KIT9Z1J638EVM: Evaluation Kit - MM9Z1J638, Battery Sensor with CAN/LIN

Overview

NXP<sup>®</sup> KIT9Z1J638EVM Evaluation Kit Product Image

Specifications

Supported Devices

Power Management

  • MM9Z1_638 : Battery Sensor with CAN and LIN

Products

  • MC33901 : High-Speed CAN Transceiver Auto Applications

MoreLess

Technical and Functional Specifications

Connectivity
  • Embedded msCAN protocol and external high-speed CAN physical layer (MC33901)
  • LIN interface
  • Customizable GPIOs for voltage and temperature sensing
  • Support for USB multilink interface BDM
Power Management
  • Wide range battery current measurement; on-chip temperature measurement
  • Four battery voltage measurements with internal resistor dividers, and up to five direct voltage measurements for use with an external resistor divider
  • Measurement synchronization between voltage channels and current channels
  • Low-power modes with low-current operation
Sensors Five external temperature sensor inputs with internal supply for external sensors
  • LED indicators
  • Onboard BDM connection via open source OSBDM circuit using the MC9S08JM60 MCU

Buy

  • KIT9Z1J638EVM   Active

  • Evaluation Kit - MM9Z1_638 Battery Sensor with CAN and LIN
    • KIT9Z1J638EVM Hardware
    • Cable, USB A-M to B-M mini
    • Quick Reference Guide
    • 1 @ US
    • $211.00
      • Use Coupon
      • Distributor

        • Don't have an NXP coupon? You can purchase this product from one of our authorized distributors.

KIT9Z1J638EVM-Image
1579109330588723448640

Design Resources

Get Started

Documents   ( 4 )

Design Resources   ( 1 )

Software   ( 2 )

Documents

Data Sheet  ( 2 )

  • MC33901, High-speed CAN Transceiver - Data Sheet

    The MC33901/34901 are SMARTMOS® high-speed (up to 1.0 Mbits/s) transceivers providing the physical interface between the CAN protocol controller of an MCU and the physical dual wires CAN bus.

    • PDF
    • Rev 3.0
    • Jun 1, 2015
    • 1.1 MB
    • MC33901
    • English

  • MM9Z1_638D1, Intelligent Battery Sensor with CAN and LIN - Data Sheet

    The MM9Z1_638 is a fully integrated Battery monitoring device. The device supports precise current measurement via an external shunt resistor. It features four voltage measurement via an internal calibrated resistor divider or use of an external divider. It includes an internal temperature sensor, allowing close proximity battery temperature measurements, plus four external temperature sensor inputs.

    • PDF
    • Rev 5.0
    • Nov 23, 2016
    • 5.3 MB
    • MM9Z1_638D1
    • English

User Guide  ( 1 )

  • KIT9Z1J638EVM Evaluation Board - User Guide

    KIT9Z1J638EVM can be used to evaluate the MM9Z1_638 family device. It features a MM9Z1J638, integrating a S12Z microcontroller and a SMARTMOS® analog control IC into a single package solution. The MM9Z1J638 enables precision measurement of key battery parameters, current, voltage and temperature. The acquisitions are run through 3 16-bits sigma-delta ADCs embedded into the analog IC.

    • PDF
    • Rev 1.0
    • Mar 26, 2014
    • 2.1 MB
    • KT9Z1_638UG
    • English

Quick Reference Guide  ( 1 )

Design Resources

Design Tools & Files  ( 1 )

Printed Circuit Boards and Schematics  ( 1 )

Software

Embedded Software  ( 1 )

BSP, Drivers and Middleware  ( 1 )

Embedded Application Software  ( 1 )

Embedded Application Software - miscellaneous  ( 1 )

Get Help