Name: Entrylevel 32bit Microcontroller MCU based on Arm CortexM3 Core
Availability: BackOrder

For best experience this site requires Javascript to be enabled. To enable on your browser, follow our accessibility instructions.

The LPC1313FBD48 is an Arm Cortex-M3-based microcontroller for embedded applications featuring a high level of integration and low power consumption. The LPC1313FBD48 operates at CPU frequencies of up to 72 MHz. The peripheral complement of the LPC1313FBD48 includes up to 32 kB of flash memory, up to 8 kB of data memory, one Fast-mode plus (Fm+) I2C interface, one UART, four general purpose timers, and up to 42 general purpose I/O pins.

See product image

Data Sheet

Application Notes

Product Details

Features

Arm Cortex-M3 processor, running at frequencies of up to 72 MHz
Arm Cortex-M3 built-in Nested Vectored Interrupt Controller (NVIC)
32 kB on-chip flash programming memory
8 kB SRAM
In-System Programming (ISP) and In-Application Programming (IAP)
UART with fractional baud rate generation
SSP controller with FIFO and multi-protocol capabilities
I2C-bus interface supporting full I2C-bus specification and Fast-mode Plus
Up to 42 General Purpose I/O (GPIO) pins
Four general purpose counter/timers
Programmable WatchDog Timer (WDT)
System tick timer
Serial Wire Debug and Serial Wire Trace port
High-current output driver (20 mA) on one pin
High-current sink drivers (20 mA) on two I2C-bus pins in Fast-mode Plus
Integrated PMU (Power Management Unit)
Three reduced power modes: Sleep, Deep-sleep, and Deep power-down
Single power supply (2.0 V to 3.6 V)
10-bit ADC with input multiplexing among 8 pins
GPIO pins can be used as edge and level sensitive interrupt sources
Clock output function with divider
Processor wake-up from Deep-sleep mode via a dedicated start logic
Brownout detect with four separate thresholds
Power-On Reset (POR)
Integrated oscillator with an operating range of 1 MHz to 25 MHz
12 MHz internal RC oscillator trimmed to 1 % accuracy
Programmable watchdog oscillator with a frequency range of 7.8 kHz to 1.8 MHz
System PLL allows CPU operation up to the maximum CPU rate
Code Read Protection (CRP) with different security levels
Individual device serial number for identification

Target Applications

eMetering
Lighting
Alarm systems
White goods

Buy/Parametrics

‌ ‌ ‌	‌ ‌	‌ ‌	‌ ‌	‌ ‌	‌ ‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌

Design Resources

Design Files

Quick reference to our design files types.

4 design files

Receive the full breakdown. See the product footprint and more in the eCad file.

Models
IBIS models for LPC13xx pkg LQFP-48

ZIPRev 1Jun 13, 2017 16:19:0082.24 KBIBIS_LPC13xx_LQFP-48
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue
Models
IBIS models for LPC13xx

ZIPRev 1Jun 13, 2017 16:19:0082.18 KBIBIS_LPC13xx
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue
Symbols and Footprints
LPC13xx ORCAD symbols

ZIPRev 0Jun 3, 2016 00:00:002.80 KBLPC13XX-ORCAD-SYM

Account Required
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue
Symbols and Footprints
LPC13xx Eagle symbols

ZIPRev 0Jun 3, 2016 00:00:005.19 KBLPC13XX-EAGLE-SYM

Account Required
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue

Hardware

Quick reference to our board types.

4 hardware offerings

Emulators, Probes, and Programmers
Universal Multilink Development Interface
Active

UMultilink
Emulators, Probes, and Programmers
PEmicro Cyclone FX programmer

CYCLONE-FX
Emulators, Probes, and Programmers
Universal Multilink FX High-Speed Development Interface
Active

U-MULTILINK-FX
Additional hardware available. View our featured partner solutions.
Emulators, Probes, and Programmers
PEmicro Cyclone programmer
Active

CYCLONE

1-5 of 25 hardware offerings

Emulators, Probes, and Programmers
J-Link PLUS

JTAG/SWD debug probe with USB interface. Based on a 32-bit RISC CPU, it can communicate at high speed with the supported target CPUs. J-Link is used around the world in t...

By SEGGER Microcontroller GmbH Gold Partner
Emulators, Probes, and Programmers
Universal Access Device 3+ (UAD3+)

The UAD3+, equipped with up to 4 GB of trace memory and powerful interfaces to target and host, is the right solution for trace, multicore debugging, profiling and code c...

By PLS Development Tools Gold Partner
Emulators, Probes, and Programmers
J-Link BASE

Supercharge your IDE with the worlds fastest debug probe. The J-Link Flash download technology achieves a performance very close to the maximum speed possible. No other ...

By SEGGER Microcontroller GmbH Gold Partner
Emulators, Probes, and Programmers
Flasher Compact

Flasher Compact is the compact twin to the Flasher PRO, primarily designed for installation into production rigs or automated test equipment (ATE) where production space ...

By SEGGER Microcontroller GmbH Gold Partner
Emulators, Probes, and Programmers
Flasher Hub-4

SEGGER’s Flasher Hub-4 controls multiple Flasher Compacts (up to 24 via USB hubs) serving as individual channels for parallel, high-speed gang programming. Each channel c...

By SEGGER Microcontroller GmbH Gold Partner
Emulators, Probes, and Programmers
Flasher ARM

In-Circuit-Flash-Programmer based on the J-Link family for production and in-field-service. Offers fastest flash algorithms available, multiple integration options (RS232...

