Design Files
2 design files
-
Printed Circuit Boards and Schematics
Coin Cell Hardware Design Files.
-
Design Files - miscellaneous
JN-RD-6054-JN5189 Design Files
JN5189/88 (T): High-Performance and Ultra-Low-Power MCUs for Zigbee® and Thread with Built-In NFC Option
JN5189_88_T Receive alerts
The JN5189 portfolio is designed to power the next generation of very low current wireless devices, supporting Zigbee 3.0, Thread, and IEEE 802.15.4. It includes several low-power modes and ultra-low TX and RX power consumption, which enables devices powered by JN5189/88 to have a longer battery life. With -100 dBm RX sensitivity and up to +11 dBm TX output power, JN5189/88 offers reliable and robust communications performance.JN5189/88 is powered by an Arm® Cortex®-M4 MCU and can run up to 640 KB onboard flash and 152 KB SRAM, with enough room and flexibility for complex applications and OTA upgrade capability without external memory. It has a rich set of MCU peripherals and multiple serial communication interfaces for embedded connected applications. JN5189T/88T has an integrated NFC NTAG to implement contactless NFC commissioning, simplifying the network build-out.
Product Details
Features
CPU and Memory
- Up to 48 MHz Cortex-M4
- Up to 640 KB flash, up to 152 kB RAM, 128 KB ROM
- NFC NTAG Option with EEPROM
- Quad-SPI for execute in place or data storage in NVM
RF performance/power consumption
- -100 dBm RX sensitivity
- up to 11dBm TX power
- RX 4.3mA, DC/DC on at 3V
- TX 7.4mA @ 0dBm, 20.3mA @ 10dBm
- 2.4 GHz IEEE 802.15.4 compliant
Security
- AES256 with hardware protected key
- Hash engine (SHA256)
- Code readout protection
Digital and Analog Interfaces
- UART/SPI/I2C up to 2
- ISO7816 Interface for Secure Access Module
- 8 ch 12-bit ADC,
- 1 Analog comparator
- Digital Microphone Interface and Audio Event Detection
Clocks and timers
- 32 MHz and 32.768 kHz crystals
- Low and High Frequency Internal Clock sources
- 4 x general purpose timer
- 32K sleep timer
- Watchdog timer
- RTC with calibration
Operating Conditions
- Operating voltage: 1.9 to 3.6 V
- Junction Temperature range: -40 to 125 °C
Documentation
Quick reference to our documentation types.
1-5 of 27 documents
-
Application Note
Using the DC-DC Feature
-
Application Note
Zigbee 3.0 IoT Control Bridge Dynamic
-
Application Note
Customer Module Evaluation Tool
-
Application Note
Zigbee 3.0 Light Bulbs Dynamic
Design Resources
Hardware
5 hardware offerings
-
Evaluation and Development BoardsAdvanced Development Kit for JN5189/88Featured
-
Evaluation and Development BoardsJN5189 USB Dongle for Zigbee and Thread networkFeatured
-
Evaluation and Development BoardsAdvanced Development Kit for K32W061 and JN5189/88
-
Additional hardware available. View our featured partner solutions.
-
Evaluation and Development Boards
JN5189 Coin Cell Switch Reference Design
-
Evaluation and Development Boards
JN5189 Manufacturing package
Software
1-5 of 6 software files
-
BSP, Drivers and Middleware
MCUXpresso SDK - SDK Builder
-
BSP, Drivers and Middleware
MCUXpresso Config Tools - Pins, Clocks, Peripherals
-
Updates and Patches
JN-AN-1263 Bootloader Update
-
Additional software available. View our featured partner solutions.
-
IDE and Build Tools
MCUXpresso Integrated Development Environment (IDE)
-
Test, Debug and Analyzer Software
Kinetis Protocol Analyzer Adapter
Note: For better experience, software downloads are recommended on desktop.
Engineering Services
To get further assistance directly from NXP, please see our Engineering Services.
1 engineering service
-
Independent Design House (IDH)
Hardware/Software Engineering Services
To find a complete list of our partners that support this product, please see our Partner Marketplace.