-
OM17000
-
BGU6005/N2 GPS LNA evaluation board.
- BGU6005/N2 LNA evaluation board in ESD safe packing
Design Files
1 design file
-
Printed Circuit Boards and Schematics
BGU6005N2 GPS LNA evaluation board: layout file
BGU6005/N2 GPS LNA Evaluation Board
OM17000 Receive alerts
The BGU6005/N2 GPS LNA evaluation board simplifies the evaluation of the BGU6005/N2 LNA for the GPS application. The evaluation board enables testing of the device performance and requires no additional support circuitry. The board is fully assembled with the BGU6005/N2, the input series inductor and a decoupling capacitor. The board is supplied with two SMA connectors for input and output connection to RF test equipment. The BGU6005/N2 can operate from a 1.5 V to 3.1 V single supply and consumes about 4.9 mA.
Product Details
Supported Devices
RF
LNAs for GPS
- BGU6005: Low Noise Amplifier MMIC for GPS, GLONASS, Galileo and Compass
Features
Connectivity
- Input and output DC decoupled
- Integrated matching for the output
Power Management
- Power-down mode current consumption < 2 µA
- Supply voltage 1.5 V to 3.1 V
- ESD protection on all pins (HBM > 2 kV)
- Optimized performance at low supply current of 4.9 mA
- Requires only one input matching inductor and one supply decoupling capacitor
Size
- 1 mm x 1.45 mm x 0.5 mm; SOT886
General
- Noise figure (NF) = 0.9 dB
- Integrated temperature stabilized bias for easy design
- High input 1 dB compression point of -6 dBm
- Gain 17.5 dB
- High out of band IP3i of 6 dBm
Buy Options