5 V PMIC Solutions
-
PF8101-PF8201
ActiveThe PF8101/PF8201 is a PMIC for high performance i.MX8 applications, featuring 5 buck converters and 3 LDO regulators for system power generation.
Designed for pedestrians, bikers or drivers, our smart lighting solution presents the next generation of streetlights with processing, connectivity and sensing features for easier and secure life.
Created for high performance, our smart lighting solution utilizes the cross-over processors family (i.MX RT), or the first i.MX 8M Plus embedded system on chip (SoC) with neural processing units (NPU) that enable ML applications.
Protection is ensured through secure connectivity from edge to cloud, using the SE050 secure element and EdgeLock 2Go cloud credential management tools. Optimized for energy efficiency, the i.MX RT family of microprocessing units (MCUs) features low power modes and high MIPS/mA performance, powered by the ARM Cortex-M7 core, making it ideal for smart lighting applications.
For the best experience customizing and interacting with diagrams, please use a larger screen or maximize your browser window.
Recommendations for:
Smart Lighting High Performance
Select a block to see our recommendations.
The PF8101/PF8201 is a PMIC for high performance i.MX8 applications, featuring 5 buck converters and 3 LDO regulators for system power generation.
NXP i.MX RT1060 is a high-performance, low-power crossover MCU, powered by the Arm Cortex-M7 core running at 600 MHz, supported by MCUXpresso.
The i.MX 8M Plus family focuses on machine learning and vision, advanced multimedia, and industrial IoT with high reliability. For Smart Home, City, Retail, Industry 4.0.
High-efficiency DC-DC boost converter delivers 500mA output current and 3MHz switching frequency for space-constrained portable electronics
Load-switching power management IC with logic-controlled high-side switch delivers up to 2A continuous current with thermal and short-circuit protection
1x1 Wi-Fi 6 (802.11ax) solution Wi-Fi 6 and Bluetooth/Bluetooth LE 5.4 and 802.15.4 Coexistence of Wi-Fi and Bluetooth radios Interface for coexistence with external radios Interfaces with host processor: SDIO 3.0 for Wi-Fi and UART for Bluetooth and SPI for 802.15.4
1x1 Wi-Fi 6 (802.11ax) solution, Wi-Fi 6 and Bluetooth/Bluetooth LE 5.4, coexistence of Wi-Fi and Bluetooth radios, interface for coexistence with external radios, interfaces with host processor: SDIO 3.0 for Wi-Fi and UART for Bluetooth.
The 88W8978 is a highly integrated WLAN 11n (2.4G/5G) and Bluetooth 5.2 single-chip solution with a highly effective bill of material (BOM).
K32W061/41 advanced, secure and ultra-low power wireless microcontrollers for Zigbee®, Thread, IEEE® 802.15.4, and Bluetooth LE 5.0 integrate a comprehensive mix of analog and digital peripherals. These highly integrated devices allow developers to create multiprotocol products with rich features and contactless NFC commissioning.
The MCX W23 constitutes an ultra-low power BLE 5.3 wireless transceiver secured with PUF and Arm®-TrustZone® for IoT applications
MCX W71 MCUs with CM33 address a wide range of wireless applications with Bluetooth, Zigbee, Thread, and Matter over Thread connectivity.
The RW610 is a highly integrated, low-power wireless MCU designed for a broad array of applications, including connected smart home devices, gaming controllers, enterprise and industrial automation, smart accessories and smart energy.
The RW612 is a highly integrated, low-power tri-radio wireless MCU with an integrated MCU and Wi-Fi® 6 + Bluetooth® Low Energy (LE) 5.4 / 802.15.4 radios designed for a broad array of applications.
Secure, flexible IoT service platform
I2C-bus GPIO expander with temperature sensor, LED dimming and interrupt output for industrial and automotive applications
Low-voltage translating I/O expander with interrupt output and reset, featuring 16-bit GPIO ports for flexible system expansion and I2C-bus interface.
The PCAL9722 is an ultra-low voltage 22-bit I/O expander and translator with SPI interface and Agile I/O features to enable flexible designs and expanded capabilities for MCU and MPU applications.
