-
OM7848
-
BGU8019 GNSS LNA evaluation board.
- BGU8019 LNA evaluation board in ESD safe packing
Design Files
1 design file
-
Design Files - miscellaneous
Board layout files
BGU8019 GNSS LNA evaluation board
OM7848 Receive alerts
The BGU8019 GPS LNA evaluation board simplifies the evaluation of the BGU8019 LNA for the GPS application. The evaluation board enables testing of the device performance and requires no additional support circuitry. The board is fully assembled with the BGU8019, the input series inductor and a decoupling capacitor. The board is supplied with two SMA connectors for input and output connection to RF test equipment. The BGU8019 can operate from a 1.5 V to 3.1 V single supply and consumes about 4.6 mA.
Product Details
Supported Devices
RF
LNAs for GPS
- BGU8019: SiGe:C Low-Noise Amplifier MMIC for GPS, GLONASS, Galileo and Compass
Features
- Noise figure (NF) = 0.6 dB
- Gain = 18.5 dB
- High input 1 dB compression point of -7 dBm
- High out of band IP3i of 6 dBm
Power Management
- Supply voltage 1.5 V to 3.1 V
- Power-down mode current consumption < 1 µA
- Input and output DC decoupled
- Optimized performance at low supply current of 4.6 mA
- ESD protection on all pins (HBM > 2 kV)
- Requires only one input matching inductor and one supply decoupling capacitor
Size
- 1.1 mm x 0.7 mm x 0.37 mm; 0.4 mm pitch: SOT1232
- Covers full GNSS L1 band, from 1559 MHz to 1610 MHz
- Integrated matching for the output
- 180 GHz transit frequency - SiGe:C technology
- Integrated temperature stabilized bias for easy design
Buy Options