For best experience this site requires Javascript to be enabled. To enable on your browser, follow our accessibility instructions.

Electricity Grid and Distribution

Overview

Electricity grid, electrical grid or power grid is the network comprised by the generators, transmission lines, transformers, substation and distribution lines that deliver power to the consumer. Concentrators are important part of the metering system in a state grid which collect power consumption information downward from power meters and collectors.

NXP offers the different products need to build and connect a concentrator such as support for various communication protocols including RS-485, 470MHz Sub-G wireless system, Power Line Carrier (PLC-Broadband and narrowband carrier), Ethernet, 2G/3G/4G, and State Grid VPN.

MoreLess

Specifications

Choose a diagram

Power Grid Concentrator

Power Grid Concentrator

MCU

i.MX6ULL : i.MX 6ULL Single-Core Processor with Arm^® Cortex^®-A7 Core
KM3x : 50–75 MHz Precision Metrology MCUs with Segment LCDs based on Arm^® Cortex^®-M0+

Transceiver

SC16C650B : 5 V, 3.3 V and 2.5 V UART with 32-byte FIFOs and infrared (IrDA) encoder/decoder
TJA1101/TJA1101B: Robust, Low Power 100BASE-T1 PHY Transceiver

Power Management

PF3001 : 10-Channel Configurable PMIC for i.MX6 and i.MX7 Application Processors

RTC

PCF2129 : Accurate RTC with Battery Backup – Selectable I²C-Bus or SPI

Security (EdgeLock Discrete)

EdgeLock^® SE050: Plug & Trust Secure Element Family – Enhanced IoT security with maximum flexibility