LPC1769FBD100

512kB flash, 64kB SRAM, Ethernet, USB, LQFP100 package


Quick ordering

DistributorIn Stock
OR:  

Latest videos

  • LPC4300: Inter-processor communication (Cortex-M4 ...

    youtube video

    LPC4300: Inter-processor communication (Cortex-M4 to Cortex-M0)

  • mbed Rapid Prototyping Demo at Embedded World 2010...

    youtube video

    mbed Rapid Prototyping Demo at Embedded World 2010

  • Introduction to NXP's LPC4300 Cortex-M4 based digi...

    youtube video

    Introduction to NXP's LPC4300 Cortex-M4 based digital controller


The LPC1769 is a Cortex-M3 microcontroller for embedded applications featuring a high level of integration and low power consumption at frequencies of 120 MHz. Features include 512 kB of flash memory, 64 kB of data memory, Ethernet MAC, USB Device/Host/OTG, 8-channel DMA controller, 4 UARTs, 2 CAN channels, 3 SSP/SPI, 3 I2C, I2S, 8-channel 12-bit ADC, 10-bit DAC, motor control PWM, Quadrature Encoder interface, 4 general purpose timers, 6-output general purpose PWM, ultra-low power Real-Time Clock with separate battery supply, and up to 70 general purpose I/O pins. The LPC1769 is pin-compatible to the 100-pin LPC2368 ARM7 MCU

Features and benefits

  • ARM Cortex-M3 processor, running at frequencies of up to 120 MHz
  • ARM Cortex-M3 built-in Nested Vectored Interrupt Controller (NVIC)
  • Up to 512 kB on-chip flash programming memory
  • Up to 64 kB On-chip SRAM
  • In-System Programming (ISP) and In-Application Programming (IAP)
  • Eight channel General Purpose DMA controller (GPDMA)
  • Ethernet MAC with RMII interface and dedicated DMA controller
  • USB 2.0 full-speed device/Host/OTG controller
  • Four UARTs with fractional baud rate generation, internal FIFO, and DMA support
  • CAN 2.0B controller with two channels
  • SPI controller with synchronous, serial, full duplex communication
  • Two SSP controllers with FIFO and multi-protocol capabilities
  • Three enhanced I2C bus interfaces
  • I2S (Inter-IC Sound) interface
  • 70 General Purpose I/O (GPIO) pins with configurable pull-up/down resistors
  • 12-bit/8-ch Analog/Digital Converter (ADC) with conversion rates up to 200 kHz
  • 10-bit Digital/Analog Converter (DAC) with dedicated conversion timer and DMA
  • Four general purpose timers/counters
  • One motor control PWM with support for three-phase motor control
  • Quadrature encoder interface that can monitor one external quadrature encoder
  • One standard PWM/timer block with external count input
  • Low power RTC with a separate power domain and dedicated oscillator
  • WatchDog Timer (WDT)
  • ARM Cortex-M3 system tick timer, including an external clock input option
  • Repetitive interrupt timer provides programmable and repeating timed interrupts
  • Each peripheral has its own clock divider for further power savings
  • Standard JTAG test/debug interface for compatibility with existing tools
  • Integrated PMU (Power Management Unit)
  • Four reduced power modes: Sleep, Deep-sleep, Power-down, and Deep power-down
  • Single 3.3 V power supply (2.4 V to 3.6 V)
  • Four external interrupt inputs configurable as edge/level sensitive
  • Non-maskable Interrupt (NMI) input
  • Wake-up Interrupt Controller (WIC)
  • Processor wake-up from Power-down mode via any interrupt
  • Brownout detect with separate threshold for interrupt and forced reset
  • Power-On Reset (POR)
  • Crystal oscillator with an operating range of 1 MHz to 25 MHz
  • 4 MHz internal RC oscillator trimmed to 1 % accuracy
  • Code Read Protection (CRP) with different security levels
  • Unique device serial number for identification purposes

Applications

  • eMetering
  • Lighting
  • Industrial networking
  • Alarm systems
  • White goods
  • Motor control
All information on this product information page is subject to the subsequent disclaimers:
Go to the parametric search
Parametric search

