The NX5P3201 is an advanced dual power switch consisting of two independent switches.
They are, an advanced 3 A bidirectional power switch (SWP) for USB OTG and charger port
applications, and a high-side 6 A load switch (SW5).
SWP includes an open-drain status indicator. It also consists of OverTemperature
Protection (OTP), UnderVoltage LockOut (UVLO) and OverVoltage LockOut (OVLO) protection
circuits. The OVLO circuit isolates the pin VBUS when more than 6.55 V is applied to pin
VBUS via the USB connector. To prevent unnecessary switching due to ringing on pins VBUS
or PMU, the UVLO circuits include a 15 ms turn-on delay. This deglitch function allows
the applied voltage to stabilize above VUVLO before closing SWP.
SW5 consists of OTP, Reverse Current Protection (RCP), and UVLO protection circuits. The
UVLO isolates VBAT from VIN until VI exceeds VUVLO. If the voltage
at VBAT exceeds VI by 30 mV, the RCP circuit isolates VBAT from VIN. It
prevents damage to devices on the input side of the switch.
Both switches include slew rate controlled inrush current reduction to prevent damage
when switching high capacitive loads.