DEMO9S08LG32: S08LG32 Demonstration Board

Overview

WT3253

Specifications

Supported Devices

Processors and Microcontrollers

8-Bit S08 MCUs
  • S08LG : 8-bit Segment LCD S08LG32 and S08LG16 MCUs

MoreLess

Technical and Functional Specifications

Microcontroller MC9S08LG32, 80 LQFP
Connectivity
  • Integrated P&E USB-BDM
  • 5K ohm POT w /LP filter for ADC input
  • 80-pin MCU I/O pin header
  • 2.0 mm barrel connector
  • USB connector
Power Management
 On-board +5 V regulator
Display On-board 4x40 custom LCD glass
Components
  • 10 push switches; 8 user, 1 reset, 1 IRQ
  • 12 LED indicators; 8 user, VDD, IRQ, USB, and reset
1579109330588723448640

Design Resources

Get Started

Documents   ( 9 )

Design Resources   ( 1 )

Software   ( 3 )

Documents

Application Note  ( 7 )

  • Interfacing an LCD with the MC9S08LG32

    The MC9S08LG32 is a member of the NXP® HCS08 family. It uses the HCS089 core and integrated peripherals such as LCD, ADC, IIC, SPI, TPM, and RTC. This application note describes how the LCD module works for the MC9S08LG32; provides an example that illustrates the hardware connections and software driver for the LCD; explains configuration of the LCD module; and describes use of the LCD glass with the MC9S08LG32.

    • PDF
    • Rev 1
    • Feb 25, 2009
    • 299.9 KB
    • AN3802
    • English

  • LCD Driver for MC9S08LG32

    MC9S08LG32 is a member of NXP®.s HCS08 family of MCUs. It uses the S08 core and integrates abundant peripherals, such as LCD, SPI, IIC, SCI, and ADC. This application note describes the LCD driver in software that allows you to use the LCD functionality to its fullest.

    • PDF
    • Rev 0
    • Feb 25, 2009
    • 235.4 KB
    • AN3823
    • English
    • Associated File: AN3823SW

  • How to Handle Dual Flash Architecture in MC9S08LG32

    The MC9S08LG32 is a member of the low-cost, low-power, high-performance HCS08 family of 8-bit MCUs. It provides 32 KB of 8-bit flash in two 16K blocks, divided into 512-byte pages. In-circuit programming allows the operating program to be loaded into flash after final assembly. It’s possible to program the entire array via single-wire background debug interface. Because it needs no special voltages for flash erase and programming, in-application programming is also possible via other software-controll

    • PDF
    • Rev 1
    • Feb 25, 2009
    • 211.5 KB
    • AN3821
    • English

  • Interfacing Stepper Motor with MC9S08LG32

    The MC9S08LG32 is a low cost microcontroller and can be applied to several applications using different input signals. This application note describes how to control a low current stepper motor using the MC9S08LG32; how to drive a stepper motor when there is no stepper motor driver within the MCU; how to configure MC9S08LG32 to drive a stepper motor; how the input signal is managed, implemented, and used; and provides an example that illustrates the hardware connections and software driver for a stepper mot

    • PDF
    • Rev 1
    • Feb 25, 2009
    • 522.1 KB
    • AN3817
    • English

  • Stepper Motor Motion Control Driver for MC9S08LG32

    The MC9S08LG32 is a member of the NXP® HCS08 family of MCUs. It uses the S08 core and integrates abundant peripherals, such as LCD, TPM, SPI, I2C, SCI, and ADC. This application note describes the stepper motor motion control driver using TPM (Timer/PWM) in software that allows you to control the stepper motor motion.

    • PDF
    • Rev 0
    • Feb 25, 2009
    • 425.5 KB
    • AN3828
    • English
    • Associated File: AN3828SW

  • Emulated EEPROM Implementation in Dual Flash Architecture and Demo Description on MC9S08LG32

    The flash memory on the MC9S08LG32 is intended primarily for program storage. In-circuit programming allows the operating program to be loaded into the flash memory after final assembly of the application product. It is possible to program the entire array through the single-wire background debug interface. Because no special voltages are needed for flash erase and programming operations, in-application programming is also possible through other software-controlled communication paths.

    • PDF
    • Rev 0
    • Feb 25, 2009
    • 218.9 KB
    • AN3822
    • English

  • EEPROM Emulation Driver for MC9S08LG32

    The MC9S08LG32 is a member of the NXP HCS08 family MCUs. It uses the S08 core and integrates many peripherals, such as LCD, SPI, IIC, SCI, and ADC. This document is the note of the EEPROM emulation driver for the MC9S08LG32 microcontroller family.

    • PDF
    • Rev 0
    • Feb 25, 2009
    • 106.8 KB
    • AN3824
    • English
    • Associated File: AN3824SW

User Guide  ( 1 )

Quick Reference Guide  ( 1 )

  • DEMO9S08LG32 - Quick Reference Guide

    DEMO9S08LG32 is a cost-effective board targeting quick microcontroller evaluation. The MC9S08LG32 device is a 5V NXP microcontroller with an integrated liquid crystal display (LCD) driver for automotive and industrial applications.

    • PDF
    • Rev 0
    • Apr 17, 2009
    • 346.2 KB
    • MC9S08LG32QSG
    • English

Design Resources

Design Tools & Files  ( 1 )

Printed Circuit Boards and Schematics  ( 1 )

Software

Embedded Software  ( 2 )

BSP, Drivers and Middleware  ( 2 )

Development Software  ( 1 )

IDE and Build Tools  ( 1 )