USB-KW24D512: IEEE^® 802.15.4 Packet Sniffer USB Dongle Form Factor

Overview

The USB-KW24D512 board is an IEEE^® 802.15.4 packet sniffer in a convenient USB dongle form factor.

Packet sniffers are essential for wireless network development allowing over-the-air traffic monitoring
As a standalone board, the USB-KW24D512 can also be used in a lab as a development platform and programmed as a network node (for example)

MoreLess

Target Applications

Wristband

Specifications

Supported Devices

Wireless Connectivity

Thread

KW2xD : Kinetis^® KW2xD-2.4 GHz 802.15.4 Wireless Radio Microcontroller (MCU) based on Arm^® Cortex^®-M4 Core

MoreLess

Technical and Functional Specifications

CPU	50 MHz Arm^®-Cortex^®-M4 CPU core MCU operating range: 1.7 V to 3.6 V, -40 ºC to +105 ºC
Memory	512 KB flash 64 KB SRAM
Power Management	Typical current consumption: 250 µA/MHz run, 1.7 µA RTC standby Peak typical current consumption: 17 mA TX (at 0 dBM) and 19 mA max RX Supply voltage: 5 VDC -102 dBM RX sensitivity and +8 dBM TX output power
Connectivity	Dual Personal Area Network (PAN) support in hardware Run two RF networks simultaneously USB 2.0 FS/LS H/D/OTG
	IEEE 802.15.4 compliant
	16-bit ADC
	Crypto engine: DES, 3DES, AES 128-256, SHA-1, SHA-256, MD5, RNG
	Active and passive tamper detection with RTC timestamp

Buy

USB-KW24D512 ^Active
USB Dongle, Kinetis W MCU, KW24, 50 MHz, 512 KB Flash
- USB-KW24D512 packet sniffer/dongle
- Quick start guide

USB-KW24D512
1 @ US
$90.00

Buy Direct

Availability?

Distributor

Distributor Name	Region	Inventory	Inventory Date

Upon selection of a preferred distributor, you will be directed to their web site to place and service your order. Please be aware that distributors are independent businesses and set their own prices, terms and conditions of sale. NXP makes no representations or warranties, express or implied, about distributors, or the prices, terms and conditions of sale agreed upon by you and any distributor.

Design Resources

Get Started

Get Started with the USB-K24D512

User Guide

The USB-KW24D512 development platform comes pre-programmed with the sniffer application to provide a demonstration of the device's capabilities.

Kinetis ZigBee Stack Demo Applications User's Guide^{(REV
11
)}
- 1.3 MB
- KZSDAUG
- [ English ]
USB-KW24D512 - Quick Start Guide^{(REV
1
)}
- 601.6 kB
- USBKW24D512QSG
- [ English ]

Documents

Reference Manual ( 3 )

USB-KW2x Hardware Reference Manual^{(REV
0.3
)}

This manual describes NXP’s MKW2xDxxx development platform hardware. The MKW2xDxxx is an IEEE® 802.15.4 compliant evaluation environment based on the NXP MKW2xDxxx device. The MKW2xDxxx family is Our latest generation ZigBee™ platform, which incorporates a complete low power 2.4 GHz radio frequency transceiver and a Kinetis family low power, mixed-signal Arm Cortex- M4 MCU into a single package.
- PDF
- 1.1 MB
- 30 Mar 2015
- USB-KW2XHWRM
- [ English ]
BeeStack™ Software Reference Manual for ZigBee 2007^{(REV
1.3
)}

This manual describes the NXP BeeStack^® protocol stack, its components, and their functional roles in building wireless networks. The function calls, application programming interfaces (API), and code examples included in this manual address every component required for communication in a ZigBee wireless network.
- PDF
- 1.7 MB
- 20 Jan 2016
- BSSRMZB2007
- [ English ]
BeeStack BlackBox ZTC Reference Manual^{(REV
3
)}

The NXP ZigBee Test Client (ZTC) diagnostic tool allows extensive testing of the MAC and BeeStack^® protocol layer interfaces and for communication with a Host processor when using the BeeStack Black Box application.
- PDF
- 7.4 MB
- 18 Jan 2016
- BSBBZTCRM
- [ English ]

Application Note ( 1 )

