36XSD | 36 V Industrial low RDSON eXtreme Switch

Overview

The NXP^® 36XSD is part of a family of intelligent, dual high side eXtreme switches for 36 V systems. This family offers devices with current capability from one to 12 A DC that are fully compatible in footprint and software within the PQFN subfamily.

Each output can be programmed for any kind of loads, including lamps, LEDs, motors or solenoids, which allows you to design a flexible module that can become specific and optimized for a given application through software
Provides robust design, intelligence and safety needed for industrial applications up to 36 V supply voltage
With increased integration, the switch drives lightweight, smaller systems and a lower component count
Easy Tower^® System eXtreme Switch module configuration

Features

Up to 12 A steady-state current per channel
Separate bulb and DC motor latched over-current handling
Sleep mode with minimal supply current (< 10 µA @ 24 V)
Individually programmable internal/external PWM clock signals
Overcurrent, short-circuit, and overtemperature protection with programmable auto-retry functions
Accurate temperature and current sensing
Open-load detection (channel in OFF and ON state), also for LED applications (7.0 mA typ.)
Normal operating range: 8.0 - 36 V, extended range: 6.0 - 58 V
3.3 V and 5.0 V compatible 16-bit SPI port for device control, configuration, and diagnostics at rates up to 8.0 MHz
Compatible PCB footprint and SPI software driver among the family
These products are included in our product longevity program with assured supply for a minimum of 15 years after launch

Features

Up to 12 A steady-state current per channel
Separate bulb and DC motor latched over-current handling
Sleep mode with minimal supply current (< 10 µA @ 24 V)
Individually programmable internal/external PWM clock signals
Overcurrent, short-circuit, and overtemperature protection with programmable auto-retry functions
Accurate temperature and current sensing
Open-load detection (channel in OFF and ON state), also for LED applications (7.0 mA typ.)
Normal operating range: 8.0 - 36 V, extended range: 6.0 - 58 V
3.3 V and 5.0 V compatible 16-bit SPI port for device control, configuration, and diagnostics at rates up to 8.0 MHz
Compatible PCB footprint and SPI software driver among the family
These products are included in our product longevity program with assured supply for a minimum of 15 years after launch