Motorcycle Engine Control Unit (ECU) and Small Engine Control

Overview

Category Products Features
System in Package (SiP)
S12XS MCU Plus Ignition and Injector Driver SiP Engine control IC combining an MCU (S12XS) and analog control die (MC33812)
Integrated S12P Microcontrollers (MCUs) with Ignition and Injector Driver Engine control IC combining an MCU (S12P) and analog control die (MC33812)
Microcontrollers (MCU)
Ultra-Reliable KEA Automotive Microcontrollers (MCUs) based on Arm® Cortex®-M0+ Core 32-bit ARM®-based MCUs, up to 128K Flash and up to 16K RAM
Ultra-Reliable S12XE High-Performance Automotive and Industrial Microcontrollers 16-bit automotive microcontroller scalable to 1MB
S12XS Automotive and Industrial Microcontrollers (MCUs) 16-bit automotive microcontroller
S12P Automotive and Industrial Microcontrollers (MCUs) Low-cost 16-bit automotive microcontroller
32-bit Automotive General Purpose Microcontrollers Scalable family of AEC-Q100 qualified 32-bit ARM Cortex-M4F and Cortex-M0+ based MCUs
Small Engine Analog Mixed Signal
Two Cylinder Small Engine Control IC Two Cylinder Small Engine Control IC
One Cylinder Small Engine Control IC One Cylinder Small Engine Control IC
Multifunctional Ignition and Injector Driver Multifunctional Ignition and Injector Driver 1-cyl
Automotive Engine Control IC 4 LS gate drivers suitable for solenoids, injectors
Engine Control Integrated Circuit Multifunction engine control output and driver IC
Motor driver/H-Bridge
H-Bridge, Brushed DC Motor Driver, 5-28V, 5A, 11kHz Monolithic H-bridge power IC in a robust, thermally enhanced package
H-Bridge, Brushed DC Motor Driver, 5-28V, 5A, 20kHz Monolithic H-Bridge power IC designed primarily for automotive electronic throttle control, but is also applicable to many low-voltage DC servo motor control applications
Configurable Octal Serial Switch Eight independent configurable switches to drive stepper motor
SPI Programmable 10A H-Bridge Brushed DC Motor Driver Programmable H-Bridge driver
H-Bridge, Brushed DC Motor Driver, 5-28V, 5A, 10kHz 5.0 A H-Bridge for Motor Drive
H-Bridge, Brushed DC Motor Driver, 5-28V, 5A, 10kHz 5.0 A H-Bridge for Motor Drive
H-Bridge Motor Driver, 5-28V, 5A, 11kHz Dual H-Bridge with PWM capability
Programmable Solenoid Controller Gate Driver Six microcores, seven external MOSFET high-side pre-drivers, and eight external MOSFET low-side pre-drivers
SPI Programmable 10A H-Bridge Brushed DC Motor Driver Designed using ISO 26262 processes in support of ASIL level C and D system qualification; 235 mΩ maximum RDS(on) per integrated MOSFET
MAP Sensor
20 to 200kPa, Absolute, Integrated Pressure Sensor Small form factor and reliability of on–chip integration