M5253DEMO: MCF5253 Cost-Reduced Demo Board

Overview

3270 M5253DEMO Block Diagram

Specifications

Supported Devices

Processors and Microcontrollers

ColdFire® V2 Processors
  • MCF525X : Integrated ColdFire® V2 Microprocessor

MoreLess

Technical and Functional Specifications

MCF5253 External Interfaces
  • Synchronous Serial Interface (SSI) connected to audio codec WM8731
  • USB Support
    • Standalone USB host controller, support enhanced host controller interface(EHCI)
    • USB device mode
    • USB On-The-Go mode including host capability
    • Supports high-speed(480 Mbit/s), full-speed(12 Mbit/s), and low-speed host(1.5 Mbit/s) operations
    • Supports internal PHY (with UTMI+ interface)
  • Crystal/Clock
  • On board BDM
  • ATA interface
  • MMC/SD interface
  • 2 I2Cs
  • 4 QSPIs
  • 2 CANs
  • 3 UARTs
  • 6 12 bit resolution AD
  • Flex bus with 10/100 ethernet controller
  • Timers
  • External Interrupts
Memory Subsystems
  • 16-bit Width SDRAM
  • 2x64 Kbyte SRAM
  • 8 k on-chip BootROM
  • FLASH device for Boot Code Development
Power
  • Inputs:
    • 5 V (Input to the voltage regulator circuitry)
  • Regulated On-board voltages:
    • 5 V for USB VBUS support
    • 3.3 V – I/O Voltage
    • 1.2 V – CPU Core Voltage
1579109330588723448640

Design Resources

Get Started

Documents   ( 6 )

Design Resources   ( 1 )

Software   ( 1 )

Documents

User Guide  ( 2 )

  • M5253DEMO Quick Start Guide

    Get your M5253DEMO up and running, Fast!

    • PDF
    • Rev 0
    • Mar 10, 2009
    • 1.2 MB
    • M5253DEMOQSG
    • English

  • M5253DEMO User Manual

    The M5253 demo board is based on the NXP V2 architecture family chip, the MCF5253. This board is shipped with the MCF5253 populated to show the functionality of this family.

    • PDF
    • Rev 0
    • Oct 1, 2008
    • 315.2 KB
    • M5253DEMOUM
    • English

Fact Sheet  ( 1 )

Quick Reference Guide  ( 1 )

Supporting Information  ( 2 )

Design Resources

Design Tools & Files  ( 1 )

Printed Circuit Boards and Schematics  ( 1 )

Software

Embedded Software  ( 1 )

BSP, Drivers and Middleware  ( 1 )

Get Help