S12VR: S12VR Mixed-Signal MCU for Automotive & Industrial Relay Based Motor Control
S12VR Microcontroller Block Diagram
S12 MagniV Microcontrollers for Automotive Applications
NXP Doubles Portfolio of MagniV Microcontrollers
-
S12VR Microcontroller Block Diagram -
S12 MagniV Microcontrollers for Automotive Applications -
NXP Doubles Portfolio of MagniV Microcontrollers
S12VR Microcontroller Block Diagram
Development Boards and Designs
.
Target Applications
Automotive
Industrial
- 3-Phase AC Induction Motor
- Air Conditioning (AC)
- Brushless DC Motor (BLDC) Control
- Building Safety
- Electricity Grid and Distribution
- Gas Meter
- Heat Metering
- Motion Control and Robotics
- Motor Drives
- Permanent Magnet Synchronous Motor (PMSM)
- Smart Power Socket and Light Switch
- Water Meter
Mobile
Smart Home
Complementary products for your application
Other Recommended Products
Similar Products
S12VR Package and Feature Options
| Product Family | S12VR | |||||
|---|---|---|---|---|---|---|
| Part Name | S12VR16 | S12VR32 | S12VR48 | S12VR64 | S12VRP48 | S12VRP64 |
| Package | 32 LQFP | - | ||||
| - | 48 LQFP | |||||
| Flash Memory k Byte (ECC) | 16 kB | 32 kB | 48 kB | 64 kB | 48 kB | 64 kB |
| EEPROM (ECC) | 128 Bytes | 512 Bytes | 2kB D-Flash | 4kB D-Flash | ||
| RAM k Byte | 2 kB | 6 kB | ||||
| LIN physical layer | 1 | - | ||||
| SPI | - | 1 | - | |||
| SCI | 1 | 2 | ||||
| Timer | 4ch x 16-bit | 2ch + 2ch (16-bit) | ||||
| PWM channels | 8ch x 8-bit or 4ch x 16-bit | |||||
| 10 Bit ADC Channels | 2 ( +HVI ) | 6 ( + HVI ) | ||||
| Current Sensing (Op Amp) | - | 1ch (3 analog pins) | ||||
| Low Side Drivers (relay driver) | 2 (protected for inductive loads) | |||||
| Low Side Driver (general) | - | 1 | ||||
| High Side Drivers | 1 | 2 | ||||
| High voltage Inputs | 4 | 6 | ||||
| General Purpose I/Os (5V) | 16 | 28 | ||||
| Supply voltage sense | 1 | |||||
| EVDD output pin (5V/20mA) | 1 (overcurrent protected, eg. for hall sensor supply) | |||||
| PGPIO output pin (5V/20mA) | - | 1 (driving LL-FET) | ||||
| Stronger GPIO pin (5V/10mA) | 2 | 1 | ||||