The Hovergames drone system is a modular flying robot development system that allows anyone interested in drone and automated driving technology to develop their own. The drone is PX4-enabled, the largest commercially deployed open source flight stack.
The platform is open and extensible. New components, from sensors to processors, can be easily added. The combination makes it helpful for learning and developing new forms of industrial mobility, whether it flies, roves on land or glides in water.
For the best experience customizing and interacting with diagrams, please use a larger screen or maximize your browser window.
Recommendations for:
Mobile Robotics Architecture
Select a block to see our recommendations.
MMRF2010N, MMRF2010GN 1030-1090 MHz, 250 W Peak, 50 V RF LDMOS integrated power amplifier for IFF transponder applications
High-performance RF LDMOS amplifier for aerospace and defense applications, delivering 250W peak power with 50V operation across 978-1090 MHz bandwidth
NXP's ASL3416SHN is a three channel buck mode LED driver IC delivering constant average DC current to LEDs for automotive exterior lighting applications.
NXP's ASL2416SHN is a two channel buck mode LED driver IC is a cost effective design solution, targeting automotive exterior and interior lighting applications.
NXP offers a complete portfolio of CAN with Flexible Data Rate (CAN FD) transceivers with all CAN functions and power modes.
NXP's CAN FD Signal Improvement technology TJA146 series are available as pin-compatible replacements to conventional HS-CAN transceivers fulfilling the ISO 11898-2:2016 specification
NXP’s new secure TJA115x CAN/CAN FD transceiver family provides a seamless and very efficient solution to secure classical CAN and CAN FD communication without using cryptography
Kinetis K series MCUs, based on Arm Cortex-M4 core, offers optimized performance, scalable integration, and low-power features
NXP i.MX RT series of crossover real-time MCUs feature the Arm Cortex-M core and real-time functionality for automotive and industrial applications.
FXLS8964AF is a compact 3-axis MEMS accelerometer designed for use in a wide range of automotive (convenience and security), industrial, and medical IOT applications that require ultra-low-power wake-up on motion functionality.
3-axis MEMS accelerometer designed for use in of industrial and medical IoT applications that require excellent offset and sensitivity stability over temperature.
3-axis MEMS accelerometer designed for use in automotive security and convenience applications applications that require excellent offset and sensitivity stability over temperature.
The i.MX 8M Mini is NXP's first embedded multicore applications processor with advanced 14LPC FinFET process technology for more speed and improved power efficiency.
The i.MX 8M Plus family focuses on machine learning and vision, advanced multimedia, and industrial IoT with high reliability. For Smart Home, City, Retail, Industry 4.0.
Bluetooth 5-ready wireless microcontroller with built-in multiprotocol radio for secure, low-power IoT applications and embedded systems
Bluetooth 5.0 system-on-chip with ultra-low power consumption enables secure IoT connectivity and extended battery life through optimized power management
Kinetis V Series MCUs are based upon the Arm Cortex-M0+ and M4 cores and are designed for BLDC, PMSM and ACIM motor control, as well as digital power conversion applications.
i.MX RT1050 is a high performance, low power crossover MCU powered by the Arm Cortex-M7 core running at 600 MHz with 32KB/32KB I/D cache. Supported by MCUXpresso.
CRN120 is a T2T NFC Forum wireless charging communication receiver frontend, which supports storing of configuration data and fast field detection for device wakeup.
PCA943x is integrated low-power wireless charging receiver, featuring dead battery supply, low standby consumption and protection mechanisms.
RDDRONE-T1ADAPT translates between 100BASE-T1 and 100BASE-TX Ethernet, well suited for debbuging of networks e.g. in Drones and automotive applications.
RDDRONE-T1ADAPT translates between 100BASE-T1 and 100BASE-TX Ethernet, well suited for debbuging of networks e.g. in Drones and automotive applications.
Recommendations for:
Hovergames Drone Systems
Select a block to see our recommendations.
NXP offers a complete portfolio of CAN with Flexible Data Rate (CAN FD) transceivers with all CAN functions and power modes.
