GreenChip Synchronous Rectifier Controller

TEA1998TS

Roll over image to zoom in

The TEA1998TS is a member of a new generation of Synchronous Rectifier (SR) controller ICs for switched mode power supplies with adaptive gate drive for maximum efficiency at any load.

The TEA1998TS is a dedicated controller IC for synchronous rectification on the secondary side of flyback converters. It incorporates the sensing stage and driver stage for driving the SR MOSFET, which is rectifying the output of the secondary transformer winding.

The TEA1998TS can generate its own supply voltage for battery charging applications with low output voltage or for applications with high-side rectification.

The TEA1998TS is fabricated in a Silicon-On-Insulator (SOI) process.

Product Details

Select a section:

Block Diagram

TEA1998TS Block Diagram

TEA1998TS Block Diagram
Get diagram PDF

Features

Efficiency

  • Adaptive gate drive for maximum efficiency at any load
  • Typical supply current in no-load operation below 250 µA

Application

  • Operates in an output voltage range between 10 V and 0 V
  • Drain sense pin capable of handling input voltages up to 60 V
  • Self-supplying for operation with low output voltage
  • Self-supplying for high-side rectification without the use of an auxiliary winding
  • Operates with standard and logic level SR MOSFETs
  • Supports USB BC, QuickCharge and smart charging applications
  • TSOP6 package

Control

  • Adaptive gate drive for fast turn-off at the end of conduction
  • UnderVoltage LockOut (UVLO) with active gate pull-down

NXP GreenChip

  • This product is part of the NXP GreenChip portfolio, this program optimizes for energy efficiency in mobile and computing applications, specializing in high-power density, safety and reliability.

Target Applications

The TEA1998TS is intended for flyback power supplies. In such applications, it can drive the external synchronous rectifier MOSFET, which replaces the diode for the rectification of the voltage on the secondary winding of the transformer.

It can be used in all power supplies that require a high efficiency, like:

  • Chargers
  • Adapters
  • Flyback power supplies with very low and/or variable output voltage

Documentation

Quick reference to our documentation types.

Filters

2 documents

Design Resources

Select a section:

Hardware

Filters

2 hardware offerings

Software

Filters

1 software file

Note: For better experience, software downloads are recommended on desktop.

Engineering Services

1 engineering service

To find a complete list of our partners that support this product, please see our Partner Marketplace.