3-Phase Reference Design for Fuji M653 IGBTs Featuring GD3100

RDGD3100F3PH5EVB

Roll over image to zoom in

Product Details

Block Diagram

RDGD3100F3PH5EVB

RDGD3100F3PH5EVB Block Diagram

Supported Devices

Processors and Microcontrollers

Ultra-Reliable MPC57xx MCUs

Power Management

System Basis Chips

Powertrain and Engine Control

Interfaces

3.3 V / 5 V IO CAN Transceivers

Features

  • MC33GD3100
    • Advanced single channel gate driver for IGBT and SiC MOSFETs. Integrated galvanic isolation and low on-resistance drive transistors provide high charging and discharging current, low dynamic saturation voltage and rail-to-rail gate voltage control
  • Key Features
    • SPI interface for safety monitoring, programmability and flexibility
    • Low propagation delay and minimal PWM distortion
    • Integrated galvanic signal isolation (up to 8 kV)
    • Integrated gate drive power stage capable of 15 A peak source and sink
    • Fully programmable active Miller clamp
    • Compatible with negative gate supply
    • Compatible with current sense and temperature sense IGBTs
    • Integrated soft shutdown, two-level turn-off, active clamp, and segmented drive for wave shaping
    • CMTI > 100 V/ns
    • Compatible with 200 V to 1700 V IGBT/SiC, power range > 125 kW
    • Operating temperature range −40 °C to 125 °C
    • External creepage distance (CPG): > 7.8 mm
    • Operating frequency > 40 kHz
    • 5.0 V and 3.3 V tolerant MCU interface available
  • SPI interface
    • Safety monitoring and programming control features
    • PCIe connector providing external I/O connections (including GDIC control and SPI, motor current and application feedback, and power supply control). PCIe cable harness included
    • Additional SPI test port for GDIC debug
    • Connector for resolver/motor position sense
    • Connector for motor phase current sense
  • ASIL D ISO 26262 compliant
    • GD3100 is compliant with ISO 26262 ASIL C/D functional safety requirements
  • AEC-Q100
    • Automotive grade qualified
  • Safety Features
    • Certified to ASIL D ISO 26262 functional safety requirements for full diagnostics
    • Current, DESAT, and temperature sense inputs and ADC reporting for IGBT/SiC monitoring
    • Fast short-circuit protection, over-current protection, temperature warning and shutdown
    • Interrupt pin for fast response to faults
    • Built-in self-check of all analog and digital circuits
    • Continuous watchdog of die-to-die communications
    • Dead-time enforcement
    • Over and under-voltage supervision of all power supplies on both low and high voltage sides
    • Fail-safe state management pins on both low and high voltage sides
    • VGE real time cycle-by-cycle monitoring
  • Not Included (order separately):
    • MPC5777C-DEVB MCU: Based on the 32-bit Power Architecture® MPC5777C ultra-reliable MCU together with the FS65 System Basis Chip and the TJA1100 and TJA1145T/FD Ethernet and CAN FD PHY transceivers, the MPC5777C-DEVB facilitates hardware and software development, offering system performance, safety, and security.
    • DC link capacitor
    • IGBT module
    • Water cooling jacket

Buy Options

RDGD3100F3PH5EVB-Image

Click to expand

  • RDGD3100F3PH5EVB

  • 3-Phase Reference Design for Fuji M653 IGBTs featuring GD3100.

  • $1104.00 USD
  • For a quantity of 1
    • Availability: In stock
    • Inventory: 3
    • Shipping: Normally ships 1-2 business days
Buy from NXPBuy From Distributor

Documentation

Quick reference to our documentation types.

5 documents

Design Resources

Select a section:

Design Files

4 design files

Software

3 software files

Note: For better experience, software downloads are recommended on desktop.

Training

1 trainings

Support

What do you need help with?