CodeWarrior® Development Studio for MPC55xx/MPC56xx (Classic IDE) v2.10
Supported Devices
System Requirements
- 1.8 GHz Pentium® compatible processor or better
- Microsoft Windows XP/Vista/7®
- 2 GB RAM
- 2 GB hard disk space, 400 MB on Windows system disk
- CD-ROM drive for installation
- USB port for communications with target hardware
- Ethernet port for communications with target hardware (optional)
- 1.4 GHz Pentium® compatible processor or better
- Microsoft Windows XP
- 1 GB RAM
- 1 GB hard disk space, 400 MB on Windows system disk
- CD-ROM drive for installation
- USB port for communications with target hardware
- Ethernet port for communications
Support Policy
- Online help and documentation
- Includes 12-month technical support
- Free 30-day evaluation license available
Get Started
"How to" Videos (Licensing)
List of our most frequently asked questions in regards to licensing and registration of CodeWarrior® products.
Please contact NXP support for any additional questions or problems regarding your CodeWarrior® product. If you need to register or obtain a license for your CodeWarrior® product, please visit the CodeWarrior® License Information section.
License Manager Installers
These downloads contain the necessary software to install the FLEXlm license manager. The license manager software should be installed on the license server machine which will facilitate floating licenses for your NXP product.
Please locate below the appropriate download for your license server machine. If you are not sure, you should consult with your license server administrator.
Below is a table that outlines which Operating System versions we officially support and test with our license manager.
NOTE: Any installation or use outside of this scope will not be officially supported.
| Installer | Versions Supported |
| Windows | Win2003, Win2008, Win7, Win 8, Win 10 |
| Windows Server | 2019, 1903, 1909, 20H2 |
| Linux | Red Hat EP v5.x, Red Hat EP v6.x, SUSE 11 Ubuntu 12.04 |
USB Dongle Drivers
These downloads are applicable for using a USB dongle to license your NXP product. You should receive documentation within your USB dongle kit that has detailed instructions for getting your product up and running with a license tied to the dongle. These downloads along with the most recent Dongle QuickStart Guide are listed below for your convenience.
- lmtools for Windows (64-bit)
-
LMTOOLS is a graphical user interface to the license manager tools allowing setup and configuration of your FLEXlm license server.
- lmtools for Windows (32-bit)
-
LMTOOLS is a graphical user interface to the license manager tools allowing setup and configuration of your FLEXlm license server.
- USB Dongle Driver Installer
-
This driver is for use with CodeWarrior® Classic products on Windows.
PPCNEXUS third-party debug solutions
- P&E Microcomputer Systems:
- USB Power Architecture® Nexus MultiLink
- P&E In-Circuit Debugger for MPC55xx/MPC56xx
- Lauterbach Trace32 development Systems:
- JTAG Debugger for MPC55XX
- NEXUS Debugger and Trace for MPC55xx/MPC56xx
- Please read TargetingMPC55xx.pdf located in the Help\pdf folder of your CodeWarrior installation
- iSYSTEM iC3000 Development Tool Solution for MPC55xx/MPC56xx
- iC3000 with iCARD
- iC3000 with iTRACE PRO
- winIDEA build 9.6.92 or later is required
Specifications
- IDE version: 5.9
- Host platforms:
- Microsoft® Windows® XP 32- and 64-bit (Professional Edition)
- Vista® 32- and 64-bit (Business)
- Vista 32-bit (Home Premium)
- Microsoft Windows 7 32- and 64-bit (Professional Edition/Home Premium)
- Language support:
- Assembly
- C/C ++
- Build tools output formats:
- ELF/DWARF 2.0
- NXP S-Record
- MPC55xx device support:
- MPC5514E/G
- MPC5515S
- MPC5516E/G/S
- MPC5517E/G/S
- MPC5533
- MPC56xx device support:
- MPC5601D/P
- MPC5602B/C/P
- MPC5603B/C/P
- MPC5605B
- MPC5606B/S
- MPC5607B
- MPC5632M
- MPC5633M
- MPC5634M
- MPC5643L
- MPC5645S
- MPC5646C
- MPC5644A/B/C
- MPC5645B/C/S
- MPC5646B/C
- MPC5668E/G
- MPC5645S
- MPC5674F
- MPC5675K