POS Terminal
Overview
Designs
Design a secure Point of Sale with PCI and EMVCo, NFC, chip card and magnetic stripe reader with NXP technology.
This solution is pre-certified for EMVCo and PCI PTS standards to give companies confidence.
The PIN Pad Point of Sale (POS) Solution has been designed to be a PIN Entry Device (PED) in the PCI certification process.
Specifications
POS Terminal
MCUMCUUSB Type C DeliveryUSB Type C DeliveryRTCRTCContact ReaderContact ReaderContactless ReaderContactless ReaderI2C ExpanderI2C ExpanderWireless Charging receiverWireless Charging receiverWi-Fi + BluetoothWi-Fi + BluetoothSecurity (EdgeLock Discrete)Security (EdgeLock Discrete)Serial USB Load SWSerial USB Load SWLED DriverLED DriverMCU
- K81_150 : Kinetis K81-150 MHz HW Cryptographic Co-Processor, Anti-Tamper and QuadSPI Microcontrollers (MCUs) Based on Arm® Cortex®-M4 Core
- i.MX RT1170 Crossover MCU Family - First GHz MCU with Arm® Cortex®-M7 and Cortex-M4 Cores
USB Type C Delivery
- PTN5100 : USB Type-C Power Delivery PHY and Protocol IC
RTC
- PCF2129 : Accurate RTC with Battery Backup – Selectable I²C-Bus or SPI
Contact Reader
- TDA8035HN : High-Integrated and Low-Power Smart Card Interface
- TDA8026ET : Multiple Smart Card Slot Interface
Contactless Reader
- PN5180 : Full NFC Forum-compliant frontend IC
I2C Expander
- PCAL6408A : Low-Voltage Translating, 8-Bit I²C-Bus/SMBus I/O Expander
Wireless Charging receiver
- MWPR1516 : 15 Watt Wireless Charging Receiver ICs
Wi-Fi + Bluetooth
- QN908x: Ultra-Low-Power Bluetooth Low Energy System on Chip Solution
- IW416: 2.4/5 GHz Dual-Band 1x1 Wi-Fi® 4 (802.11n) + Bluetooth® 5.1 Solution
- 88MW32X 802.11n Wi-Fi® Microcontroller SoC
- 88W8987: 2.4/5 GHz Dual-Band 1x1 Wi-Fi® 5 (802.11ac) + Bluetooth® 5.1 Solution
Security (EdgeLock Discrete)
- EdgeLock™ SE050: Plug & Trust Secure Element Family – Enhanced IoT security with maximum flexibility
Serial USB Load SW
- NX5P3290UK : USB PD and Type-C Current-Limited Power Switch
LED Driver
- PCA9626 : 24-Bit Fm+ I²C-Bus 100 MA 40 V LED Driver
POS Terminal
Design Resources
Documents ( 1 )
Documents
White Paper ( 1 )
-
A path to monetizing IoT services with secure controllers and processors (REV 0 )
A path to monetizing IoT services with secure controllers and processors
Get Help
Training and Events
Contactless POS Certification—Migration to EMVCo 3.0
Explore updated requirements defined for contactless POS. Review NXP's contactless POS portfolio and learn how to migrate to EMVCo 3.0 specifications.
Implementing Graphics in Real-time Industrial HMI with NXP MCUs and Embedded Wizard
Learn how to use TARA's Embedded Wizard GUI, integrated into MCUXpresso.
Get Your Product EMVCo Certified Using PN5180
Learn the tasks and processes required to design a PN5180 for EMVCo certified application.