logic levels in 3.3 V applications without significant increase in supply current I_CC. This makes it possible for the NX3L4684 to switch 4.3 V signals with a 1.8 V digital controller, eliminating the need for logic level translation. The NX3L4684 allows signals with amplitude up to V_CC to be transmitted from nZ to nY0 or nY1; or from nY0 or nY1 to nZ. Its low ON resistance (0.3 Ω for Y0 port, 0.5 Ω for Y1 port) and flatness (0.1 Ω) ensures minimal attenuation and distortion of transmitted signals.

MoreLess

Features

Wide supply voltage range from 1.4 V to 4.3 V
Very low ON resistance (peak) for Y0 port:
- 0.8 Ω (typical) at V_CC = 1.4 V
- 0.5 Ω (typical) at V_CC = 1.65 V
- 0.3 Ω (typical) at V_CC = 2.3 V
- 0.25 Ω (typical) at V_CC = 2.7 V
- 0.25 Ω (typical) at V_CC = 4.3 V
Break-before-make switching
High noise immunity
ESD protection:
- HBM JESD22-A114F Class 3A exceeds 4000 V
- MM JESD22-A115-A exceeds 200 V
- CDM AEC-Q100-011 revision B exceeds 1000 V
- IEC61000-4-2 contact discharge exceeds 6000 V for switch ports
CMOS low-power consumption
Latch-up performance exceeds 100 mA per JESD 78B Class II Level A
1.8 V control logic at V_CC = 3.6 V
Control input accepts voltages above supply voltage
Very low supply current, even when input is below V_CC
High current handling capability (350 mA continuous current under 3.3 V supply)
Specified from – 40 °C to +85 °C and from – 40 °C to +125 °C

Target Applications

Cell phone
PDA
Portable media player

MoreLess

Features

Wide supply voltage range from 1.4 V to 4.3 V
Very low ON resistance (peak) for Y0 port:
- 0.8 Ω (typical) at V_CC = 1.4 V
- 0.5 Ω (typical) at V_CC = 1.65 V
- 0.3 Ω (typical) at V_CC = 2.3 V
- 0.25 Ω (typical) at V_CC = 2.7 V
- 0.25 Ω (typical) at V_CC = 4.3 V
Break-before-make switching
High noise immunity
ESD protection:
- HBM JESD22-A114F Class 3A exceeds 4000 V
- MM JESD22-A115-A exceeds 200 V
- CDM AEC-Q100-011 revision B exceeds 1000 V
- IEC61000-4-2 contact discharge exceeds 6000 V for switch ports
CMOS low-power consumption
Latch-up performance exceeds 100 mA per JESD 78B Class II Level A
1.8 V control logic at V_CC = 3.6 V
Control input accepts voltages above supply voltage
Very low supply current, even when input is below V_CC
High current handling capability (350 mA continuous current under 3.3 V supply)
Specified from – 40 °C to +85 °C and from – 40 °C to +125 °C

Target Applications

Cell phone
PDA
Portable media player

Data Sheets

Application Notes

Sample

Previous Next