Wireless Coexistence in the 2.4 GHz Band^{(REV
0
)}

Wireless Coexistence, Bluetooth Low Energy, IEEE 802.15.4, Internet Of Things
- PDF
- 1.5 MB
- 17 Sep 2015
- AN5185
- [ English ]

Users Guide ( 2 )

Kinetis ZigBee Stack Demo Applications User's Guide^{(REV
11
)}

This document provides an introduction to the deployment and operation of the wireless network applications created using the ZigBee network protocol stack running on Kinetis KW2xD or Kinetis with MCR20A development platforms
- PDF
- 1.3 MB
- 19 Jan 2016
- KZSDAUG
- [ English ]
USB-KW24D512 - Quick Start Guide^{(REV
1
)}

USB Packet Sniffer/Dongle for Kinetis MKW22D and MKW24D Wireless MCUs Quick Start Guide
- PDF
- 601.6 kB
- 06 Jun 2014
- USBKW24D512QSG
- [ English ]

Release Note ( 2 )

Kinetis^® SDK v.1.1.0 Release Notes for the MK21DA5 and MKW24D5 Devices^{(REV
0
)}

These are the release notes for the NXP Kinetis Software Development Kit (KSDK) 1.1.0 for the MK21DA5 and MKW24D5 devices. The core of the Kinetis SDK is a set of drivers architected in two layers: the Hardware Abstraction Layer (HAL) and the Peripheral Driver Layer.
- PDF
- 544.9 kB
- 17 Feb 2015
- KSDK110MK21DA5MKW24D5RN
- [ English ]
MQX™ RTOS Release Notes for Kinetis^® SDK 1.1.0 MK21DA5 and MKW24D5 NXP^® Platforms^{(REV
0
)}

These are the Release Notes for the MQX™ RTOS for Kinetis SDK 1.1.0 TWR-K21D50M, TWR-KW24D512 and USB-KW24D512 NXP Platforms using the MK21DN512AVMC5 and MKW24D512VHA5 microcontrollers.
- PDF
- 605.2 kB
- 17 Feb 2015
- MQXKSDK110MK21DA5MKW24D5RN
- [ English ]

Design Resources

Design Tools & Files ( 1 )

Printed Circuit Boards and Schematics ( 1 )

USB-KW24D512 Reference Design^{(REV
B
)}

ZIP Printed Circuit Board for Reference Design: USB-KW24D512_PCBRD
- ZIP
- 3.7 MB
- 2014-07-17 00:00:00
- USB-KW24D512_PCBRD
- TWR-KW24D512 USB stick Reference Design
Download Download Details

Software

Embedded Software ( 4 )

BSP, Drivers and Middleware ( 1 )

BeeKit Wireless Connectivity Toolkit

Download Options

Protocol Stacks ( 3 )

Kinetis MKW2xD and MCR20A Connectivity Software (Linux)^{(REV
1.0.2
)}

Kinetis KW2xD and MCR20A Connectivity Software Version 1.0.2 provides Thread®, IEEE® 802.15.4 PHY/MAC and SMAC software for the Kinetis KW2xD wireless microcontrollers and the MCR20A 2.4GHz wireless transceivers.
- TGZ
- 171621 KB
- 2017-04-10 00:00:00
- MKW2xD-MCR20A-CONNECTIVITY-SOFTWARE
Download
Kinetis MKW2xD and MCR20A Connectivity Software^{(REV
1.0.2
)}

Kinetis KW2xD and MCR20A Connectivity Software Version 1.0.2 provides Thread®, IEEE® 802.15.4 PHY/MAC and SMAC software for the Kinetis KW2xD wireless microcontrollers and the MCR20A 2.4GHz wireless transceivers.
- EXE
- 46.3 MB
- 2017-04-10 00:00:00
- MKW2XD-MRC20A-CONNECTIVITY-SW
Download
Kinetis BeeStack ZigBee Protocol Stack^{(REV
5.0.0
)}
- EXE
- 10.8 MB
- 2015-01-22 00:00:00
- KINETIS-BEESTACK
Download

Development Software ( 2 )

Test, Debug and Analyzer Software ( 2 )