NXP's CAN FD Signal Improvement technology TJA146 series are available as pin-compatible replacements to conventional HS-CAN transceivers fulfilling the ISO 11898-2:2016 specification
NXP’s new secure TJA115x CAN/CAN FD transceiver family provides a seamless and very efficient solution to secure classical CAN and CAN FD communication without using cryptography
NXP's ASL3416SHN is a three channel buck mode LED driver IC delivering constant average DC current to LEDs for automotive exterior lighting applications.
The NXP ASL5xxxyHz family is a fully featured and flexible Matrix LED Controller providing a cost-effective design solution, targeting advanced automotive exterior lighting applications.
The UJA1169ATK is a family of mini high-speed CAN System Basis Chips (SBC) containing an HS-CAN transceiver and an integrated 3.3 V or 5 V, 250 mA supply for a microcontroller.
The NTAG 5 is an NFC forum-compliant I2C bridge optimized for consumer and IoT applications with ultra-compact NFC footprint.
The NTAG 5 is an NFC forum-compliant I2C bridge optimized for consumer and IoT applications with ultra-compact NFC footprint.
The NTAG 5 is an NFC forum-compliant I2C bridge optimized for consumer and IoT applications with ultra-compact NFC footprint.
3-axis MEMS accelerometer designed for use in of industrial and medical IoT applications that require excellent offset and sensitivity stability over temperature.
3-axis MEMS accelerometer designed for use in automotive security and convenience applications applications that require excellent offset and sensitivity stability over temperature.
NXP barometric air pressure sensors 15 to 150 kPa (BAP) measuring absolute pressure and supporting simplified system designs
NXP offers a large, differentiated product portfolio of MEMS based motion sensors to meet the expanding needs of the automotive, medical and industrial segments
The NX20P3483UK is a product with combined multiple power switches and an LDO for USB PD application. The device includes a bi-directional high-voltage power switch which supports both 20V sink and 6V source; a 5V power switch for source and a 100mA LDO provides power supply for dead battery operation.
Combined Wi-Fi, Bluetooth and ThreadZigbee solutions from NXP deliver multiprotocol connectivity for secure, low-power IoT and automotive applications
Combined Wi-Fi, Bluetooth and ThreadZigbee solutions from NXP deliver multiprotocol connectivity for secure, low-power IoT and automotive applications
High-performance i.MX 6 applications processors deliver exceptional multimedia capabilities and scalable integration for automotive and industrial designs
The i.MX 8M Mini is NXP's first embedded multicore applications processor with advanced 14LPC FinFET process technology for more speed and improved power efficiency.
NXP i.MX RT1060 is a high-performance, low-power crossover MCU, powered by the Arm Cortex-M7 core running at 600 MHz, supported by MCUXpresso.
NXP i.MX RT series of crossover real-time MCUs feature the Arm Cortex-M core and real-time functionality for automotive and industrial applications.
The RDDRONE-BMS772 is a standalone BMS Reference Design suitable for mobile robotics such as drones and rovers, supporting 3 to 6 cells batteries.
Physical interface board enables seamless connectivity between NXP RAPID IoT prototyping kit and HoverGames drone for IoT-enabled flight applications
NXP’s Rapid IoT Prototyping Kit is a comprehensive, secure and power-optimized solution designed to accelerate prototype and development of an IoT end node.
RDDRONE-T1ADAPT translates between 100BASE-T1 and 100BASE-TX Ethernet, well suited for debbuging of networks e.g. in Drones and automotive applications.
Powerful flight management unit board enables precise control of robotic drones and autonomous vehicles using NXP K66 MCU and PX4 autopilot software
RDDRONE-T1ADAPT translates between 100BASE-T1 and 100BASE-TX Ethernet, well suited for debbuging of networks e.g. in Drones and automotive applications.
CRN120 is a T2T NFC Forum wireless charging communication receiver frontend, which supports storing of configuration data and fast field detection for device wakeup.
PCA943x is integrated low-power wireless charging receiver, featuring dead battery supply, low standby consumption and protection mechanisms.
Note: To see the recommended products close this window.
Quick reference to our documentation types
1 documents
Compact List
5 trainings