Demo boards

OM11035OM11035

Code Red LPC1768 Evaluation Board

OM11043OM11043

ARM mbed LPC1768 Board

OM11084OM11084

Keil LPC1769 Evaluation Board

OM13000OM13000

LPCXpresso™ Board for LPC1769


Parametrics of this product

SymbolParameterConditionsMinTyp/NomMaxUnit
fmaxmaximum frequency120MHz
Tambambient temperature-4085°C
Tstgstorage temperature-65150°C
VDD(IO)input/output supply voltage3.3V
VDDCcore supply voltage3.3V
Timers
Nperinumber of peripheralsTIM; Nbit = 32 bit4
Nperinumber of peripheralsPWM6
Nperinumber of peripheralsWDT1
Nperinumber of peripheralsRTC1
Serial interfaces
Nperinumber of peripheralsETH1
Nperinumber of peripheralsSPI; fbit ≤ 12.5 Mbit/s1
Nperinumber of peripheralsUSB; fbit ≤ 12 Mbit/s1
Nperinumber of peripheralsSSP2
Nperinumber of peripheralsI2C; fbit ≤ 1 Mbit/s2
Nperinumber of peripheralsCAN; fbit ≤ 1 Mbit/s2
Nperinumber of peripheralsI2S1
Nperinumber of peripheralsUART; fbit ≤ 6.25 Mbit/s4
Other peripherals
NioI/O pins70
Nperinumber of peripheralsQEI1
Memory
Nbyte(on-chip)on-chip memoryFLASH512kB
Nbyte(on-chip)on-chip memoryRAM64kB
Analog
Nperinumber of peripheralsDAC; Nbit = 10 bit1
Nperinumber of peripheralsADC; Nbit = 12 bit8

Similar products

Package

Type numberPackageOutline versionReflow-/Wave solderingPackingProduct statusMarkingOrderable part number, (Ordering code (12NC))
LPC1769FBD100LQFP100
(SOT407-1)
sot407-1_posot407-1_fr
HTQFP-HLQFP-LQFP-MSQFP-WAVE
Tray Dry Pack, Bakeable, SingleVolume productionStandard MarkingLPC1769FBD100,551
( 9352 905 22551 )

Quality, reliability & chemical content

Type numberOrderable part numberChemical contentRoHS / RHFLeadfree conversion dateMSLMSL LF
LPC1769FBD100LPC1769FBD100,551LPC1769FBD100Always Pb-free33
Quality and reliability disclaimer

Quality and reliability disclaimer

Important Legal Notice on the product/generic quality information, No Warranty

NXP Semiconductors is providing this data for your convenience only. Please note however that NO WARRANTY, REPRESENTATION, GUARANTEE OR LEGALLY BINDING PRODUCT DESCRIPTION is provided by publishing this informational data, nor does NXP Semiconductors acknowledge or accept any liability related thereto. The documentation and data on NXP Semiconductors products can be found in the data sheets as officially published by NXP Semiconductors. For all purchase of products from NXP Semiconductors the NXP Semiconductors' General Terms and Conditions of Commercial Sale will apply.

NXP SEMICONDUCTORS PROVIDES THE DATA HEREUNDER “AS IS” WITHOUT WARRANTY WHATSOEVER. NXP SEMICONDUCTORS DOES NOT WARRANT OR REPRESENT THAT ANY DATA PROVIDED ON THIS WEBSITE IS CORRECT OR FIT FOR A PARTICULAR PURPOSE WHATSOEVER. IT IS PROVIDED WITHOUT ANY WARRANTY WHATSOEVER, WHETHER EXPRESS, IMPLIED OR OTHERWISE, REGARDING ITS ACCURACY, COMPLETENESS NONINFRINGEMENT OF INTELLECTUAL PROPERTY OR OTHERWISE AND MAY BE CHANGED, MODIFIED OR DELETED BY NXP SEMICONDUCTORS AT ANY TIME.

Any use of the data provided hereunder is at your own risk.

IN NO EVENT SHALL NXP SEMICONDUCTORS, BE LIABLE FOR ANY DIRECT, SPECIAL, INDIRECT, CONSEQUENTIAL, PUNITIVE, OR INCIDENTAL DAMAGES (INCLUDING WITHOUT LIMITATION DAMAGES FOR LOSS OF BUSINESS, BUSINESS INTERRUPTION, LOSS OF USE, LOSS OF DATA OR INFORMATION, AND THE LIKE) ARISING OUT OF THE USE OF THE DATA, WHETHER OR NOT BASED ON TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY, BREACH OF CONTRACT, BREACH OF WARRANTY OR ANY OTHER THEORY, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOTWITHSTANDING ANY DAMAGES THAT YOU MIGHT INCUR FOR ANY REASON WHATSOEVER (INCLUDING, WITHOUT LIMITATION, ALL DAMAGES REFERENCED ABOVE AND ALL GENERAL DAMAGES), THE ENTIRE LIABILITY OF NXP SEMICONDUCTORS, AND YOUR EXCLUSIVE REMEDY FOR ALL OF THE FOREGOING SHALL BE LIMITED TO ACTUAL DAMAGES INCURRED BY YOU BASED ON REASONABLE RELIANCE UP TO ONE DOLLARS (US$1.00). THE FOREGOING LIMITATIONS, EXCLUSIONS AND DISCLAIMERS SHALL APPLY TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, EVEN IF ANY REMEDY FAILS OF ITS ESSENTIAL PURPOSE.

