Universal LCD driver for low multiplex rates
PCF8533U Receive alerts
- Not Recommended for New Designs
- This page contains information on a product that is not recommended for new designs.
The PCF8533 is a peripheral device which interfaces to almost any Liquid Crystal Display (LCD) with low multiplex rates. It generates the drive signals for any static or multiplexed LCD containing up to four backplanes and up to 80 segments and can easily be cascaded for larger LCD applications. The PCF8533 is compatible with most microcontrollers and communicates via the two-line bidirectional I²C-bus. Communication overheads are minimized by a display RAM with auto-incremental addressing, by hardware subaddressing and by display memory switching (static and duplex drive modes).
Product Details
Features
- Single-chip LCD controller and driver
- Selectable backplane drive configuration: static, 2, 3, or 4 backplane multiplexing
- Selectable display bias configuration: static, 1/2, or 1/3
- Internal LCD bias generation with voltage follower buffers
- 80 segment outputs allowing to drive:
- 40 7-segment alphanumeric characters
- 20 14-segment alphanumeric characters
- Any graphics of up to 320 elements
- 80 × 4 bit RAM for display data storage
- Auto-incremental display data loading across device subaddress boundaries
- Display memory bank switching in static and duplex drive modes
- Versatile blinking modes
- Independent supplies possible for LCD and logic voltages
- Wide power supply range: from 1.8 V to 5.5 V
- Wide LCD supply range: from 2.5 V for low threshold LCDs up to 6.5 V for high threshold twisted nematic LCDs
- Low power consumption
- 400 kHz I²C-bus interface
- May be cascaded for large LCD applications (up to 5120 elements possible)
- No external components required
- Compatible with Chip-On-Glass (COG) technology
- Manufactured using silicon gate CMOS process
Documentation
Quick reference to our documentation types.
1-5 of 11 documents
-
Data Sheet
Universal LCD driver for low multiplex rates
-
Application Note
Cascading NXP® LCD segment drivers
-
Application Note
EMC and system level ESD design guidelines for LCD drivers
-
Application Note
Design guidelines for COG modules with NXP® monochrome LCD drivers
-
Application Note
ESD and EMC sensitivity of IC