Connected Radio

i.MX 6 Series Applications Processors: Multicore, Arm^® Cortex^®-A7 Core, Cortex-A9 Core, Cortex-M4 Core

i.MX6SX
Active

The i.MX 6SoloX processor utilizes both Arm Cortex-A9 and Cortex-M4 cores to enable secure, connected homes and vehicles within the IoT.
- Data Sheet:
- PDF
i.MX6UL
Active

The i.MX 6UltraLite is a high-performance, ultra-efficient processor family featuring NXP's advanced implementation of a single Arm Cortex-A7 core, operating at speeds up to 528 MHz. The i.MX 6UltraLite applications processor includes an integrated power management module, reducing the complexity of external power supply and simplifying power sequencing.
- Data Sheet:
- PDF

General Purpose I/O (GPIO)

PCAL9714
Active

I2C-bus GPIO expander with temperature sensor, LED dimming and interrupt output for industrial and automotive applications
- Data Sheet:
- PDF
PCAL9722
Active

The PCAL9722 is an ultra-low voltage 22-bit I/O expander and translator with SPI interface and Agile I/O features to enable flexible designs and expanded capabilities for MCU and MPU applications.
- Data Sheet:
- HTML
- PDF

Car Audio Amplifiers

TDF8541
Active

High-performance 4-channel car audio amplifier delivers 45W per channel with I2C control, diagnostics and protection features for premium sound systems

Radio

SAF9000
Preproduction

Complete radio and audio processing solution integrates FM receiver, DSP core, and embedded memory for seamless broadcast reception and playback
SAF4000
Active

The SAF4000 is a fully integrated software defined wideband radio solution capable of covering all global broadcast audio standards.

Audio Amplifiers

MC_55974

NXP’s Car Radio includes Class-AB and Class-D amplifiers offering excellent signal to noise performance and sound quality for automotive head units and infotainment.

No Longer Manufactured

TLH501x
EOL

NXP's highly integrated solution for AM/FM/DAB low noise active antenna amplifier improves reception performance for car infotainement radio systems. Archived content is no longer updated and is made available for historical reference only.

Lighting Driver and Controller ICs

MC_71502

NXP's ASL2416SHN is a two channel buck mode LED driver IC is a cost effective design solution, targeting automotive exterior and interior lighting applications.

Audio

MC_53499

NXP provides high-quality audio conversion solutions (ADCs, CODECs, DACs) using advanced CMOS and BiCMOS manufacturing processes for professional and consumer systems

High Speed CAN with Flexible Data Rate (CAN FD)

TJA144x
Active

The TJA144x CAN FD transceiver family consists out of Basic- Standby- Dual Standby and Sleep Mode CAN transceivers, offering CAN FD data rates up to 5 MBit/s, fully compliant to ISO 11898-2 (2016), SAE J2284-1 to -5, SAE J1939-14 and VeLIO and is available in AEC-Q100 grade-1 and grade-0.
- Data Sheet:
- PDF

3.3 V / 5 V IO CAN Transceivers

TJA1044
Active

NXP's TJA1044 is a high-speed CAN transceiver with standby mode. It is designed for high-speed CAN automotive applications.
- Data Sheet:
- PDF

Interfaces

MC_53488

Automotive LIN Solutions offer a complete and versatile range of LIN automotive products including single, dual, quad LIN transceivers and LIN mini System Basis Chips

24 V CAN Transceivers

TJA1043
Active

NXP's TJA1043 is a High-Speed CAN transceiver with fail-safe and diagnostic features that offer enhanced system reliability and advanced power management.
- Data Sheet:
- PDF

CAN Signal Improvement Capability (SIC)

TJA1463
Active

The TJA1463 CAN transceiver with Sleep Mode is part of the TJA146x Transceiver family that implements CAN Signal Improvement Capability (SIC) as defined in CiA 601-4.
- Data Sheet:
- PDF

5 V PMIC Solutions

MMPF0100
Active

The NXP MMPF0100 PMIC features integrated full system-level power management ideally suited to the i.MX 6 series of application processors.
- Data Sheet:
- PDF
PF8101-PF8201
Active

The PF8101/PF8201 is a PMIC for high performance i.MX8 applications, featuring 5 buck converters and 3 LDO regulators for system power generation.
- Data Sheet:
- PDF
PF0300
Preproduction

The PF0300 is NXP’s multi-channel PMIC device designed to be used for automotive and industrial radio application. The PF0300 is also highly configurable making it a great companion and fit for various system level power requirements.
PF7100
Active

The PF7100 is a PMIC for high performance i.MX8 applications, featuring 5 buck converters and 2 LDO regulators for system power generation.
- Data Sheet:
- PDF
PF5024
Active

The PF5024 is NXP’s multi-channel, highly configurable PMIC device designed for high performance automotive and industrial applications.
- Data Sheet:
- PDF
PF5020
Active