Test Tool for Connectivity Products^{(REV
12.9.2.2
)}

Test Tool for Connectivity Products v12.9.2.2. includes the following applications: Command Console, Firmware Loader, OTA Updates and ZigBee Gateway
- EXE
- 92.4 MB
- 2020-10-02 08:29:00
- Test_Tool_12.9.2.2
Download
Kinetis Protocol Analyzer Adapter^{(REV
1.2.8.0
)}

Kinetis Protocol Analyzer Adapter v1.2.8.0 for Wireshark provides PCAP support in Wireshark for wireless protocol sniffing using NXP Kinetis-W USB dongles. Supported protocols are Bluetooth® low energy v4.2 and IEEE® 802.15.4. The .NET Framework v4.0 and Wireshark v1.12.7 or newer are required to be previously installed.
- EXE
- 18.1 MB
- 2019-04-26 00:00:00
- KINETIS-PRTCL-ANALYZER-ADAPTER
Download

USB-KW24D512: IEEE® 802.15.4 Packet Sniffer USB Dongle Form Factor

Overview

Target Applications

Specifications

Supported Devices

Wireless Connectivity

Technical and Functional Specifications

Buy

USB-KW24D512 Active

Related Products

Design Resources

Get Started

User Guide

Documents ( 8 )

Design Resources ( 1 )

Software ( 6 )

Documents

Reference Manual ( 3 )

USB-KW2x Hardware Reference Manual (REV 0.3 )

BeeStack™ Software Reference Manual for ZigBee 2007 (REV 1.3 )

BeeStack BlackBox ZTC Reference Manual (REV 3 )

Application Note ( 1 )

Wireless Coexistence in the 2.4 GHz Band (REV 0 )

Users Guide ( 2 )

Kinetis ZigBee Stack Demo Applications User's Guide (REV 11 )

USB-KW24D512 - Quick Start Guide (REV 1 )

Release Note ( 2 )

Kinetis® SDK v.1.1.0 Release Notes for the MK21DA5 and MKW24D5 Devices (REV 0 )

MQX™ RTOS Release Notes for Kinetis® SDK 1.1.0 MK21DA5 and MKW24D5 NXP® Platforms (REV 0 )

Design Resources

Design Tools & Files ( 1 )

Printed Circuit Boards and Schematics ( 1 )

USB-KW24D512 Reference Design (REV B )

Software

Embedded Software ( 4 )

BSP, Drivers and Middleware ( 1 )

Protocol Stacks ( 3 )

Kinetis MKW2xD and MCR20A Connectivity Software (Linux) (REV 1.0.2 )

Kinetis MKW2xD and MCR20A Connectivity Software (REV 1.0.2 )

Kinetis BeeStack ZigBee Protocol Stack (REV 5.0.0 )

Development Software ( 2 )

Test, Debug and Analyzer Software ( 2 )

Test Tool for Connectivity Products (REV 12.9.2.2 )

Kinetis Protocol Analyzer Adapter (REV 1.2.8.0 )

Get Help

Recommended Communities

USB-KW24D512: IEEE^® 802.15.4 Packet Sniffer USB Dongle Form Factor

USB-KW24D512 ^Active

USB-KW2x Hardware Reference Manual^{(REV
0.3
)}

BeeStack™ Software Reference Manual for ZigBee 2007^{(REV
1.3
)}

BeeStack BlackBox ZTC Reference Manual^{(REV
3
)}

Wireless Coexistence in the 2.4 GHz Band^{(REV
0
)}

Kinetis ZigBee Stack Demo Applications User's Guide^{(REV
11
)}

USB-KW24D512 - Quick Start Guide^{(REV
1
)}

Kinetis^® SDK v.1.1.0 Release Notes for the MK21DA5 and MKW24D5 Devices^{(REV
0
)}

MQX™ RTOS Release Notes for Kinetis^® SDK 1.1.0 MK21DA5 and MKW24D5 NXP^® Platforms^{(REV
0
)}

USB-KW24D512 Reference Design^{(REV
B
)}

Kinetis MKW2xD and MCR20A Connectivity Software (Linux)^{(REV
1.0.2
)}

Kinetis MKW2xD and MCR20A Connectivity Software^{(REV
1.0.2
)}

Kinetis BeeStack ZigBee Protocol Stack^{(REV
5.0.0
)}

Test Tool for Connectivity Products^{(REV
12.9.2.2
)}

Kinetis Protocol Analyzer Adapter^{(REV
1.2.8.0
)}