Your use of this data, and all consequences of such use, is solely your responsibility. You must perform sufficient engineering and additional qualification testing in order to properly evaluate your application and determine whether a candidate NXP Semiconductors device is suitable for use in that application.

NXP Semiconductors' products are specifically designed and manufactured to be used within the electrical, thermal, mechanical and other parameters set forth in NXP Semiconductors' data sheets. Quality and reliability data provided by NXP Semiconductors, such as MTBF, MSL and FIT, is intended to be a non-binding estimate of product performance based upon diffusion process, history only. It does not imply that any performance levels reflected in such data can be met if the product is operated outside the conditions expressly stated in the latest published data sheet for a device or in your application.

The RoHS data provided hereunder is preliminary and non binding for NXP Semiconductors. NXP Semiconductors does not accept any liability related to this data.

NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage nor for any other use that is not explicitly agreed between the parties. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk.

Any use of NXP Semiconductors' products beyond the scope defined in the current NXP Semiconductors' data sheet voids all warranty responsibility of NXP Semiconductors with respect to such devices, and also voids all responsibility of NXP Semiconductors with respect to any applications assistance, product design, software performance or services of any kind that were or may have been performed in connection with the sale of any such devices.

Further, resale of NXP Semiconductors' products or services with statements different from or beyond the parameters stated by NXP Semiconductors for that product in official NXP Semiconductors data sheets, or without the warnings or instructions provided by NXP Semiconductors, voids all express and any implied warranties for the associated NXP Semiconductors product or service, and is an unfair and deceptive business practice.

Documentation for this product

File nameTitleTypeFormatDate
LPC1769_68_67_66_65_64_6332-bit ARM Cortex-M3 microcontroller; up to 512 kB flash and 64 kB SRAM with Ethernet, USB 2.0 Host/Device/OTG, CANData sheetpdf2014-04-04
AN10778PCB layout guidelines for NXP MCUs in BGA packagesApplication notepdf2011-04-22
AN10898BLDC motor control with LPC1700Application notezip2013-07-11
AN10913_CM3_DSP_library_v1_0_0DSP library for LPC1700 and LPC1300Application notezip2012-05-16
AN10913DSP library for LPC1700 and LPC1300Application notepdf2010-06-28
AN10974LPC176x/175x 12-bit ADC design guidelinesApplication notepdf2010-09-06
AN10974_-_LPC176x_175x_12-bit_ADC_design_guidelinesAN10974 - LPC176x/175x 12-bit ADC design guidelinesApplication notezip2011-01-07
AN11229UUencoding for UART ISPApplication notepdf2012-07-06
AN11244emWin startup guideApplication notepdf2012-08-16
AN10974_ZHLPC176x/175x 12-bit ADC design guidelinesApplication notepdf2012-08-23
AN10898_ZHBLDC motor control with LPC1700Application notepdf2012-08-23
AN10943_ZHDecoding DTMF tones using M3 DSP library FFT functionApplication notepdf2012-08-23
AN10866LPC1700 secondary USB bootloaderApplication notezip2013-07-22
AN11257SPI secondary boot loader Application notezip2013-07-22
AN11318How to implement the PMBus software stack Application notezip2013-07-22
AN10916FAT library EFSL and FatFs port on NXP LPC1700Application notezip2013-08-09
AN11071In-Application Programming for the LPC1700Application notezip2013-08-09
AN11070Accessing SDC/MMC card using SPI/SSP on LPC1700Application notezip2013-08-09
AN11095Capacitive touch sensing using the LPC176x/5xApplication notezip2013-08-09
AN11178MP3 player solution on NXP LPC1700 seriesApplication notezip2013-08-09
AN11241AES encryption and decryption software on LPC microcontrollersApplication notezip2014-03-17
AN11258I2C secondary boot loaderApplication notezip2013-08-09
AN10943Decoding DTMF tones using M3 DSP library FFT functionApplication notezip2013-08-09
AN10917Memory to DAC data transfers using the LPC1700's DMAApplication notezip2013-08-09
AN11392Guidelines for full-speed USB on NXP's LPC microcontrollersApplication notepdf2014-02-20
AN11085Using Speex in NXP's LPC175x/6x MCU familyApplication notezip2013-08-30
AN10908Wakeup from Deep Sleep using the CANActivity interruptApplication notezip2014-01-13
AN10918NXP LPC Cortex-M3 IEC60335 Class B libraryApplication notezip2014-01-23
ES_LPC176XErrata sheet LPC1769/68/67/66/65/64/63Errata sheetpdf2014-04-03
75016842Low-cost development platform for 32-bit LPC microcontroller family; NXP LPCXpressoLeafletpdf2011-01-28
75016846Cortex-M3 based microcontrollers with Ethernet, USB, CAN and 12-bit ADC; 120 MHz, 32-bit Microcontrollers with Cortex-M3™ core, LPC1700 seriesLeafletpdf2011-01-27
LPC1768Rapid prototyping for the LPC1768 MCULeafletpdf2009-09-01
AN10859AN10859 - LPC1700 Ethernet MII Management (MDIO) via softwareSoftwarezip2012-09-18
AN10875AN10875 - IEC 60601-1-8 audible alert generator using the LPC1700Softwarezip2013-06-10
UM10360LPC176x/5x User manualUser manualpdf2014-04-03
sot407-1_frFootprint for reflow soldering SOT407-1Reflow solderingpdf2009-10-08
sot407-1_poplastic low profile quad flat package; 100 leads; body 14 x 14 x 1.4 mmOutline drawingpdf2009-10-08
HTQFP-HLQFP-LQFP-MSQFP-WAVEFootprint for wave solderingWave solderingpdf2009-10-08

