For best experience this site requires Javascript to be enabled. To enable on your browser, follow our accessibility instructions.

Design Center
Training
Part III - How to Safely Charge a Battery Faster with NXP's eisBMS Chipset - The System Integration!

Part III - How to Safely Charge a Battery Faster with NXP's eisBMS Chipset - The System Integration!

March 25 2026 08:00 AM CST

Times are shown in your local time.

Language

English

About This Upcoming Webinar

NXP is launching an industry-first, battery management system (BMS) chipset with built-in Electrochemical Impedance Spectroscopy (EIS) using precise hardware-based synchronization of all battery cell measurements within a single high-voltage battery pack.

We are going to present:

How to make use of the Pin2Pin compatibility of the devices to accelerate integration into existing designs
A technical deep dive into what to measure and control with the EIS system
The different excitation options

View Part I of this webinar at: How to Safely Charge a Battery Faster with NXP’s eisBMS Chipset and look for Part II on software enablement.

Not sure you can join? You should still register! Slides and a recording of the session will be available after the webinar.

What You Will Learn:

The available enablement boards for NXP's Battery Management System (BMS) chipset with built-in Electrochemical Impedance Spectroscopy (EIS)
The excitation methods for a single or half-pack and the setup
The algorithms for compensation, temperature estimation and cell failure tests

Presented by

Philippe Perruchoud
BMS Senior Innovation Applications Engineer, NXP Semiconductors
Dr. Wenzel Prochazka
BMS Senior Product Manager for System Innovation, NXP Semiconductors
Antoine Vallade

BMS Engineer, NXP Semiconductors

MoreLess

Additional Resources

X-in-1 System Integration for Electric Vehicle (EV)

Stay In the Loop

Subscribe to our newsletter to stay updated with our latest developments and if you need further assistance, we are here to help.

Subscribe Contact Support