S32G2 Vehicle Networking Evaluation Board

S32G-VNP-EVB

Roll over image to zoom in

The S32G-VNP-EVB is an evaluation and development board engineered for developing Vehicle Network Processing applications, such as service-oriented gateways.

Based on quad Arm® Cortex®-A53 cores and triple, dual-core lockstep Arm Cortex-M7 cores, the S32G-VNP-EVB offers a combination of automotive and enterprise networking technology with a wealth of interfaces (CAN/LIN/FlexRay/Ethernet) for vehicle networks, in addition to substantial safe compute performance. The S32G-VNP-EVB includes peripheral devices with PCI Express and USB interfaces that can be leveraged by OEMs, Tier 1s, and software ecosystem partners to shorten time to market.

Product Details

Select a section:

Block Diagram

S32G-VNP-EVB - Block Diagram

S32G-VNP-EVB - Block Diagram
Get diagram PDF

Supported Devices

Interfaces

Single and Multi-Channel LIN Transceivers

  • TJA1024HG: Quad LIN 2.2 A/SAE J2602 Transceiver

3.3 V / 5 V IO CAN Transceivers

  • TJF1051T: High-Speed CAN Transceiver
  • TJA1048: Dual High-Speed CAN Transceiver with Standby Mode
  • TJA1044: High-Speed CAN Transceiver with Standby Mode - Mantis Family

Automotive Ethernet PHY Transceivers

Automotive Ethernet Switches

  • SJA1105PQRS: SJA1105PEL/QEL/REL/SEL Series Ethernet Switches

FlexRay Transceivers

  • TJA1081B: FlexRay™ Node Transceiver - Clamp 30

High-Speed Multiplexer

  • CBTL01023GM: 3.3 V, One Differential Channel, 2-1 Multiplexer/Demultiplexer Switch for PCI Express® Gen3

Peripherals and Logic

Voltage Level Translators

  • NTSX2102: Dual-Supply Translating Transceiver (Open-Drain, Auto-Direction Sensing)

Power Management

Safety SBCs

  • VR5510: Multi-Channel (9) PMIC for S32G Processor – 8 High Power, 1 Low Power, Fit for ASIL D Safety Level

Processors and Microcontrollers

K2x USB

  • K26_180: Kinetis® K26-180 MHz, Dual High-Speed & Full-speed USBs, 2MB Flash Microcontrollers (MCUs) based on Arm® Cortex®-M4 Core

S32G Vehicle Network Processors

  • S32G2: S32G2 Processors for Vehicle Networking

Features

Processor

  • S32G2: Vehicle Network Processor - Quad Arm Cortex-A53 cores with Arm Neon™ plus triple, dual-core lockstep Arm Cortex-M7 cores

Microcontroller (MCU)

  • Kinetis® K26 180 MHz - Arm Cortex-M4, Dual High-Speed and Full-speed USBs, 2 MB

Power Management IC (PMIC)

  • VR5510: Multi-Channel (9) PMIC for S32G Processor – 8 High Power, 1 Low Power, fit for ASIL D Safety level

Switches

  • SJA1105PQRS: SJA1105PEL/QEL/REL/SEL Series Ethernet Switches

Transceivers

  • TJA1048: Dual high-speed CAN transceiver with Standby mode
  • TJA1044: High-Speed CAN Transceiver with Standby Mode - Mantis Family
  • TJF1051T: High-speed CAN transceiver
  • TJA1024HG: Quad LIN 2.2A/SAE J2602 transceiver
  • TJA1081_82_83: FlexRay node transceiver
  • TJA1102/TJA1102S: IEEE 100BASE-T1 compliant Ethernet PHY Transceivers
  • NTSX2102: Dual supply translating transceiver; open drain; auto direction sensing
  • SAF1508BET: ULPI Hi-Speed Universal Serial Bus On-The-Go transceiver

Interfaces

  • CBTL01023GM: 3.3 V, one differential channel, 2 : 1 multiplexer/demultiplexer switch for PCI Express Gen3

Buy Options

  • S32G-VNP-EVB

  • S32G2 Vehicle Networking Evaluation Board.

  • S32G-VNP-RDB2 is recommended for new designs.

    Kit contains

    • S32G-PROCEVB-S Processor Module
    • S32GRV-PLATEVB Platform Board
    • Power Supply
    • USB and Ethernet Cables
  • $2300.00 USD
  • For a quantity of 1
Buy From Distributor

Design Resources

Select a section:

Documentation

Quick reference to our documentation types.

Filters

5 documents

Design Files

Filters

4 design files

Software

Filters

1 software file

Note: For better experience, software downloads are recommended on desktop.