-
TWR-KM35Z75M
Active -
KM Series Tower System Module for KM35 MCUs.
TWR-KM35Z75M Tower System module
- Quick Start Guide
- USB Cable
KM Series Tower System Module for KM35 MCUs
The TWR-KM35Z75M board is designed to work either in standalone mode or as part of the Tower® System, a modular development board platform that enables rapid prototyping and tool re-use through reconfigurable hardware. Begin constructing your Tower System evaluation board platform today by visiting Tower® System Modular Development Board Platform for additional Tower System boards and compatible peripherals.
Product Details
Supported Devices
Processors and Microcontrollers
KM Series Arm Cortex-M0+
- KM3x: 50–75 MHz Precision Metrology MCUs with Segment LCDs Based on Arm® Cortex®-M0+
Features
Microcontroller
- 75 MHz
- 512 KB Flash
- 64 KB RAM
- low power MCU
- LQFP144 package
- Tower®-compatible microcontroller module
KM35Z512VLQ7 MCU
Connectivity
- USB interface with mini-B USB connector
- Headers for direct GPIO and ADC access
- General-purpose tower plug-in (TWRPI) socket
- External tamper pins
Power Management
- Independent, battery-operated power supply for real-time clock (RTC) and tamper detection modules
Debug
- On-board debug circuit: Open-source SWD (OpenSDA) with virtual serial port
Sensors
- Three-axis accelerometer/anti tamper tilt sensor (MMA8451Q)
- NTC temperature sensor
Display
- Large 160-segment glass LCD
Support
- IrDA support
User Components
- Three user-controllable LEDs
- Two user push-button switches for GPIO interrupts
- One user push-button switch for tamper detection
- One user push-button switch for MCU reset
- Potentiometer
Buy Options
Design Resources
Software
Quick reference to our software types.
2 software files
-
Debugging and Visualization Tools
LinkServer for Microcontrollers
-
Development IDEs and Build Tools
MCUXpresso Integrated Development Environment (IDE)
Note: For better experience, software downloads are recommended on desktop.
Training
2 trainings