By SEGGER Microcontroller GmbH Gold Partner
Emulators, Probes, and Programmers
Flasher Hub-12

The Flasher Hub-12 controls up to 12 Flasher Compacts so that they program simultaneously, creating a powerful gang programmer for efficient high-speed parallel programmi...

By SEGGER Microcontroller GmbH Gold Partner
Emulators, Probes, and Programmers
J-Link PRO PoE

J-Link PRO PoE is a specialized programming / debug probe for creating test farms. It can draw power via Ethernet and supplies power to the target either via debug interf...

By SEGGER Microcontroller GmbH Gold Partner
Emulators, Probes, and Programmers
J-Link PRO

J-Link PRO is an enhanced version of the SEGGER J-Link. This emulator supports ARM/Cortex devices. This has an Ethernet interface in addition to the USB interface. This ...

By SEGGER Microcontroller GmbH Gold Partner
Emulators, Probes, and Programmers
Flasher ATE2

Flasher ATE2 is a robust single-board gang programmer with eight independent programming channels. It is designed for high-volume, automated production environments, part...

By SEGGER Microcontroller GmbH Gold Partner
Emulators, Probes, and Programmers
Universal Access Device 2next (UAD2next

The UAD2next combines the state-of-the-art debugging features and CAN with trace capabilities. It can be extended by plugin trace modules supporting e.g. ARM CoreSight pa...

By PLS Development Tools Gold Partner
Emulators, Probes, and Programmers
Flasher Secure

Flasher Secure is a mass production programming system, capable of protecting the vendor’s IP regardless of the production site. It provides full control over the program...

By SEGGER Microcontroller GmbH Gold Partner
Emulators, Probes, and Programmers
J-Trace PRO Cortex-M

J-Trace PRO for Cortex-M enables continuous streaming trace, lifting the limitations by internal buffers and slow data transmission to give the insights you need to optim...

By SEGGER Microcontroller GmbH Gold Partner
Emulators, Probes, and Programmers
J-Link ULTRA+

The J-Link ULTRA+ is three times faster than the industry standard J-Link, at a 3 MBytes/s download speed to RAM. It comes complete with J-Flash, and Unlimited Flash Brea...

By SEGGER Microcontroller GmbH Gold Partner
Emulators, Probes, and Programmers
Flasher Portable PLUS

Flasher Portable PLUS is an extremely portable flash programmer, specifically designed to meet the needs of production-grade flash programming in the field.

By SEGGER Microcontroller GmbH Gold Partner
Emulators, Probes, and Programmers
J-Trace PRO Cortex

J-Trace PRO Cortex provides support for Cortex-A/R/M based microcontrollers. The SuperSpeed USB 3.0 interface enables continuous streaming trace via USB with the full tra...

By SEGGER Microcontroller GmbH Gold Partner
Emulators, Probes, and Programmers
J-Link WiFi

JTAG/SWD debug probe with WiFi interface. Based on a 32-bit RISC CPU, it can communicate at high speed with the supported target CPUs.

By SEGGER Microcontroller GmbH Gold Partner
Emulators, Probes, and Programmers
J-Link EDU Mini

The J-Link EDU Mini is a stripped-down, budget-friendly model of the J-Link debug probe created for educational use. Even with its reduced size, it maintains most J-Link ...

By SEGGER Microcontroller GmbH Gold Partner
Emulators, Probes, and Programmers
Flasher PRO

Flasher PRO is SEGGER’s “almost-anything” flash programmer for microcontrollers, SoCs, and (Q)SPI flashes.

By SEGGER Microcontroller GmbH Gold Partner
Emulators, Probes, and Programmers
Universal Access Device 2pro (UAD2pro)

The UAD2pro offers fast and flexible communication between UDE® Universal Debug Engine on the Host PC and the microcontroller target. Host interface is USB. Target interf...

By PLS Development Tools Gold Partner
Test Accessories and Debugger
Cyclone Production Programmers

Programmer for stand-alone (or cloud-connected) in-circuit flash programming, debug, & test of many NXP MCUs. Sophisticated power mgmt & dynamic data. FX line off...

By P & E Microcomputer Systems, Inc Gold Partner
Test Accessories and Debugger
TRACE32® CombiProbe 2 Compact Trace for NXP Microcontrollers

CombiProbe 2 enables full insight into what an embedded system is doing at run-time. Besides its comprehensive debug capabilities, the trace simplifies system profiling o...

By Lauterbach GmbH Gold Partner
Test Accessories and Debugger
Multilink Debug Probes

Multilink debug probes are BDM/JTAG debug probes for various NXP devices. Universal models support SWO debug in NXP's MCUXpresso IDE. FX model features high-speed com...

By P & E Microcomputer Systems, Inc Gold Partner
Test Accessories and Debugger
TRACE32® Debug and Trace tools for Arm®-based NXP MPUs/MCUs

TRACE32® provides a complete suite of tools for all NXP&#39;s Arm®-based microprocessors. All of these provide unparalleled levels of debug capabilities to get th...

By Lauterbach GmbH Gold Partner
Test Accessories and Debugger
TRACE32® PowerDebug System for NXP Microcontrollers/Microprocessors

PowerDebug is Lauterbach&amp;#39;s powerful, modular, flexible debug system. It provides the broadest coverage of supported chips and core architectures in the em...

By Lauterbach GmbH Gold Partner