LPC1313FBD48

Cortex-M3 with 32 kB flash, 8 kB SRAM, upto 72 MHz performance and on-chip power profiles


Quick ordering

DistributorIn Stock
OR:  

Latest videos

  • Elevator pitch for MCU...

    youtube video

    Elevator pitch for MCU


The LPC1313FBD48 is a ARM Cortex-M3-based microcontroller for embedded applications featuring a high level of integration and low power consumption. The LPC1313FBD48 operates at CPU frequencies of up to 72 MHz. The peripheral complement of the LPC1313FBD48 includes up to 32 kB of flash memory, up to 8 kB of data memory, one Fast-mode plus (Fm+) I2C interface, one UART, four general purpose timers, and up to 42 general purpose I/O pins.

Features and benefits

  • ARM Cortex-M3 processor, running at frequencies of up to 72 MHz
  • ARM Cortex-M3 built-in Nested Vectored Interrupt Controller (NVIC)
  • 32 kB on-chip flash programming memory
  • 8 kB SRAM
  • In-System Programming (ISP) and In-Application Programming (IAP)
  • UART with fractional baud rate generation
  • SSP controller with FIFO and multi-protocol capabilities
  • I2C-bus interface supporting full I2C-bus specification and Fast-mode Plus
  • Up to 42 General Purpose I/O (GPIO) pins
  • Four general purpose counter/timers
  • Programmable WatchDog Timer (WDT)
  • System tick timer
  • Serial Wire Debug and Serial Wire Trace port
  • High-current output driver (20 mA) on one pin
  • High-current sink drivers (20 mA) on two I2C-bus pins in Fast-mode Plus
  • Integrated PMU (Power Management Unit)
  • Three reduced power modes: Sleep, Deep-sleep, and Deep power-down
  • Single power supply (2.0 V to 3.6 V)
  • 10-bit ADC with input multiplexing among 8 pins
  • GPIO pins can be used as edge and level sensitive interrupt sources
  • Clock output function with divider
  • Processor wake-up from Deep-sleep mode via a dedicated start logic
  • Brownout detect with four separate thresholds
  • Power-On Reset (POR)
  • Integrated oscillator with an operating range of 1 MHz to 25 MHz
  • 12 MHz internal RC oscillator trimmed to 1 % accuracy
  • Programmable watchdog oscillator with a frequency range of 7.8 kHz to 1.8 MHz
  • System PLL allows CPU operation up to the maximum CPU rate
  • Code Read Protection (CRP) with different security levels
  • Unique device serial number for identification

Applications

  • eMetering
  • Lighting
  • Alarm systems
  • White goods
All information on this product information page is subject to the subsequent disclaimers:
Go to the parametric search
Parametric search

Parametrics of this product

SymbolParameterConditionsMinTyp/NomMaxUnit
fmaxmaximum frequency72MHz
Tjjunction temperature150°C
Tstgstorage temperature [0]-65150°C
VDD(IO)input/output supply voltage3.6V
VDDCcore supply voltage3.6V
Memory
Nbyte(on-chip)on-chip memoryFLASH32kB
Nbyte(on-chip)on-chip memoryRAM8kB
Other peripherals
Nionumber of I/O terminals42
Serial interfaces
Nperinumber of peripheralsSPI; SSP1
Nperinumber of peripheralsUSB Host0
Nperinumber of peripheralsUSB Device0
Nperinumber of peripheralsUSB OTG0
Nperinumber of peripheralsUART; fbit ≤ 4.5 Mbit/s1
Nperinumber of peripheralsI²C1
Nperinumber of peripheralsCAN0
Nperinumber of peripheralsUSB0
Timers
Nperinumber of peripheralsPWM0
Nperinumber of peripheralsWDT1
Nperinumber of peripheralsTIM4
Analog
Nperinumber of peripheralsADC; Nbit = 10 bit8