Recommendations for:
Smart Lighting Low Power
Select a block to see our recommendations.
K32W061/41 advanced, secure and ultra-low power wireless microcontrollers for Zigbee®, Thread, IEEE® 802.15.4, and Bluetooth LE 5.0 integrate a comprehensive mix of analog and digital peripherals. These highly integrated devices allow developers to create multiprotocol products with rich features and contactless NFC commissioning.
The MCX W23 constitutes an ultra-low power BLE 5.3 wireless transceiver secured with PUF and Arm®-TrustZone® for IoT applications
MCX W72 MCUs with CM33 address a wide range of wireless applications with Bluetooth, Zigbee, Thread, and Matter over Thread connectivity.
JN5189/88 consists of advanced and ultra-low power wireless microcontrollers for Zigbee, Thread and IEEE 802.15.4 that integrates a comprehensive mix of analog and digital peripherals. These highly integrated devices allow developers to create products that have rich features and contactless NFC commissioning.
The RW610 is a highly integrated, low-power wireless MCU designed for a broad array of applications, including connected smart home devices, gaming controllers, enterprise and industrial automation, smart accessories and smart energy.
The RW612 is a highly integrated, low-power tri-radio wireless MCU with an integrated MCU and Wi-Fi® 6 + Bluetooth® Low Energy (LE) 5.4 / 802.15.4 radios designed for a broad array of applications.
P3T2030xUK is a ±2 °C temperature-to-digital converter with I3C interface in a 4-bump WLCSP rated from -40 °C to +125 °C.
P3T1035xUK is an I3C/I2C temperature-to-digital converter with ±0.5 °C accuracy from -40 °C to +125 °C range in WLCSP4.
Temperature sensor and thermal watchdog with 11-bit resolution measures ambient temps from -55 to +125°C with ±1°C accuracy and I2C interface
1x1 Wi-Fi 6 (802.11ax) solution Wi-Fi 6 and Bluetooth/Bluetooth LE 5.4 and 802.15.4 Coexistence of Wi-Fi and Bluetooth radios Interface for coexistence with external radios Interfaces with host processor: SDIO 3.0 for Wi-Fi and UART for Bluetooth and SPI for 802.15.4
1x1 Wi-Fi 6 (802.11ax) solution, Wi-Fi 6 and Bluetooth/Bluetooth LE 5.4, coexistence of Wi-Fi and Bluetooth radios, interface for coexistence with external radios, interfaces with host processor: SDIO 3.0 for Wi-Fi and UART for Bluetooth.
The 88W8978 is a highly integrated WLAN 11n (2.4G/5G) and Bluetooth 5.2 single-chip solution with a highly effective bill of material (BOM).
8-bit Fm+ I2C-bus LED driver with 8 PWM outputs provides individual LED brightness control for automotive interior lighting and display backlighting
PCA9959 is a daisy-chain SPI-compatible 4-wire serial bus controlled 24-channel constant current LED driver optimized for controlling 63 mA Red/Green/Blue/Amber (RGBA) and Infrared LEDs.
NFC Forum Type 2 tag solution with field detection capability enables smart product authentication and IoT connectivity across consumer applications
The SE050 product family of Plug and Trust devices offers enhanced CC EAL 6+ based security, for unprecedented protection against the latest attack scenarios
NXP's EdgeLock SE051, an extension to the widely trusted EdgeLock SE050 Plug & Trust secure element family, supports SEMS Lite for applet updatability and gives developers the option to create their own custom applets.
I2C-bus GPIO expander with temperature sensor, LED dimming and interrupt output for industrial and automotive applications
Low-voltage translating I/O expander with interrupt output and reset, featuring 16-bit GPIO ports for flexible system expansion and I2C-bus interface.
The PCAL9722 is an ultra-low voltage 22-bit I/O expander and translator with SPI interface and Agile I/O features to enable flexible designs and expanded capabilities for MCU and MPU applications.
Note: To see the recommended products close this window.
Quick reference to our documentation types
1 documents
Compact List
Quick reference to our software types.
3 software files
Note: For better experience, software downloads are recommended on desktop.
1 trainings