MTRCKTSPS5744P: MPC5744P Development Kit for 3-phase PMSM

Overview

MTRCKTSPS5744P-BD
MTRCKTSPS5744P-BD

MTRCKTSPS5744P-BD  

Introducing MPC5744P Motor Control Development Kit

Introducing MPC5744P Motor Control Development Kit  

Specifications

Supported Devices

Interfaces

  • MC33905 : SBC Gen2 with High-Speed CAN and LIN

Power Management

  • MC33937 : 3-Phase Field Effect Transistor Pre-driver

Processors and Microcontrollers

Ultra-Reliable MPC57xx MCUs
  • MPC574xP : Ultra-Reliable MPC574xP MCU for Automotive & Industrial Safety Applications

MoreLess

Technical and Functional Specifications

Microcontroller (MCU)
32-bit Power Architecture® based MPC5744P ultra-reliable MCU
Transistors
MC33937: 3 Phase Field Effect Transistor Pre-driver
System Basis Chip (SBC)
FS6500: Grade 1 and Grade 0 safety power SBC
Functional
DC-bus overvoltage, overcurrent, and under-voltage and stall fault detection
Connectors
JTAG and NEXUS debug connector
Power
 Supports low-voltage PMSM motors with a resolver position sensor
Software enablement
  • ANSI-C based example SW created in S32 Design Studio for Power Architecture®
  • FreeMASTER visualization/configuration support
  • MCAT tool 1.1 part of software package

Buy

  • MTRCKTSPS5744P   Active

  • MPC5744P Development Kit for 3-phase PMSM
    • MPC5744P controller board
    • MC33937A power stage based on SMARTMOS pre-driver
    • 3-phase PMSM low-voltage motor
    • AC/DC 24 V universal power supply
    • USB cable
    • 1 @ US
    • $1999.00
      • Use Coupon
      • Distributor

        • Don't have an NXP coupon? You can purchase this product from one of our authorized distributors.

MTRCKTSPS5744P-Image
1579109330588723448640

Design Resources

Get Started

Documents   ( 5 )

Design Resources   ( 4 )

Software   ( 1 )

Documents

Application Note  ( 1 )

  • AN12017: 3-Phase PMSM Development Kit with MPC5744P – Application Note

    Describing the design of a 3-phase Permanent Magnet Synchronous Motor (PMSM) vector control drive with 3-shunt current sensing and resolver position sensing. The design targets automotive motor control (MC) applications. The proposed design exhibits the suitability and advantages of the MPC5744P MCU for motor control applications. It serves as an example of a PMSM control design using the NXP 32-bit MCU built on the Power Architecture™ technology. It meets the highest functional safety standards for automotive and industrial applications.

    • PDF
    • Rev 1
    • Aug 30, 2018
    • 11.9 MB
    • AN12017
    • English
    • Associated File: AN12017SW

User Guide  ( 3 )

Fact Sheet  ( 1 )

Design Resources

Design Tools & Files  ( 4 )

Printed Circuit Boards and Schematics  ( 4 )

Software

Embedded Application Software  ( 1 )

Embedded Application Software - miscellaneous  ( 1 )

Get Help