Similar products

Products / Packages

Type numberOrderable part numberOrdering code (12NC)Product statusPackagePackingMarking
LPC1313FBD48LPC1313FBD48,1519352 896 51151Volume productionSOT313-2
(LQFP48) 		Tray Pack, Bakeable, SingleStandard Marking
LPC1313FBD48/01LPC1313FBD48/01,159352 950 13151Volume productionSOT313-2
(LQFP48) 		Tray Pack, Bakeable, SingleStandard Marking

Quality, reliability & chemical content

Type numberOrderable part numberChemical contentRoHSLeadfree conversion dateRHFIFR (FIT)MTBF (hours)MSLMSL LF
LPC1313FBD48LPC1313FBD48,151LPC1313FBD48Always Pb-free11
LPC1313FBD48/01LPC1313FBD48/01,15LPC1313FBD48/01Always Pb-free11
Quality and reliability disclaimer

Quality and reliability disclaimer

Important Legal Notice on the product/generic quality information, No Warranty

NXP Semiconductors is providing this data for your convenience only. Please note however that NO WARRANTY, REPRESENTATION, GUARANTEE OR LEGALLY BINDING PRODUCT DESCRIPTION is provided by publishing this informational data, nor does NXP Semiconductors acknowledge or accept any liability related thereto. The documentation and data on NXP Semiconductors products can be found in the data sheets as officially published by NXP Semiconductors. For all purchase of products from NXP Semiconductors the NXP Semiconductors' General Terms and Conditions of Commercial Sale will apply.

NXP SEMICONDUCTORS PROVIDES THE DATA HEREUNDER “AS IS” WITHOUT WARRANTY WHATSOEVER. NXP SEMICONDUCTORS DOES NOT WARRANT OR REPRESENT THAT ANY DATA PROVIDED ON THIS WEBSITE IS CORRECT OR FIT FOR A PARTICULAR PURPOSE WHATSOEVER. IT IS PROVIDED WITHOUT ANY WARRANTY WHATSOEVER, WHETHER EXPRESS, IMPLIED OR OTHERWISE, REGARDING ITS ACCURACY, COMPLETENESS NONINFRINGEMENT OF INTELLECTUAL PROPERTY OR OTHERWISE AND MAY BE CHANGED, MODIFIED OR DELETED BY NXP SEMICONDUCTORS AT ANY TIME.

Any use of the data provided hereunder is at your own risk.

IN NO EVENT SHALL NXP SEMICONDUCTORS, BE LIABLE FOR ANY DIRECT, SPECIAL, INDIRECT, CONSEQUENTIAL, PUNITIVE, OR INCIDENTAL DAMAGES (INCLUDING WITHOUT LIMITATION DAMAGES FOR LOSS OF BUSINESS, BUSINESS INTERRUPTION, LOSS OF USE, LOSS OF DATA OR INFORMATION, AND THE LIKE) ARISING OUT OF THE USE OF THE DATA, WHETHER OR NOT BASED ON TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY, BREACH OF CONTRACT, BREACH OF WARRANTY OR ANY OTHER THEORY, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOTWITHSTANDING ANY DAMAGES THAT YOU MIGHT INCUR FOR ANY REASON WHATSOEVER (INCLUDING, WITHOUT LIMITATION, ALL DAMAGES REFERENCED ABOVE AND ALL GENERAL DAMAGES), THE ENTIRE LIABILITY OF NXP SEMICONDUCTORS, AND YOUR EXCLUSIVE REMEDY FOR ALL OF THE FOREGOING SHALL BE LIMITED TO ACTUAL DAMAGES INCURRED BY YOU BASED ON REASONABLE RELIANCE UP TO ONE DOLLARS (US$1.00). THE FOREGOING LIMITATIONS, EXCLUSIONS AND DISCLAIMERS SHALL APPLY TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, EVEN IF ANY REMEDY FAILS OF ITS ESSENTIAL PURPOSE.