The PF5020 is NXP’s multi-channel, highly configurable PMIC device designed for high performance automotive and industrial applications.
- Data Sheet:
- PDF
PF81-PF82
Active

The NXP's PF81 and PF82 is a new generation of power management integrated circuit (PMIC) specifically developed to support the i.MX 8 and i.MX 8X families
- Data Sheet:
- PDF

12 V, 24 V, and 48 V SBC Solutions

VR5500
Active

The NXP VR5500 is an automotive high voltage PMIC with multiple switch mode and linear voltage regulators designed for Radio, V2X and Infotainment applications
- Data Sheet:
- PDF
VR5510
Active

The VR5510 is NXP’s multi-channel, highly voltage PMIC device designed for high performance automotive and industrial applications.
- Data Sheet:
- HTML
- PDF
FS5600
Active

The FS5600 NXP's functional safety PMIC combines two DC-DC converters, watchdog and voltage monitors which make it fit in a wide range of applications.
- Data Sheet:
- HTML
- PDF

Products

SNSHOME

NXP’s Sensor solutions include a breadth of accelerometers, gyroscopes, magneto-resistive and pressure solutions covering different performance, sensing ranges

Connected NFC Tags

NCx3310
Active

Dual high-speed CAN transceiver delivers reliable automotive networking and EMC performance with integrated termination and wake features

Wi-Fi^® + Bluetooth^® + 802.15.4

88Q9098

The 88Q9098 family of automotive wireless SoCs is the industry's first Wi-Fi 6 solution, based on IEEE 802.11ax standards, with concurrent Bluetooth operation.

Support

SW-SUPPORT

NXP Design Services can help you develop superior products through every phase of development, assuring the quality of your products and the satisfaction of your customers

Embedded Software

IMX-SW

Market-focused development software based on the i.MX RT, 6, 7, and 8 series processors.

Software Development Resources

PREMIUM-SUPPORT

NXP offers a portfolio of products and solutions that support your design cycle form start to finish. During your software development cycle the support team at NXP is here to help. Accelerate your design cycle by utilizing the NXP premium support team today

Automotive Ethernet PHY Transceivers

TJA1104
Active

Automotive Ethernet PHY transceiver with sleep mode enables reliable in-vehicle networking up to 100 Mbit/s for safety-critical applications
TJA1102A
Active

TJA1102A (TJA1102A / S) is a revision of the successful TJA1102 (TJA1102S). The high performance, dual- or single-port automotive Ethernet PHY is compliant to IEEE 100BASE-T1.
TJA1103
Active

CAN FD and CAN signal improvement transceiver for automotive networks, offering EMC robustness and low power modes for partial networking
TJA1101
Active

TJA1101B is the revision of the successful TJA1101A. The high performance, single port automotive Ethernet PHY is compliant to IEEE 100BASE-T1.
- Data Sheet:
- PDF
TJA1120
Active

TJA1120, the robust 1000BASE-T1 PHY for Automotive Ethernet use cases, developed according to ISO26262 ASIL B, supports shieled (STP) and unshielded (UTP) twisted pair cable applications.

Connected NFC Tags

NCx3310
Active

Dual high-speed CAN transceiver delivers reliable automotive networking and EMC performance with integrated termination and wake features

Automotive LIN Solutions

TJA1128
Active

NXP's TJA1128 is a LIN Mini System Basis Chip (SBC) with a LIN transceiver designed for automotive applications that require in-vehicle networking.
- Data Sheet:
- PDF

Connected Radio

Application Details

Interactive Block Diagram

Block Diagram

Connected Radio

i.MX 6 Series Applications Processors: Multicore, Arm® Cortex®-A7 Core, Cortex-A9 Core, Cortex-M4 Core

General Purpose I/O (GPIO)

Car Audio Amplifiers

Radio

Audio Amplifiers

No Longer Manufactured

Lighting Driver and Controller ICs

Audio

High Speed CAN with Flexible Data Rate (CAN FD)

3.3 V / 5 V IO CAN Transceivers

Interfaces

24 V CAN Transceivers

CAN Signal Improvement Capability (SIC)

5 V PMIC Solutions

12 V, 24 V, and 48 V SBC Solutions

Products

Connected NFC Tags

Wi-Fi® + Bluetooth® + 802.15.4

Support

Embedded Software

Software Development Resources

Automotive Ethernet PHY Transceivers

Connected NFC Tags

Automotive LIN Solutions

Design Resources

Software

Filter by

Filter By

Training

Filter by

Support

What do you need help with?

Suggested Links

i.MX 6 Series Applications Processors: Multicore, Arm^® Cortex^®-A7 Core, Cortex-A9 Core, Cortex-M4 Core

Wi-Fi^® + Bluetooth^® + 802.15.4