FRDM-KL03Z: Freedom Development Platform for Kinetis® KL03 MCUs

Overview

Freedom Development Platform for KL03 MCUs Block Diagram
Freedom Development Platform for KL03 MCUs Block Diagram

FRDM-KL03Z Freedom Development Platform  

MCU Minutes | MCUXpresso Software and Tools Overview

MCU Minutes | MCUXpresso Software and Tools Overview  

Specifications

Supported Devices

Processors and Microcontrollers

KL Series Cortex-M0+
  • KL0x : Kinetis® KL0x-48 MHz, Entry-Level Ultra-Low Power Microcontrollers (MCUs) based on Arm® Cortex®-M0+ Core

MoreLess

Technical and Functional Specifications

Microcontroller

MKL03Z32VFK4 MCU

  • 48 MHz
  • 32 kB Flash
  • 2 KB SRAM
  • 24 QFN
Connectivity
  • Form factor compatible with Arduino® Rev3 pin layout
  • Easy access to MCU I/O
Power Management
  • Flexible power supply options – USB, coin cell battery, external source
  • Battery-ready, power-measurement access points
Debug

New, OpenSDA debug interface

  • Mass storage device flash programming interface (default)– no tool installation required to evaluate demo apps
  • P&E Debug interface provides run-control debugging and compatibility with IDE tools
  • CMSIS-DAP interface: new Arm standard for embedded debug interface
Sensors
  • MMA8451Q accelerometer
  • Thermistor sensor to measuring temperature
  • Capacitive touch slider
Components
  • tri-color LED
  • Two (2) user pushbutton switches for NMI interrupts and LLWU wake-up (SW2/SW3)

Buy

  • FRDM-KL03Z   Active

  • Freedom Development Board for Kinetis KL03 MCUs
    • FRDM-KL03Z hardware
    • Quick Reference Card
    • Additional hardware required: USB A-to-MiniB cable (not included)
    • FRDM-KL03Z
    • 1 @ US
    • $20.00
    • Use Coupon
    • Distributor

    Don't have an NXP coupon? You can purchase this product from one of our authorized distributors.

1579109330588723448640

Design Resources

Get Started

Documents   ( 7 )

Software   ( 8 )

Documents

User Guide  ( 5 )

  • FRDM-KL03Z User’s Guide

    The Freedom development platform is a set of software and hardware tools for evaluation and development. It is ideal for rapid prototyping of microcontroller-based applications. The NXP Freedom KL03Z hardware, FRDM-KL03Z, is a simple, yet sophisticated design featuring a Kinetis L series microcontroller, built on the Arm® Cortex™-M0+ core.

    • PDF
    • Rev 0
    • Jul 11, 2014
    • 2.4 MB
    • FRDMKL03ZUG
    • English

  • Kinetis blhost User's Guide

    This document describes the usage of the blhost PC application. The blhost application is used on a host computer to issue commands to an NXP platform running an implementation of the Kinetis bootloader. The blhost application, in conjuction with the Kinetis bootloader, allows a user to program a firmware application onto the Kinetis device without a programming tool.

    • PDF
    • Rev 3
    • Apr 24, 2016
    • 310.7 KB
    • KBLHOSTUG
    • English

  • OpenSDA

    User’s Guide for the OpenSDA embedded serial and debug adapter.

    • PDF
    • Rev 0.94
    • Sep 18, 2012
    • 1.0 MB
    • OPENSDAUG
    • English

  • Getting Started with the Kinetis ROM Bootloader - KBTLDRUG

    This document describes how to interface with the Kinetis ROM-based bootloader to program a user application image into the on-chip flash. The Kinetis bootloader application resides in the Kinetis ROM and enables flash programming without the need for a debugger.

    • PDF
    • Rev 2
    • Apr 24, 2016
    • 467.2 KB
    • KBTLDRUG
    • English

  • Get Started with the FRDM-KL03Z

    This page will help guide you through the process of learning about your FRDM-KL03Z board.

    • HTML
    • Mar 26, 2019
    • NGS-FRDM-KL03Z
    • English

Release Notes  ( 1 )

  • KSDKKL03RN

    These are the release notes for the 1.0.0 version of the NXP Freedom FRDM-KL03Z platform, based on Kinetis SDK (KSDK) 1.0.0. The core of the Kinetis SDK is a set of peripheral drivers built in two layers: the Hardware Abstraction Layer (HAL) and the Peripheral Driver layer.

    • PDF
    • Rev 1.0.0
    • Sep 6, 2014
    • 461.3 KB
    • KSDKKL03RN
    • English

Selector Guide  ( 1 )

Software

Embedded Software  ( 5 )

BSP, Drivers and Middleware  ( 4 )

Libraries  ( 1 )

  • Touch-Sensing Software

    Touch Sensing Software Suite enables any 8-bit S08 Microcontroller as a touch sensor, providing cost-effective and flexible solutions for human-machine interfaces.

    Download Options

Development Software  ( 3 )

IDE and Build Tools  ( 2 )

Code Generation Tools  ( 1 )

Get Help

MCUXpresso Software and Tools

MCUXpresso