Your use of this data, and all consequences of such use, is solely your responsibility. You must perform sufficient engineering and additional qualification testing in order to properly evaluate your application and determine whether a candidate NXP Semiconductors device is suitable for use in that application.

NXP Semiconductors' products are specifically designed and manufactured to be used within the electrical, thermal, mechanical and other parameters set forth in NXP Semiconductors' data sheets. Quality and reliability data provided by NXP Semiconductors, such as MTBF, MSL and FIT, is intended to be a non-binding estimate of product performance based upon diffusion process, history only. It does not imply that any performance levels reflected in such data can be met if the product is operated outside the conditions expressly stated in the latest published data sheet for a device or in your application.

The RoHS data provided hereunder is preliminary and non binding for NXP Semiconductors. NXP Semiconductors does not accept any liability related to this data.

NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage nor for any other use that is not explicitly agreed between the parties. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk.

Any use of NXP Semiconductors' products beyond the scope defined in the current NXP Semiconductors' data sheet voids all warranty responsibility of NXP Semiconductors with respect to such devices, and also voids all responsibility of NXP Semiconductors with respect to any applications assistance, product design, software performance or services of any kind that were or may have been performed in connection with the sale of any such devices.

Further, resale of NXP Semiconductors' products or services with statements different from or beyond the parameters stated by NXP Semiconductors for that product in official NXP Semiconductors data sheets, or without the warnings or instructions provided by NXP Semiconductors, voids all express and any implied warranties for the associated NXP Semiconductors product or service, and is an unfair and deceptive business practice.

Documentation for this product

TypeFormatTitleDate
Data sheetpdf32-bit ARM Cortex-M3 microcontroller; up to 32 kB flash and 8 kB SRAM; USB device (v.4.0)2011-06-20
Application notezipAN10905 - LPC1300 USB memrom (v.1.0)2010-01-26
Application notezipAN10904 - LPC1300 USB HID (v.1.0)2010-01-26
Application notepdfUSB HID with the LPC1300 on-chip driver (v.1.0)2010-01-28
Application notepdfUSB mass storage class with the LPC1300 on-chip driver (v.1.0)2010-01-28
Application notezipAN10918 - IEC60335 Class B library (with software) (v.1.0)2010-03-12
Application notezipDSP library for LPC1700 and LPC1300 (v.3.0)2012-05-16
Application notepdfUsing M3 DSP library filter functions (v.1.0)2010-05-26
Application notepdfDSP library for LPC1700 and LPC1300 (v.3.0)2010-06-28
Application notepdfDecoding DTMF tones using M3 DSP library FFT function (v.1.0)2010-06-28
Application notepdfFull-duplex software UART for LPC111x and LPC13xx (v.1.0)2010-07-16
Application notepdfUsing Code Read Protection in LPC1100 and LPC1300 (v.1.0)2010-08-30
Application notepdfUsing the LPC13xx low power modes and wake-up times on the LPCXpresso (v.2.0)2011-01-13
Application notepdfUSB In-System Programming with the LPC1300 (v.1.0)2010-10-05
Application notezipAN10955 - Full-duplex software UART for LPC111x and LPC13xx (v.1.0)2011-01-07
Application notezipAN10986 - USB In-system programming with the LPC1300 (v.1.0)2011-01-07
Application notezipAN10973 - Using the LPC13xx low power modes and wake-up times on the LPCXpresso (v.1.0)2011-01-10
Application notezipAN11031 - PCB layout and ADC circuit recommendations for LPC1100 and LPC1300 (with software) (v.1.0)2011-02-14
BrochurepdfCortex-M microcontroller brochure (v.2.0)2012-03-23
Errata sheetpdfErrata sheet LPC1311/01; LPC1313/01 (v.2.0)2012-02-03
Errata sheetpdfErrata sheet LPC1311/13 (v.2.0)2012-02-03
LeafletpdfLow-cost development platform for 32-bit LPC microcontroller family; NXP LPCXpresso (v.1.0)2011-01-28
LeafletpdfLow-power Cortex-M3 based microcontrollers simplify USB designs; NXP 72 MHz, 32-bit Cortex-M3™ microcontrollers LPC1300 (v.1.1)2011-01-28
LeafletpdfNXP 70-MHz, 32-bit Cortex-M0™ microcontrollers LPC1300 (Chinese version) (v.1.0)2011-02-03
ReportpdfDriving the LPC1300 with Murata resonators (v.1.0)2010-05-27
SoftwarezipAN11008 - Flash based non-volatile storage (v.1.0)2011-02-22
SoftwarezipAN10900 - FM+ I2C on LPC1300 (v.2.0)2012-05-09
User manualpdfLPC1311/13/42/43 User manual (v.4.0)2011-10-03

