FRDM-KL46Z: Freedom Development Platform for Kinetis^® KL3x and KL4x MCUs

Overview

The Freedom KL46Z is an ultra-low-cost development platform enabled by the Kinetis^® L series KL4x MCU family built on the Arm^® Cortex^®-M0+ processor.

Processor Expert^® component for low voltage H-Bridge products enables rapid embedded application development

MoreLess

Features

MKL46Z256VLL4MCU – 48 MHz, 256 KB flash, 32 KB SRAM, segment LCD, USB OTG (FS) , 100 LQFP
Capacitive touch slider, MMA8451Q accelerometer, MAG3110 magnetometer
Flexible power supply options – USB, coin cell battery, external source
Easy access to MCU I/O
Battery-ready, power-measurement access points
Form factor compatible with Arduino^™ R3 pin layout
OpenSDA debug interface
- Mass storage device flash programming interface (default) – no tool installation required to evaluate demo apps
- P&E debug interface provides run-control debugging and compatibility with IDE tools
- CMSIS-DAP interface: new Arm standard for embedded debug interface
- Refer to the FRDM-KL46Z user’s manual and OpenSDA user’s guide for more information

MoreLess

Features

MKL46Z256VLL4MCU – 48 MHz, 256 KB flash, 32 KB SRAM, segment LCD, USB OTG (FS) , 100 LQFP
Capacitive touch slider, MMA8451Q accelerometer, MAG3110 magnetometer
Flexible power supply options – USB, coin cell battery, external source
Easy access to MCU I/O
Battery-ready, power-measurement access points
Form factor compatible with Arduino^™ R3 pin layout
OpenSDA debug interface
- Mass storage device flash programming interface (default) – no tool installation required to evaluate demo apps
- P&E debug interface provides run-control debugging and compatibility with IDE tools
- CMSIS-DAP interface: new Arm standard for embedded debug interface
- Refer to the FRDM-KL46Z user’s manual and OpenSDA user’s guide for more information

Data Sheets

User Guide

Buy

FRDM-KL46Z board is Mbed Enabled

Freedom Development Platform for KL3x and KL4x MCUs Block Diagram

MCUXpresso Software and Tools Overview

FRDM-KL46Z board is Mbed Enabled
Freedom Development Platform for KL3x and KL4x MCUs Block Diagram
MCUXpresso Software and Tools Overview

FRDM-KL46Z board is Mbed Enabled

Freedom Development Platform for KL3x and KL4x MCUs Block Diagram

MCUXpresso Software and Tools Overview

Previous Next

Kit Contains

FRDM-KL46Z hardware
Quick reference card
Additional hardware required: USB A-to-MiniB cable (not included)

Supported Devices

KL3x: Kinetis^® KL3x-48 MHz, Segment LCD Ultra-Low-Power Microcontrollers (MCUs) based on Arm^® Cortex^®-M0+ Core
KL4x: Kinetis^® KL4x-48 MHz, USB, Segment LCD, Ultra-Low-Power Microcontrollers (MCUs) based on Arm^® Cortex^®-M0+ Core

Get Started

Get Started with the FRDM-KL46Z

Start Here! Getting Started on your FRDM-KL46Z

This page will help guide you through the process of learning about your FRDM-KL46Z board...

OpenSDA
User's Guide for the OpenSDA (open-standard serial and debug adapter) embedded on the FRDM-KL46Z
Type: Users Guide Format: pdf Size: 1.0 MB

FRDM-KL46Z Schematic
Reference schematics for the FRDM-KL46Z hardware design
Type: Schematics

FRDM-KL46Z Design Package
Reference Layout files for the FRDM-KL46Z hardware design.
Type: Printed Circuit Boards

FRDM-KL46Z: Freedom Development Platform for Kinetis® KL3x and KL4x MCUs

Overview

Features

FRDM-KL46Z board is Mbed Enabled

Freedom Development Platform for KL3x and KL4x MCUs Block Diagram

MCUXpresso Software and Tools Overview

FRDM-KL46Z board is Mbed Enabled

Freedom Development Platform for KL3x and KL4x MCUs Block Diagram

MCUXpresso Software and Tools Overview

Kit Contains

Supported Devices

Get Started

MCUXpresso Software and Tools

FRDM-KL46Z: Freedom Development Platform for Kinetis^® KL3x and KL4x MCUs