The MPC5777x device adapters are calibration boards engineered for industrial and automotive applications. These Power Architecture® based devices offer production footprints and standardized tool connectors, allowing various calibration and debug hardware to be connected and reused.
Optionally, some devices provide communication between the calibration tool and the application board with the addition of 6 Tool I/O signals. Also, BGA to PGA solutions are available, allowing MPC5777x processors to plug into a BGA socket receiver.
MPC5777C on a 416 pin 1.0 mm BGA to PGA adapter.
MPC5777C on a 516 pin 1.0 mm BGA to PGA adapter.
512 pin 0.8 mm PGA socket spacer for VertiCal calibration tools.
292 pin 0.8 mm PGA socket spacer for VertiCal calibration tools.
MPC5777M 512 pin 0.8 mm PGA Logic Analyzer interface adapter.
MPC5777M 416 pin 1.0 mm PGA Logic Analyzer interface adapter.
MPC5777C 416 pin 1.0mm Calibration Adapter – uses ETAS ETK11 tool and Nexus connector.
MPC5777M 416 pin 1.0 mm BGA to PGA adapter with Aurora interface.
MPC5777M 512 pin 0.8 mm BGA to PGA adapter with Aurora interface.
MPC5777C 416 pin 1.0 mm calibration adapter – uses special Samtec connector.
MPC5777C Integrated Debug Board.
MPC5777C Integrated Debug Board FCA 2A.17.
MPC5777C Integrated Debug Board FCA 2A.17 @ 300Mhz.
Quick reference to our documentation types.
1 documents
1-5 of 23 design files
