Hardware
2 hardware offerings
-
Evaluation and Development BoardsLayerscape LS1012A Reference Design Board
-
Complete SolutionLayerscape LS1012A Smart Home Gateway Reference Design
3.3 V, Two Differential Channel, 2-1 Multiplexer/Demultiplexer Switch
CBTL02043A_CBTL02043B Receive alerts
CBTL02043A/B is a 2 differential channel, 2-to-1 multiplexer/demultiplexer switch for USB 3.1, PCI Express Generation 3, or other high-speed serial interface applications. The CBTL02043A/B can switch two differential signals to one of two locations. Using a design technique, NXP has minimized the impedance of the switch such that the attenuation observed through the switch is negligible, and also minimized the channel-to-channel skew as well as channel-to-channel crosstalk, as required by the high-speed serial interface. CBTL02043A/B allows expansion of existing high-speed ports for extremely low power.
The device's pinouts are optimized to match different application layouts. CBTL02043A has input and output pins on the opposite of the package, and is suitable for edge connector(s) with different signal sources on the motherboard. CBTL02043B has outputs on both sides of the package, and the device can be placed between two connectors to multiplex differential signals from a controller. Please refer to Section 8 for layout examples.
Outline 3d SOT764-1
Product Details
Block Diagram
Features
Key Features
- 2 bidirectional differential channel, 2 : 1 multiplexer/demultiplexer
- High-speed signal switching for PCIe Gen3 8 Gbit/s
- High bandwidth: 10 GHz at -3 dB
- Low return loss: -13.5 dB at 4 GHz
- Low crosstalk: -35 dB at 4 GHz
- Low off-state isolation: -20 dB at 4 GHz
- Low intra-pair skew: 5 ps typical
- Low inter-pair skew: 35 ps maximum
- VDD operating range: 3.3 V ±10 %
- Shutdown pin (XSD) for power-saving mode
- Standby current less than 1 µA
- DHVQFN20 package
Low Insertion Loss
- -0.5 dB at 100 MHz
- -1.3 dB at 4.0 GHz
ESD Tolerance
- 2000 V HBM
- 1000 V CDM
Routing of High-speed Differential Signals with Low Signal Attenuation
- PCIe Gen3
- DisplayPort 1.2
- USB 3.1
- SATA 6 Gbit/s
Documentation
Quick reference to our documentation types.
Design Resources
Engineering Services
To get further assistance directly from NXP, please see our Engineering Services.
1 engineering service
-
Independent Design House (IDH)
Mobile applications development
To find a complete list of our partners that support this product, please see our Partner Marketplace.