Ordering & availability

Type numberOrdering code(12NC)Orderable part numberRegionDistributorIn stockOrder quantityInventory dateBuy onlineSamples
LPC1313FBD489352 896 51151LPC1313FBD48,151EUARROW EUROPE1,0005/23/2012Buy onlinenot available
   NAFUTURE ELECTRONICS5005/23/2012Buy online 
   EUFUTURE ELECTRONICS UK5005/23/2012Buy online 
   ASIAFUTURE ELECTRONICS- ASIA5005/23/2012Buy online 
   EUAVNET EXPRESS EUROPE5005/24/2012Buy online 
   ASIAWPI50025005/14/2012Buy online 
   ASIAELEMENT14 APAC3995/24/2012Buy online 
   EUFARNELL3975/24/2012Buy online 
   NADIGI-KEY CORPORATION1645/24/2012Buy online 
   JAPANCHIP ONE STOPyes05/14/2012Buy online 
LPC1313FBD48/019352 950 13151LPC1313FBD48/01,15ASIAELEMENT14 APAC3995/24/2012Buy online 
   EUFARNELL3975/24/2012Buy online 
   NADIGI-KEY CORPORATION1665/24/2012Buy online 

Sample

Sample orders normally take 2-4 days for delivery.
If you do not have a direct account with NXP our network of global and regional distributors is available and equipped to support you with NXP samples. As a NXP customer you also have the option to order samples via our sales organisation.

Technical support

Do you want to ask technical questions to an NXP expert?
Please select one of the following options:

How to search?

Restricted Document

You are accessing a password protected document.
Please choose an option below

Fill in your name, company and e-mail address and you will receive an e-mail with a username and password for this restricted document.

First name*

Last name*

Company*

E-mail*

Comments

* required.

Print password request form:

Before we can grant you access to our confidential documents you are required to fill in, print and sign the password request form by which you comply with the NXP Non-disclosure agreement (NDA). Please email or fax the signed form to the email-address or fax-number specified on the form. After approval you will receive username and password via email. In case you already signed an NDA with NXP and already have username and password, you can skip this step.

Open document:

If you have received the username and password, you can open the document by clicking on the "open document" link. You will be prompted for username and password. After you fill in the username and password the download will start.

Forgot your password:

In case you forgot your password you can click on the "forgot your password" link to retrieve your password. Please complete the small form with your personal details and your request will be sent to NXP. You will receive an answer with your password shortly.

Request secure documentation

Fill in your name, company and e-mail address and you will receive an e-mail with a username and password for this secure document.

First name*

Last name*

Company*

E-mail*

Comments

* required.

Datasheet confidential

Fill in your details and you will be contacted

First name*

Last name*

Company*

Country*

Telephone number*

E-mail*

* required.

Your e-mail address will only be used to send the datasheet and will not be used for any other purposes.

No datasheet available

Fill in your details to receive notification when the datasheet becomes available

First name*

Last name*

Company*

E-mail*

* required.

Your email address will only be used to send the datasheet and will not be used for any other purposes.