i.MX RT Industrial Drive Development Platform

  • Preproduction
  • This page contains information on a preproduction product. Specifications and information herein are subject to change without notice. For additional information contact support or your sales representative.

Roll over image to zoom in

Product Details

Block Diagram

Choose a diagram:

i.MX RT Industrial Drive Development Platform

i.MX RT Industrial Drive Development Platform

SW Architecture

i.MX RT Industrial Drive Development Platform platform overview

Supported Devices


I3C/I²C Digital Temp. Sensors


Secure CAN Transceivers

CAN Signal Improvement

Security and Authentication


Power Management

BLDC, H-Bridge, Stepper


Processors and Microcontrollers

i.MX RT Crossover MCUs


NFC Readers

Analog and Mixed Signal

Analog Front-End



  • 6468 CoreMark with Cortex-M7 up to 800 MHz + Arm Cortex-M4 up to 400 MHz
  • 2 MB SRAM with 512 KB of TCM for Cortex-M7 and 256 KB of TCM for Cortex-M4
  • Advanced security, including secure boot and crypto engines, and is part of the EdgeLock® Assurance program
  • 1 Gb ENET with TSN
  • Supported by MCUXpresso suite of software and tools


  • Supported by FreeMASTER, MCUXPresso SDK, IDE and configuration tools
  • Integrated motor control subsystem with high speed ADCs and Comparators, flexible multi-channel PWM outputs, Quadrature encoders/decoders, etc

Support Package

  • Schematics, layout, Gerbers, BOM, sample source code, user guide and video tutorial

Power Management

  • Highly flexible motor control; up to 4 motors can be controlled simultaneously
  • The NAFE 13388 provides a flexible interface and has over-voltage protection up
  • It can accurately read DC bus voltage, DC bus current and board temperature
  • The GD3000 interfaces to a MCU via six direct input control signals, a SPI port for device setup and asynchronous reset, enable and interrupt signals


  • Provides meaningful guidance and collateral to ease the IEC 62443-4-2 certification journey with NXP products
  • Ciphers and RNG, secure RTC, fuse and HAB
  • EdgeLock SE05X is Common Criteria EAL 6+ certified up to OS level as a safe environment to run preinstalled NXP IoT applets, supporting comprehensive encrypted communications and secured lifecycle management

Flexible Interface

  • USB, CAN, RS485, NFC compatible, Ethernet. Connector with expansion options for WiFi or Bluetooth


Quick reference to our documentation types.

5 documents

Design Resources

Select a section:


2 software files

  • BSPs and Device Drivers

    i.MX RT Industrial Drive Development Platform GitHub

  • BSPs and Device Drivers

    i.MX RT Industrial Drive Development Platform GitHub

Note: For better experience, software downloads are recommended on desktop.


7 trainings

Show All