The RF Module for BSC9131 and BSC9132 based development platforms is a flexible architecture enabling Benetel to supplythe module configured to cover all of the major LTE dual frequency band combinations. In addition the module has a 3GPP WCDMA (HSPA+) 10dBm transceiver circuit making ita dual-mode solution.
The LTE circuit architecure is 2x2 MIMO.
Product number PSC913XRF13-0113 has a 13dBnm LTE output at each RF connector and operates in either Band 1 or Band 13 via software selection.
The RF module is designed for small cell applications with a JESD207 interface to the BSC913X SoC.
PSC913XRF13-0713 is an FDD RF module, which operates in LTE Band 7
and LTE Band 13. The Band 7 up-link is 250-2570 MHz and the
down-link is 2620-2690 MHz. The Band 13 up-link is 777-787 MHz and
the down-link is 746-756 MHz
2x2 LTE MIMO with an output power of 13 dBm on each port
Programmable through the SPI interface
Standard baseband connector used on all RF cards that is
compatible with NXP® BSC913X platform
JESD207 interface to the base-band
Dual-Band LTE operation with each band capable of 2x2 MIMO.
This is achieved by dedicating 2 RF receivers and 2 RF
transmitters to the LTE mode
Supports LTE bandwidths from 1.4 MHz to 20 MHz
Supports all WCDMA Bands on a Single Antenna Port. Transmitter
output power is 10 dBm
Tools & OS Support
Software selectable between the two LTE bands
1x Auxiliary Wideband RF Receiver for TX Sniff Mode
1x Auxiliary Wideband RF Receiver for GSM Sniff Mode
Designed and tested on Our QorIQ® Converge