Braking and Stability Control

Overview

Reference Designs

Interactive Block Diagram

Click on the diagram below to see recommended products.

Braking and Stability Control Application Block Diagram

Block Diagram

Block Diagram
Category Products Features
Valve 2/3 Channel LS/Switch
MC33810: Automotive Engine Control IC Eight channel output driver IC .
MC33882: 6 Output Switch, SPI, Parallel Input Control Six channel output driver IC
Microcontrollers (MCUs)
MPC574xP: Ultra-Reliable MPC574xP MCU for Automotive & Industrial Safety Applications Main 32-bit MCU for data processing, dual-core.
MPC560xP: Ultra-Reliable MPC560xP MCU for Automotive & Industrial Safety Applications Main Single-core MCU for data processing and algorithms
MPC564xL: Ultra-Reliable Dual-Core 32-bit MCU for Automotive and Industrial Applications Main Dual-core MCU for data processing and algorithms
MPC560xB: Ultra-Reliable MPC56xB MCU for Automotive & Industrial General Purpose Main Single-core MCU for data processing and algorithms
Acceleration Sensor
MMA69xxKQ: SPI ±3.5g or ±5.0g XY-Axis, Low-g, Digital Inertial Sensor Dual-axis digital output acceleration sensor.
Motor Drivers
MC33931: H-Bridge, Brushed DC Motor Driver, 5-28V, 5A, 11kHz H-Bridge with PWM capability.
MC33926: H-Bridge, Brushed DC Motor Driver, 5-28V, 5A, 20kHz H-Bridge with slew rate control and PWM capability
HB2000: SPI Programmable 10A H-Bridge Brushed DC Motor Driver NXP's new advanced H-Bridge Motor Driver family SPI programmable, multi-packages, ISO26262 ASIL B/D certified with 120 mohm typical RDS(ON) for high safety applications.
HB2001: SPI Programmable 10A H-Bridge Brushed DC Motor Driver NXP's new advanced H-Bridge Motor Driver family SPI programmable, multiple packages, ISO26262 ASIL B/D certified with 65 mohm typical RDS(ON) for high safety applications.
MC33937: 3 Phase Field Effect Transistor Pre-driver The NXP® MC33937A is a Field Effect Transistor (FET) pre-driver designed for three phase motor control and similar applications.
GD3000: 3-Phase Brushless Motor Pre-Driver Three-phase MOSFET gate driver IC for driving BLDC motors used in fans and pumps, HVQFN package.
Power Supply and Physical Interface
MC33907: Safe System Basis Chip DC/DC up to 800 mA Safe System Basis Chip with Buck and Boost DC/DC up to 800mA.
MC33908: Safe System Basis Chip with Buck and Boost DC/DC up to 1.5A on Vcore Safe System Basis Chip with Buck and Boost DC/DC up to 1.5A
MC33662: LIN 2.1 / SAEJ2602-2, LIN Physical Layer System basis chips (SBC)
MC33742: SBC with Enhanced High-Speed CAN Transceiver System basis chips (SBC)
MC33903: SBC Gen2 with High-Speed CAN and LIN System basis chips (SBC)
MC33904: System Basis Chip Gen2 with High Speed CAN System basis chips (SBC)
MC33905: SBC Gen2 with High-Speed CAN and LIN System basis chips (SBC)
FailSafe HS Switch
MC12XS2: 12V Multipurpose Low RDSON eXtreme Switch Very low RDSON devices in single or dual high side configuration.
Sensor Signal Conditioning Circuit
MMA2201: ±40g, Medium-g, Analog Accelerometer Wheel speed sensor interface, acceleration sensor.
MMA2204: ±100g, ±80g, Medium-g, Analog Accelerometer Wheel speed sensor interface, acceleration sensor
Watchdog Microcontrollers (MCU)
S32S24: Safety Microcontroller for Automotive Applications Four Arm® cores in lock step (8 in total) at 800 MHz, flash memory of up to 64 MB, OTA capabilities, ASIL-D and Hardware Security Engine. Ideal for vehicle dynamics apps.
S12XS: S12XS Automotive and Industrial Microcontrollers (MCUs) Safety companion controller for redundancey and watchdog functions.
S12P: S12P Automotive and Industrial Microcontrollers (MCUs) Safety companion controller for redundancey and watchdog functions
S08SG: 8-bit Small Package SG MCUs Safety companion controller for redundancy and watchdog functions