A smart home gateway is an appliance that bridges a Wide Area Network (WAN/ Cloud) connection to a Local Area Network, usually Wi-Fi and/or Ethernet-based, in the home or customer premises. The WAN connection is typically a Fiber, Cable or xDSL connected to the gateway via a modem or PHY. The gateway functions include WAN to LAN bridging, Network Address Translation (NAT), IPv4 and IPv6 forwarding, Wireless Access Point management and voice over IP (VoIP) processing.
Additional functions may also be integrated such as a Hard Disk Drive (HDD) to support Video on Demand services or local caching of web pages or other content. Customers are increasingly looking to integrate low power radios such as Bluetooth, IEEE802.15.4 in the home gateway to allow connectivity with Internet of Things (IoT) devices for home automation and home security services. Near Field Communications (NFC) readers enhance ease of use by enabling simple “tap to pair” and “tap to personalize” use-cases.
|QorIQ® Layerscape 1012A Low Power Communication Processor||Layerscape LS1012A processor, integrates a single ARM Cortex-A53 core running up to 800 MHz|
|QorIQ® Layerscape 1024A Dual-Core Communications Processor||Dual Cortex-A9 cores with hardware packet forwarding, security and DPI acceleration.|
|Kinetis® KW41Z-2.4 GHz Dual Mode: BLE and 802.15.4 Wireless Radio Microcontroller (MCU) based on Arm® Cortex®-M0+ Core||BLE and 802.15.4 Wireless Radio Microcontroller (MCU) based on ARM® Cortex®-M0+ Core|
|QorIQ® Layerscape 1012A Broadband Home Router Application Solutions Kit||Linux®-based OpenWRT Broadband Home Router Software Solution|
|QorIQ® Layerscape 1012A Network Attached Storage Application Solutions Kit||Linux®-based OpenWRT Broadband Home Router Software Solution|
|Multi-output DC-DC regulator for Low Power LS1 Communication Processors||Multi-output DC-DC regulator designed to power single or dual core LS1|
|USB Host Controllers|
|3.3 V, 2 differential channel, 2 : 1 multiplexer/demultiplexer switch||Two differential channel, 2-to-1 multiplexer/demultiplexer switch for USB 3.1, PCI Express Generation 3, or other high-speed serial interface applications|
|NFC Controller Solutions|
|High performance NFC controller, supporting all NFC Forum modes, with integrated firmware and NCI interface||Complete NFC controller solution designed for contactless communication at 13.56 MHz and compatible with NFC forum requirements.|