Ordering & availability

Type numberOrdering code (12NC)Orderable part numberRegionDistributorIn stockOrder quantityInventory dateBuy onlineSamples
LPC1769FBD1009352 905 22551LPC1769FBD100,551NADigiKey3,30214/22/2014Buy online 
   NAAvnet Express604104/22/2014Buy online 
   NAFuture Electronics117104/21/2014Buy online 
   NANewark element1481122/04/2014Buy online 
   EUFarnell Europe74121/04/2014Buy online 
   ASIAChip One Stop6504/22/2014Buy online 

Sample

Sample orders normally take 2-4 days for delivery.
If you do not have a direct account with NXP our network of global and regional distributors is available and equipped to support you with NXP samples. As a NXP customer you also have the option to order samples via our sales organisation.

Technical support

Do you want to ask technical questions to an NXP expert?
Please select one of the following options:

Demo boards

OM11035OM11035

Code Red LPC1768 Evaluation Board

OM11043OM11043

ARM mbed LPC1768 Board

OM11084OM11084

Keil LPC1769 Evaluation Board

OM13000OM13000

LPCXpresso™ Board for LPC1769

Find answers to your design questions on this page. If available you can find information in our Knowledge Base or Community Discussions or you can find NXP models, Demo boards and Design tools.

Knowledge Base

The Knowledge Base contains questions and answers provided by NXP technical experts.

Please wait. Loading data...


No items available.

Community Discussions

These discussions are between users of the Community. These users can be NXP technical experts or other Community users.

Please wait. Loading data...


No items available, please go to the Community to engage in a new discussion.

Disclaimer All Knowledge Base items are matched using search logic, so not all results may be equally relevant.
Any opinions, advice, statements or other information in the discussions posted or transmitted by any third party are the responsibility of the author of that message and not of NXP.

{"subtitle":"","category":[],"basictype":["LPC1769FBD100"]}

How to search?

Already registered to MyNXP? or Register

Feedback

Restricted Document

You are accessing a password protected document.
Please choose an option below

Fill in your name, company and e-mail address and you will receive an e-mail with a username and password for this restricted document.

First name*

Last name*

Company*

E-mail*

Comments

* required.

Print password request form:

Before we can grant you access to our confidential documents you are required to fill in, print and sign the password request form by which you comply with the NXP Non-disclosure agreement (NDA). Please email or fax the signed form to the email-address or fax-number specified on the form. After approval you will receive username and password via email. In case you already signed an NDA with NXP and already have username and password, you can skip this step.

Open document:

If you have received the username and password, you can open the document by clicking on the "open document" link. You will be prompted for username and password. After you fill in the username and password the download will start.

Forgot your password:

In case you forgot your password you can click on the "forgot your password" link to retrieve your password. Please complete the small form with your personal details and your request will be sent to NXP. You will receive an answer with your password shortly.

Request secure documentation

Fill in your name, company and e-mail address and you will receive an e-mail with a username and password for this secure document.

First name*

Last name*

Company*

E-mail*

Comments

* required.

Datasheet confidential

Fill in your details and you will be contacted

First name*

Last name*

Company*

Country*

Telephone number*

E-mail*

* required.

Your e-mail address will only be used to send the datasheet and will not be used for any other purposes.

No full datasheet available

Fill in your details to receive notification when the datasheet becomes available

First name*

Last name*

Company*

E-mail*

* required.

Your email address will only be used to send the datasheet and will not be used for any other purposes.