i.MX RT Industrial Drive Development Platform

I.MX-RT-INDUSTRIAL-DRIVE-DEV-PLATFORM
  • Preproduction
  • This page contains information on a preproduction product. Specifications and information herein are subject to change without notice. For additional information contact support or your sales representative.

Roll over image to zoom in

The Industrial Drive Development Platform shows how a single i.MX RT1176 Crossover MCU can control up to four different motors while managing wired or wireless connectivity and an HMI interface. Leverage this flexible three-board kit to evaluate motor control performance, speed up motor control designs based on the i.MX RT Crossover MCUs and learn to use NXP EdgeLock® security technology to enable safer communications and industrial control.

Product Details

Select a section:

Block Diagram

Choose a diagram:

i.MX RT Industrial Drive Development Platform

i.MX RT Industrial Drive Development Platform

SW Architecture

i.MX RT Industrial Drive Development Platform platform overview
Get diagram PDF

Supported Devices

Sensors

I2C Digital Temperature Sensors

  • PCT2075: I2C-Bus Fm+, 1 Degree C Accuracy, Digital Temperature Sensor And Thermal Watchdog

Interfaces

Secure CAN Transceivers

  • TJA1152: Secure HS-CAN Transceiver with Standby Mode

CAN Signal Improvement

  • TJA1462: CAN Signal Improvement Capability Transceiver with Standby Mode

Security and Authentication

Authentication

  • SE050: EdgeLock® SE050: Plug & Trust Secure Element Family – Enhanced IoT security with high flexibility

Power Management

BLDC, H-Bridge, Stepper

  • GD3000: 3-Phase Brushless Motor Pre-Driver

PMICs

  • PF5020: Multi-Channel (5) PMIC for Automotive Applications – 4 High Power and 1 Low Power, Fit for ASIL B Safety Level

Processors and Microcontrollers

i.MX RT Crossover MCUs

  • i.MX-RT1170: i.MX RT1170 First GHz Crossover MCU with Arm® Cortex®-M7 and Cortex-M4 Cores

RFID

NFC Readers

  • PN7462: NFC Cortex®-M0 All-in-One Microcontroller with Optional Contact Interface for Access Control

Peripherals and Logic

Analog Front-End

  • NAFEx1388: Highly Configurable 8 Channel ±25 V Universal Input Low Power Analog Front-End

Features

MCU

  • 6468 CoreMark with Cortex-M7 up to 800 MHz + Arm Cortex-M4 up to 400 MHz
  • 2 MB SRAM with 512 KB of TCM for Cortex-M7 and 256 KB of TCM for Cortex-M4
  • Advanced security, including secure boot and crypto engines, and is part of the EdgeLock® Assurance program
  • 1 Gb ENET with TSN
  • MIPI® DSI
  • Supported by MCUXpresso suite of software and tools

Tools

  • Supported by FreeMASTER, MCUXPresso SDK, IDE and configuration tools
  • Integrated motor control subsystem with high speed ADCs and Comparators, flexible multi-channel PWM outputs, Quadrature encoders/decoders, etc

Support Package

  • Schematics, layout, Gerbers, BOM, sample source code, user guide and video tutorial

Power Management

  • Highly flexible motor control; up to 4 motors can be controlled simultaneously
  • The NAFE 13388 provides a flexible interface and has over-voltage protection up
  • It can accurately read DC bus voltage, DC bus current and board temperature
  • The GD3000 interfaces to a MCU via six direct input control signals, a SPI port for device setup and asynchronous reset, enable and interrupt signals

Security

  • Provides meaningful guidance and collateral to ease the IEC 62443-4-2 certification journey with NXP products
  • Ciphers and RNG, secure RTC, fuse and HAB
  • EdgeLock SE05X is Common Criteria EAL 6+ certified up to OS level as a safe environment to run preinstalled NXP IoT applets, supporting comprehensive encrypted communications and secured lifecycle management

Flexible Interface

  • USB, CAN, RS485, NFC compatible, Ethernet. Connector with expansion options for WiFi or Bluetooth

Buy Options

  • ISI-QMC-DGC02

  • i.MX RT Industrial Drive Development Platform.

  • Control board, which integrates MCU chip, debugging interface and Ethernet TSN port.

    Kit contains

    • 1x board ISI-QMC-DGC-02
    • 1x USB A to µUSB B cable

  • ISI-QMC-DB02

  • i.MX RT Industrial Drive Development Platform.

  • Expansion board for Daughter Card, integrates multiple peripherals for communication, security and display.

    Kit contains

    • 1x board ISI-QMC-DB-02
    • 2x IX Industrial Ethernet to RJ45 cable
    • 2x Male to Male DC barrel jack cable
    • 1x USB A Male to USB A Female cable
    • 2x Male to Male DC barrel jack cable
    • 1x GMMC NFC Pocket Reader
    • 8x standoffs and 16x screws to fix FRDM boards

  • ISI-QMC-PSB02B

  • i.MX RT Industrial Drive Development Platform.

  • Transforms the control commands into power signals to drive servo motor (200W up to 450W)

    ** Analog Front End NAFE13388 is not populated in this board variant

    • 1x ISI-QMC-PSB-02
    • 1x 10-Pin flat cable to deliver power to digital board
    • 1x 30-Pin flat cable. Control signals between Digital Board and Power Stage Board
    • 18x standoffs and 9x screws to stack additional Power Stage Board on top

  • ISI-QMC-PSB02

  • i.MX RT Industrial Drive Development Platform.

  • Transforms the control commands into power signals to drive servo motor (200W up to 450W)

    • 1x ISI-QMC-PSB-02
    • 1x 10-Pin flat cable to deliver power to digital board
    • 1x 30-Pin flat cable. Control signals between Digital Board and Power Stage Board
    • 18x standoffs and 9x screws to stack additional Power Stage Board on top
  • $865.00 USD
  • For a quantity of 1
    • Availability: In stock
    • Inventory: 5
    • Shipping: Normally ships 1-2 business days
Buy from NXPBuy From Distributor

Documentation

Quick reference to our documentation types.

Filters

4 documents

Design Resources

Select a section:

Design Files

Filters

1 design file

  • Design Files - miscellaneous

    UML Model - SW Architecture

    ZIPRev 0.0Sep 30, 2022186 BUML-MOD-SW-ARCH
    Download

Software

Filters

1 software offerings

Training

Filters