NX3P1108UK: Logic controlled high-side power switch

Overview

The NX3P1108 is a high-side load switch which features a low ON resistance P-channel MOSFET that supports more than 1.5 A of continuous current. It has an integrated output discharge resistor to discharge the output capacitance when disabled. Designed for operation from 0.9 V to 3.6 V, it is used in power domain isolation applications to reduce power dissipation and extend battery life. The enable logic includes integrated logic level translation making the device compatible with lower voltage processors and controllers. The NX3P1108 is ideal for portable, battery operated applications due to low ground current and ultra-low OFF-state current.

MoreLess

Features

Wide supply voltage range from 0.9 V to 3.6 V
Very low ON resistance:
- 34 mΩ at a supply voltage of 3.3 V
High noise immunity
Low OFF-state leakage current (2.0 μA maximum)
1.2 V control logic at a supply voltage of 3.6 V
High current handling capability (1.5 A continuous current)
Internal output discharge resistor
Turn-on slew rate limiting
ESD protection:
- HBM JESD22-A114F Class 3A exceeds 4000 V
- CDM AEC-Q100-011 revision B exceeds 500 V
Specified from -40 °C to +85 °C

Target Applications

Cell phone
Digital cameras and audio devices
Portable and battery-powered equipment

MoreLess

Features

Wide supply voltage range from 0.9 V to 3.6 V
Very low ON resistance:
- 34 mΩ at a supply voltage of 3.3 V
High noise immunity
Low OFF-state leakage current (2.0 μA maximum)
1.2 V control logic at a supply voltage of 3.6 V
High current handling capability (1.5 A continuous current)
Internal output discharge resistor
Turn-on slew rate limiting
ESD protection:
- HBM JESD22-A114F Class 3A exceeds 4000 V
- CDM AEC-Q100-011 revision B exceeds 500 V
Specified from -40 °C to +85 °C

Target Applications

Cell phone
Digital cameras and audio devices
Portable and battery-powered equipment

NX3P1108 Block Diagram

NX3P1108 Block Diagram

NX3P1108 Block Diagram

Previous Next